Camo
01-06-2009, 02:19 AM
Little back story....my current car started out a shell like most, swapped over the suspension and motor from the previous car which I wrecked to shit through various drifting accidents....
P3190113 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172740225/)
boso2 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172740427/)
blkhatch on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3173572784/)
Drove/drifted it like that for about a year I think. Stripped the interior, bent my own roll bar, added a few more goodies here and there. Nothing spectacular. Pretty basic diy drift car. Then I briefly toyed with the idea of an SR20. That lasted about 2 months. I was about to drop 2-3k in the motor, go 2871, pfc, ect...shoot for 350-400hp. That would be kinda pushing it for me with an SR though I've had an LS1 swap sitting in my garage for about 2-3 years collecting dust. Just never had the time to do all the fab work to get it in the car and get it together. I finally just said **** it. Sold my SR and ordered a swap kit from Daft. I haven't driven the car in a couple of months and I've kind of been dicouraged about working on it. It looks so sad out there on mismatched rims and all taken apart. I've been driving my grandma's 240, yea I said grandma's, and it kinda sucks. Its super clean inside and out, a real nice car but its slow and rides too smooth. I can't take it anymore. Enough is enough. I finally mustered up some energy to start on my project again. Here we go....
Here we are after we removed the 30mm overs and began prep for the 50mm's.
P1050001 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3173580742/)
P1050006 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3173581074/)
P1050007 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172748531/)
YAY!!!! lots more room! Also not in pics, I filled the wholes where we folded the inner fender over with non water obsorbing spray foam to keep moisture and debris from coming off the wheels and flying into the back of the car.
This is where things get a little scary. But dont worry, I have a plan!
P1060012 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172754173/)
P1060014 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172754491/)
P1060010 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172753899/)
P1060015 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3173587876/)
P1060018 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172755823/)
P1060016 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172755099/)
P1060017 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3173588480/)
Structural integrity? Whats that??? Tommorow Im gonna get the bottle filled for the welder and start stitching everything that has a seam up front. I plan to reinforce the frame/tower by welding a bar from the towers to the frame rails and then sheeting that in to keep the shit off the road from getting through the wheel wells. That should be sufficient. For the core Im going to use some light 1/4" square metal are something similar. I really only need something that will hold the radiator and headlight brackets in place. I think I may also make some fender braces before my new front fenders arrive. I've got alot of other stuff I plan to do before this thing hits the track so I'll be updating as I go along...
P3190113 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172740225/)
boso2 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172740427/)
blkhatch on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3173572784/)
Drove/drifted it like that for about a year I think. Stripped the interior, bent my own roll bar, added a few more goodies here and there. Nothing spectacular. Pretty basic diy drift car. Then I briefly toyed with the idea of an SR20. That lasted about 2 months. I was about to drop 2-3k in the motor, go 2871, pfc, ect...shoot for 350-400hp. That would be kinda pushing it for me with an SR though I've had an LS1 swap sitting in my garage for about 2-3 years collecting dust. Just never had the time to do all the fab work to get it in the car and get it together. I finally just said **** it. Sold my SR and ordered a swap kit from Daft. I haven't driven the car in a couple of months and I've kind of been dicouraged about working on it. It looks so sad out there on mismatched rims and all taken apart. I've been driving my grandma's 240, yea I said grandma's, and it kinda sucks. Its super clean inside and out, a real nice car but its slow and rides too smooth. I can't take it anymore. Enough is enough. I finally mustered up some energy to start on my project again. Here we go....
Here we are after we removed the 30mm overs and began prep for the 50mm's.
P1050001 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3173580742/)
P1050006 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3173581074/)
P1050007 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172748531/)
YAY!!!! lots more room! Also not in pics, I filled the wholes where we folded the inner fender over with non water obsorbing spray foam to keep moisture and debris from coming off the wheels and flying into the back of the car.
This is where things get a little scary. But dont worry, I have a plan!
P1060012 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172754173/)
P1060014 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172754491/)
P1060010 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172753899/)
P1060015 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3173587876/)
P1060018 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172755823/)
P1060016 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3172755099/)
P1060017 on Flickr - Photo Sharing! (http://www.flickr.com/photos/[email protected]/3173588480/)
Structural integrity? Whats that??? Tommorow Im gonna get the bottle filled for the welder and start stitching everything that has a seam up front. I plan to reinforce the frame/tower by welding a bar from the towers to the frame rails and then sheeting that in to keep the shit off the road from getting through the wheel wells. That should be sufficient. For the core Im going to use some light 1/4" square metal are something similar. I really only need something that will hold the radiator and headlight brackets in place. I think I may also make some fender braces before my new front fenders arrive. I've got alot of other stuff I plan to do before this thing hits the track so I'll be updating as I go along...