S13 Silvia bumper bracket?

[Impact Black]

Ok, so I installed my S13 frontend, however the middle part of the bumper, right under the headlights, is sagging. I'm curious if there is a bracket that goes there and if so does anyone know where to get it?

[yokotavia]

go buy strips of metal from lowes or something, like 1 inch wide 6 inches long and make "L" brackets from the bottom of the headlights to the bumper.

thats what we did on my friends 13.

should work fine for you

[Impact Black]

ehh, really didn't want to jimmy rig it.

[4x4le]

That is not really jimmy rigging it. Your other option is to but a 30lb real bumper under it that is going to block your intercooler. That is what normally holds it up.

Im going to do something very similar very soon to mine. I think Im actually going to weld a small tab of aluminum to my intercooler to hold the bumper up in the middle.

[iLagX]

are you talking about the healight bracket or the bumper support?
you can use the stock bumper reinforcement by redrilling the holes to make it fit.

[Impact Black]

I've got the headlight brackets that hold the headlight.

Is there a part where there should be a bracket that connects the bumper to the headlight support?

I've been looking for an FSM that has the S13 Silvia front, but haven't had luck so far.