SR Spark plug wells filled with gas

[SR2Zero]

I've installed my SR... And I'm attempting to start it. However, Whenever I try, It'll attempt to crank, won't start, and I'll stop turning the key. The spark plug wells are then filled with gas, the engine wont turn over, I'll have to basically open the wells, suck the gas out... repeat. Solutions...? I'm lost.:hyper:

[flip3d]

Get new injector o-rings. Upper and lower. You can use the ones from 300ZX. Don't forget to lube em up.

Get some new plugs too in case you fouled the ones in there now. NGK V-powah! They're like $2 a plug

[tire_machine]

^exactly that flip3d said (not to sound like a broken record or anything), but it's your injector o-rings. had the same problem.

[SR2Zero]

Get new injector o-rings. Upper and lower. You can use the ones from 300ZX. Don't forget to lube em up.

Get some new plugs too in case you fouled the ones in there now. NGK V-powah! They're like $2 a plug

I just put on new o-rings, upper and lower from a 300zx. New plugs also, NGK. :cry:

???

[SR2Zero]

EDIT:
I realized the problem with the o-rings. Hope this fixes it.

[S13Sr20detSilvia]

be very careful do not attempt to keep CRACKING!! you can lock your motor! the cylinders trying to compress gas will bend a rod.. and damage ur cylinder walls.. i have seen many people bring their cars into our shop with this problem all because they didnt know what they where doing and didnt want to spend the cash to get it fixed and end up ruining their engine!