View Full Version : car feels like a sohc
bigboto_boy
01-07-2009, 11:06 PM
ok so i have a ka24de and it is ridiculously slow like super slow and
a homie of mine said it may be a vack leak or sumthing like that but he is not to sure... car has headers but are rusted to the dome lol and i think it has a exhuast with a ricer dual tip lol
just got the head rebuilt and head gasket replaced
so what can be the problem
thanks
bigbotoboy671
jakerps13
01-07-2009, 11:14 PM
Check cam timing and ignition timing. 46 really?
SidewayZ-s14
01-07-2009, 11:19 PM
46 really?
LOOL! :fruit:
codunc
01-07-2009, 11:22 PM
sohc and doch don't feel all that different...
bigboto_boy
01-07-2009, 11:30 PM
Check cam timing and ignition timing. 46 really?
LMAO IM ONLY 16 ill check them tomorrow at school
holybushoffire
01-07-2009, 11:31 PM
ok so i have a ka24de and it is ridiculously slow like super slow
Welcome to the world of stock 240's:duh:
bigboto_boy
01-07-2009, 11:33 PM
sohc and doch don't feel all that different...
yah but i felt my homies sohc with mods SLOW and i felt my other friends dohc stock and i can fell the difference to be exact it might be slower than a sohc lol
bigboto_boy
01-07-2009, 11:35 PM
Welcome to the world of stock 240's:duh:
wonders lol i went from a 13 sec honda to a 20 sec 240 haha ohwell its worth it more things to do with rwd than fwd
roboticnissan
01-08-2009, 12:10 AM
well i guess your 240 is 20 sec mine is 15 lol^^^^^^^^
lflkajfj12123
01-08-2009, 12:12 AM
oh my fucking god shut up
DataXUnknown
01-08-2009, 12:18 AM
Get a turbo or engine swap. End of story.
charlie321
01-08-2009, 12:24 AM
maybe you should check to see if the second cam is in there, dur!
haha jk, i have a single cam, i don't think its that slow compared to dual cams.
Hashiriya415
01-08-2009, 01:34 AM
too much weight?
different diff gear?
tires to big in overall diameter?
cam timing off depending on how much you cut the head?
improper head torque?
did you inspect the head bolts? clean and lubricate?
poor valve job?
if any valve job was done check your valve clearance? there is 37 different shim sizes available from Nissan
bad sensors?
poor fuel?
improper oil?
ac pump constantly on?
dirty air filter?
clog somewhere in intake?
cat clogged up?
resonator clogged up?
muffler clogged up?
detuned ECM for better mpg?
improper spark plug gap?
bad spark plug wire?
ignition timing?
throttle cable out of spec?
throttle body not opening fully?
maybe the way you drive, rev the car to redline, don't shift like my friend at 2-3K rpm and complain that its slow.
cam switched? intake and exhaust are different
clogged fuel injector(s)? not getting proper mist. Or wrong injectors, to big?
egr, including solenoid that controls the egr?
bigboto_boy
01-08-2009, 03:26 PM
maybe you should check to see if the second cam is in there, dur!
haha jk, i have a single cam, i don't think its that slow compared to dual cams.
lmao haha just a thought cause my homie said it feels really slow like somethings wrong with it
bigboto_boy
01-08-2009, 03:32 PM
too much weight?
different diff gear?
tires to big in overall diameter?
cam timing off depending on how much you cut the head?
improper head torque?
did you inspect the head bolts? clean and lubricate?
poor valve job?
if any valve job was done check your valve clearance? there is 37 different shim sizes available from Nissan
bad sensors?
poor fuel?
improper oil?
ac pump constantly on?
dirty air filter?
clog somewhere in intake?
cat clogged up?
resonator clogged up?
muffler clogged up?
detuned ECM for better mpg?
improper spark plug gap?
bad spark plug wire?
ignition timing?
throttle cable out of spec?
throttle body not opening fully?
maybe the way you drive, rev the car to redline, don't shift like my friend at 2-3K rpm and complain that its slow.
cam switched? intake and exhaust are different
clogged fuel injector(s)? not getting proper mist. Or wrong injectors, to big?
egr, including solenoid that controls the egr?
i checked the plugs there was a lil oil on them so it might be misfiring also
oh and about redlining it i dont even think it will reach redline lmao
and im getting a new hks hipower for two bills from my homie see if that helps and new oil pan gasket due to a lil leakage and mobil1 oil oh and new plugs hope these things satisfie me
the head and gasket wasnt done by me
thanks for ur time people
bigbotoboy671
Hashiriya415
01-08-2009, 08:56 PM
now that you see you got oil on plugs, do a leak down test.
maybe those headers were made in a garage by somebody that has no clue about making headers so you are loosing power now. Length and diameter must be matched according to the engine
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.