PDA

View Full Version : CA Stock s14 Blacktop T28 Turbo + ECU's + Accessories


khmerpimpin
01-16-2009, 04:56 AM
All prices have shipping/paypal fees included (continental US only)
Any offers [aka lowballing] can be done through PM, no dibs, any offers in the thread will be ignored [unless its a reasonable offer for multiple items], I will also do items as a package and save you some coin.

$SOLD Stock T28 turbo never seen more than stock boost, comes w/ stock actuator

$SOLD Stock turbo inlet pipings

$SOLD Stock Oil/Water lines

$30 each s14 370cc Injectors (have 7)

also have s13/s14 sr20det fuel rail(s) [offer]

$25 Stock Turbo Elbow

$55 Zenki s14 (WC) MAF

$170 Stock WC Ecu

$135 Stock WE Ecu

$40 Sohc KA Ecu

$120 S15 Gauge Cluster

$175 S14 VTC Cam gear


paypal: [email protected]

Items will be shipped UPS Ground w/ tracking #'s

Whitesil80315
01-16-2009, 07:02 AM
Can you send me pics of the turbo to [email protected] and do you know if the turbo is BB?

thanks

jsasrsr
01-16-2009, 01:04 PM
same exact question as him ^^ except my email addy is [email protected]

khmerpimpin
01-16-2009, 02:42 PM
YES its a BB turbo


http://i42.tinypic.com/nex06p.jpg

http://i40.tinypic.com/33zejhl.jpg

http://i40.tinypic.com/1zpilo1.jpg

DALAZ_68
01-16-2009, 04:48 PM
ill take it if i can pick up...PM me (the turbo that is)

jssilc
01-16-2009, 05:22 PM
s14 turbo are half bb and thrust bearing only s15 are full bb fyi

khmerpimpin
01-17-2009, 05:13 AM
Items are located in Fresno, CA if interested in picking up anything PM me your phone number

S14DrifTmATic
01-17-2009, 08:48 PM
Will you do 350 shipped to 92114? Lmk

jmac636
01-17-2009, 10:19 PM
s14 turbo are half bb and thrust bearing only s15 are full bb fyi

I just disassembled an s14 t28 466541 chra and it is a full ballbearing CHRA. The S15 spec-r uses a special housing and inconel wheel. The housing is made to withstand higher heat and the wheel is able to handle higher levels of boost. The CHRA on the s14,s15 and the gt2560r are exactly the same,Full ball bearing.

DALAZ_68
01-17-2009, 10:19 PM
Items are located in Fresno, CA if interested in picking up anything PM me your phone number

ive PMed you for a package deal, lemme know shipped to 90031

jssilc
01-18-2009, 01:22 PM
I just disassembled an s14 t28 466541 chra and it is a full ballbearing CHRA. The S15 spec-r uses a special housing and inconel wheel. The housing is made to withstand higher heat and the wheel is able to handle higher levels of boost. The CHRA on the s14,s15 and the gt2560r are exactly the same,Full ball bearing.

please call garett or turbo buy garrrett the front half is ballbearing rear section it thrust

DALAZ_68
01-18-2009, 01:31 PM
im waiting ...........

jspec240
01-18-2009, 01:32 PM
rendered inaccurate.

khmerpimpin
01-18-2009, 02:00 PM
I second that... I dont care if you took it apart. If it is full ball bearing is must have been fabricated but s14 never came with full ball bearing turbo. thats why the s15 are alot more expensive.

what up drew, its D. you still interested in your rims back? I kinda want 5 lug now.

jmac636
01-18-2009, 02:05 PM
Bump for the guy selling the s14 bb turbo. S14 aus model was journal bearing turbo. I don't know the part number on that model. 466541-7001 chra is a ball bearing same as gt2560r,t28r and the s15 turbo. You guys read something and you start quoting it. I have taken journal bearing turbo apart as well. Their is no way you can install half the parts from a journal bearing turbo in a ball bearing turbo. You can only swap housings,compressor wheels and complete chra's. The s15 has different version of turbos s15 automatic were exactly the same as the s14. The spec-r has a better turbine shaft/wheel made from inconel and a divider in the exhaust housingand also the exhaust housing is made with nickel for heat dissapation. I hope someone benefits from this info. Also btw you can pay $730 for the S15 spec r on fr sport or west covina has them for $687 both are plus shipping. A new CHRA cost $783 466541 part number.

jmac636
01-18-2009, 02:17 PM
All that matters is the garret number, everything else just confuses matters

466541 = ball bearing
466543 = bush bearing

for the second bit of the number

-001 = S14 turbo (no splitter between wastegate and turbine exit)
-002 = S15 turbo (splitter between wastegate and turbine exit)

serial numbers are your friend

DALAZ_68
01-18-2009, 03:07 PM
turbo and elbows sold to, quit ur bitching...ill let u know how it does :mephfawk:

khmerpimpin
01-20-2009, 11:54 PM
bump, it up

harlockssx
01-21-2009, 10:26 PM
Will take the lines...

khmerpimpin
01-21-2009, 10:54 PM
Will take the lines...

waiting for payment, paypal = [email protected]