PDA

View Full Version : s15 t28 coolant question


robunicu
12-25-2008, 09:10 AM
ok im in the process of doing all my oil/coolant lines

and im wondering, for the coolant lines, can i just cut the OE lines, like where the bend is, and then connect them with hoses to feed/return.

also, does it matter witch one is feed, and whitch one is retur?!?!

all this for KA

http://i109.photobucket.com/albums/n44/robunicu/dore/S7301073.jpg

jmac636
12-26-2008, 07:00 AM
Yes sir, On my s14 kat with a Sr t25 I just cut the stock hardlines and attached 5/16" hose and ran it to the throttle body. When looking at the throttle body from the front mine had a 5/16" bypass hose(about a 3" u bend hose). I removed that and created a loop through my turbo back to the throttle body. On the turbo I use the water line closest to the block as the inlet and the other as the outet. The s13 is different though. I can't describe where and how to run the hoses on the s13. Hope this helps.