arp wheel studs

[zaquanh]

does any other company carry them other than spl?

for s14

[GSXRJJordan]

You need 4 lug or 5 lug? I've got some 60mm ones already pressed into 4 lug front hubs I could ship you.

[Teknolust72]

You dont want to use Peak Performance wheel studs?

[CNDC]

summit racing carries them.

[lflkajfj12123]

nismo also makes some ;o

[Rittmeister]

I think he's asking which P/N to use for S14. I'd be interested to know also, since my Attain front hubs use S14 sized knurls for the wheel studs.

[Homer_Simpson]

summit racing carries them.
That's where I've got my fronts and rears at (ARP).

Edit: I actually got the fronts from Jegs, here's the link http://www.jegs.com/webapp/wcs/stores/servlet/KeywordSearchCmd?storeId=10001&catalogId=10002&langId=-1&N=0&Ntt=070-100-7715&Ntk=all&Nty=1&D=070-100-7715&Ntx=mode%2Bmatchallany&Dx=mode%2Bmatchallany&searchTerm=070-100-7715. (http://www.jegs.com/webapp/wcs/stores/servlet/KeywordSearchCmd?storeId=10001&catalogId=10002&langId=-1&N=0&Ntt=070-100-7715&Ntk=all&Nty=1&D=070-100-7715&Ntx=mode%2Bmatchallany&Dx=mode%2Bmatchallany&searchTerm=070-100-7715)
These are IS300 studs, I was going to try the EVO studs but for some reasons went with these. The rears ARP part number is on here some where, just do a search.

Edit: ARPs on my S14 front hub.
http://photos.freshalloy.com/gallery/d/41165-2/DSCN0016.JPG

[zaquanh]

oh yea sorry i need 5 lug , i need the front

and no part number i just wasnt sure who else some them

peak performance ones are good ,i was going to get some nismo 60mm but they where for the rear

i havnt looked into them much ,i was just told that the arp ones were the best ,

would you advise to get peak performance or nismo instead?

on s14 front
(14 mm knurl)

on a s13 front/rear and s14 rear
(12.75MM Knurl)

[5t341tH]

yes i remember arp makes em but in a different thread pitch. iirc its 1.5

[Teknolust72]

Peak Performance and Nismo ones are good. I prefer Peak because its more affordable.

Peak's are available in different knurl sizes so you should be able to find the right ones you need.

And I believe ARP ones are the wrong thread pitch, so you would have to get new lug nuts if you went with them.....

[Edgar]

Anyone know what size on z32 5lug conver cars? How much more extended are these?

[sean350z]

yes i remember arp makes em but in a different thread pitch. iirc its 1.5

They actually make them in 12x1.25 too for a Suby. A few 350z guys run these on their hubs with success. They are the exact same as the Evo studs but with the 'nissan' pitch. The part number is 100-7716. These will fit front S14 hubs only. 565'' Knurl, though I think the knurl length might be shorter than stock but if T2 350z's track them with success they should hold well for drift/track 240's.

[Homer_Simpson]

They actually make them in 12x1.25 too for a Suby. A few 350z guys run these on their hubs with success. They are the exact same as the Evo studs but with the 'nissan' pitch. The part number is 100-7716. These will fit front S14 hubs only. 565'' Knurl, though I think the knurl length might be shorter than stock but if T2 350z's track them with success they should hold well for drift/track 240's.

The knurl length on my front ARP is shorter than the OEM, but so far so good.

[Rittmeister]

I believe Z32 rear and S13 rear/front are all the same knurl size.

S14 front is different, but I think S14 rear matches the above.

ARP, for the sizes that most closely match S13 at least, are 12x1.5 threads as stated above. I'd use ARP before Nismo, they're much stronger. Don't know about Peak or whatever. I had ARP in my car when it was 4-lug, but need to get long studs now that I'm 5-lug. ARP for the rear (Z32) is easy, but front is still up in the air, as the Attain 5-lugs use S14 size.

[Edgar]

I believe Z32 rear and S13 rear/front are all the same knurl size.

S14 front is different, but I think S14 rear matches the above.

ARP, for the sizes that most closely match S13 at least, are 12x1.5 threads as stated above. I'd use ARP before Nismo, they're much stronger. Don't know about Peak or whatever. I had ARP in my car when it was 4-lug, but need to get long studs now that I'm 5-lug. ARP for the rear (Z32) is easy, but front is still up in the air, as the Attain 5-lugs use S14 size.

I was going to pick up some Peak but looks like I am leaning towards some ARP. I will be ordering them Friday. 12x1.5, I hope this is right lol