S14 VLSD fits S13?

[hkssilvia]

I need some inputs for VLSD swap.

Will S14 VLSD fit S13 without mod?

What is the average price for S14 VLSD?

Thanks in advance.:rolleyes:

[mrmephistopheles]

Originally posted by hkssilvia
Thanks in advance.:rolleyes:

WTF is with the :rolleyes: ? That makes me not want to answer your questions! I'll interpret that as an unintentional mistake on your part and answer them anyway (what a nice fella I am!).
S14 VLSD will fit on S13 if you swap the rear cover (2 minute job)
Average price varies with who you talk to. Anywhere from $150-$350. A good price is 200-250.
Watch your smilies next time, pal!

-Kevin

[hkssilvia]

I will study the faces in the Forum Rules.

Kevin, do I also need the LSD stub axles from S14?

What components does 'Complete pumpkin' include for the swap (putting S14 VLSD into S13) ? I want to make sure if I have every components I need for the swap.

Thanks,
Johnny

[huntz0r]

"Complete" it should include the output shafts, carrier and internals. Output shafts will bolt up to what you have already, but if swapping a VLSD from a car with ABS to a non-ABS car (or vice versa) you need to change driveshafts.. ABS driveshaft is an inch or two shorter. That's it.

[drift freaq]

most S14 VLSD's had abs and the ABS driveshaft is only 1/2 inch shorter not 1 to 2 inchs . get your facts straight man. oh yeah check out my faq in the section if you want to know the ins and outs of VLSD's in our cars.

[hkssilvia]

I do not have ABS on my S13, and I assume the VLSD from a ABS equipped S14. So I think I am in this category:

'If you do not have ABS, you will have two options. First, you can buy the ABS driveshaft. Second you can buy the non-abs diff input.' This is what I found from FAQ section. Need to credit to this person.

Can someone elaborate these a little more?

Will the S14 ABS driveshaft fit my non-ABS S13?

That half inch short bothers me now...

Thanks,
Johnny

[drift freaq]

you cannot put a S14 driveshaft in a S13. The center support bushing on the S14 driveshaft is on the rear half . On the S13 it is on the front. no driveshaft swap capability sorry.
Get yourself a one piece with replaceable u joints, or if you have some cash a one piece Aluminum. you will save around 15lbs in rototating mass that would cause parasitic drag on your engines HP.

[killjoy]

Not most of the VLSD's in s14's had ABS. All of them did. Any ABS s14 has LSD and vice versa. Its the same package. I used to think that all SE's had LSD but ABS/LSD is an option.

[hkssilvia]

I think the best solution for my swap is to put a non-ABS VLSD from a S13 to my non-ABS S13. Anyone had done that before? Are all canadian S13 equipped with VLSD? Hopefully, the ABS and VLSD are not a single package for S13 in Canada.