s13 sr shifter parts(what do i need)

[CmR333]

Ok i was modifying my shifter today and came across a weird dilemma. I was cutting the stock shofter while it was in the car to change the angle of it to fit the rx8 and the shifter popped out.. i have never removed the shifter before so im not to sure what all hold it together. what was in there is a small palstic ring that was on top and the shifter was sitting in the white cup with the two pegs in it. there was a snap ring on top of it all but it seems to small to snap into anything. i have 2 pics of the assembly i took out and the 3 parts that came out with it. im not to familar with the sr trans and i know there cant be to much to it. wanna help me out here guys?

http://i252.photobucket.com/albums/hh19/cmr333/IMG00005.jpghttp://i252.photobucket.com/albums/hh19/cmr333/IMG00006.jpg

[projectRDM]

There's another larger snap ring. Yours seems to have gone away. You're also missing the wave washer that sits below the pivot.

[CmR333]

ok so let me see if i got this....from the bottom up it goes. wave washer,white cup bushing thing,shifter,top plastic ring. then big then little snap ring? If so can i get the ka guts from a ka trans? i was wanting a short shifter but im not wiling to hack it up to make it work on my car. is there a nice set of spherical bearings that i can get for the stock stick? thanks

[rb25_s13*CHUKI]

Yes you can use the snap ring and wave washer from the ka.. you can use the ka shifter and plate as well.. And your shifter look funkay

[CmR333]

i havent dressed the welds but i made them beefy because of the bend. its about 2" shorter and is set perfect for the way i like to drive. i just wish i could shorten the throw.thanks for the answers

[JRas]

I just messed with mine yesterday.. removed it to pour in new fluid.

it's the c-clip that holds it in, you will need snap ring pliers to remove and put it back on available at sears or an autostore

[handinpants]

yeah its the c clip. i had mine come out when i was driving... but i fixed it, and later bought a b&m short shifter. you know i have a shifter thing for sale in my sale thread, for $15 with free shipping, if you want an extra one in case this one doesn't work for you

[projectRDM]

ok so let me see if i got this....from the bottom up it goes. wave washer,white cup bushing thing,shifter,top plastic ring. then big then little snap ring? If so can i get the ka guts from a ka trans? i was wanting a short shifter but im not wiling to hack it up to make it work on my car. is there a nice set of spherical bearings that i can get for the stock stick? thanks

KA transmission is the exact same so you can use KA parts. You knew that.

[CmR333]

just had to make sure lol thanks for the info guys it helped alot.