Det's Guys What Clutch Setup Are You Using????

[RUTH'LESSDET]

I just got a ACT Heavy Duty pressure plate and i was wondering if i should go with a act six puck disk or a clutch net sprung hub 4 puck disk

[AceInHole]

I've got a SPEC Stage III, 4 puck sprung disk. If you want driveability I'd say def. get a spring disk. My clutch has a relative ease of engagement and it's holding power at 7psi so far...

[silnv]

I have a SPEC stage II kevlar.

[nrcooled]

Originally posted by silnv
I have a SPEC stage II kevlar.

Same here @ 14lbs

[kandyflip445]

Where can you get the Spec clutches for the KA?

[HaLo]

Blacktop SR, with s15 turbo, fidanza flywheel, 555cc injectors and 300zx mafs, fmic... and my clutch is:

ACT Stage one! (street disk, heavy duty pressure plate)

[SpeedRacer1]

The 6 puck is a little too much clamping power for Street use. If you are putting out fairly large amount of power and drag race then its a good clutch. I personally dont have an aftermarket clutch on, though I have an ACT street and 6 puck kit in my garage ready to go whenever the stocker goes.

[RUTH'LESSDET]

-s13 blk top
-HKS FMIC
-HKS 2530 turbo w/ext pip
-HKs cams 256 both intake and exhaust....I have to verify becuase my motor was said to have come like that so ill just put it for now.
-Greddy 3" down pipe
-HT 3" test pipe
-Apex-i dual N1's
-Z32 MAF
-TOMEI 555cc injectors
-Upgraded computer with Z32 MAF, 555cc injectors, boost cut removed, fuel cut removed, .....The works @4 bar fuel

-I already have a HD pressure plate from ACT just wanted to know what disk would be good, out of the two i put up to choose from or if you know any that are better.


NO STREET STRIP DISC My car will eat that for breakfast...especially when i crank up my boost...Im trying for any where from 280whp-300whp my summer time. I dont know if i can do it with this setup but im gonna try...Your responses are appreciated...thanx....RUTH'LESSDET

http://www.imagestation.com/picture/sraid49/p53ef24333945e4c56fd362d1076334d3/fcb180cd.jpg

http://www.imagestation.com/picture/sraid49/p5cb0e2a1f273388d48a437942503fb3a/fcb180d0.jpg

[240racer]

I have the 6-puck unsprung disk. It's pretty harsh. Also, the SPEC clutches are supposed to hold a lot more torque on the SR then they do on the KA. Don't know why, but that's what I have found so far.

BTW, when you say Det's guys, that's pretty generic. I thought maybe you wanted to know KA stuff since that's what I have. Try being a little more specific. if you had just said SR guys, that would work. Everybody on this board considers the word SR to mean a RWD SR20DET anyway.