Big brakes/five lug /clutch flywheel/Intercooler+radiator/misc

[Racer X]

I have a stacked Intercooler (spearco)/Radiator(hpi 12x24x3) combo comes with hot and cold pipes (set op for greddy intake manifold for s13), mounts rad hoses, couplers t bolt clamps, blow off valve (blitz super sound) electric fans. I have $1300 invested in to this set up SOLD shipped

I have Jun chromoly flywheel and custom made clutch kit. (Act full face disk and Clutchnet.com double diaphragm pressure plate. (twice the normal clamping force) this set up held 22psi out of a gt3071r no problems has about 300 miles on it. very smooth to drive with SOLD

5zigen fire ball exhaust+ greddy down pipe+ test pipe welded in $100 pick up only

Big brake kit for the front comes with willwood calipers, pads clips brackets s lines etc, brembo 13" single piece rotors,(five lug)
SOLD

300z rear brake kit with ss lines and brembo cross drilled rotors SOLD (6k miles) shipped

five lug swap with s14 knuckles. Oem bearings, no cheap ass aftermarket conversion shit that doesn't hold up SOLD shipped less than 6k miles (one rear bearing in brand new

sr20det coils $15 each shipped
sr20det cas $sold
freddy oil pan $25 shipped
blacktop valve cover $30 shipped
300zx NA limited slip with j30 axles $175 pick up only
Nex racing bucket with brackets $75 pick up only
Jdm S14 front bumper (unpainted) sold
water pumps/ stock sr20det oil pans, other misc parts $15 shipped

http://i179.photobucket.com/albums/w315/professor_speed/9-23-07022.jpg
http://i179.photobucket.com/albums/w315/professor_speed/9-23-07021.jpg
http://i179.photobucket.com/albums/w315/professor_speed/DSCN0781-1.jpg
http://i179.photobucket.com/albums/w315/professor_speed/DSCN0785-1.jpg
http://i179.photobucket.com/albums/w315/professor_speed/DSCN0787-1.jpg
http://i179.photobucket.com/albums/w315/professor_speed/DSCN0790-1.jpg
http://i179.photobucket.com/albums/w315/professor_speed/DSCN0795.jpg
http://i179.photobucket.com/albums/w315/professor_speed/DSCN0796.jpg
http://i179.photobucket.com/albums/w315/professor_speed/DSCN0807.jpg

All Items are best offer, I need this stuff out of my garage

612 242 7428 leave a message if I don't answer I'll call back

thanks Mike

[jsasrsr]

pmd you on the brake kit...

[traxx07]

fmic ? price ?

[wafflez66]

I have a stacked Intercooler (spearco)/Radiator(hpi 12x24x3) combo comes with hot and cold pipes (set op for greddy intake manifold for s13), mounts rad hoses, couplers t bolt clamps, blow off valve (blitz super sound) electric fans. I have $1300 invested in to this set up $400 shipped


it is in the original post

[andmattsayd]

you have PM's.

[Racer X]

All pm's replied to.

[boostlee]

Hey, can u send me pics of the clutch and flywheel, also might just go with the oil pan.
lmk.

[Racer X]

I keep getting price shipped price pm's the price includes shipping in the 48 states unless noted

[Racer X]

pics of the clutch are right on top

[Volchok]

does that oil pan have 1/8 NPT ports on it for additional sensors?

[CamryOnBronze]

Did the brakes ever sell?

[singlecamslam]

pics of oil pan? dents?

[DRFT180]

Willing to split up the 5-lug stuff? I need S14 front hubs with the spindles

[dangarnett]

I'm very interested in the rear 300z brakes, pm'd u

[reccakun08]

with the front brake setup did you use stock brake master cylinder?

[Racer X]

does that oil pan have 1/8 NPT ports on it for additional sensors?
12-23-2008 12:08 PM yes

I'm very interested in the rear 300z brakes, pm'd u replied

Willing to split up the 5-lug stuff? I need S14 front hubs with the spindles Id prefer not to

pics of oil pan? dents? one has a minor dent that was pounded out the other is as nice as can be expected, after this post ill see if I have pics hosted

Did the brakes ever sell? still for sale

with the front brake setup did you use stock brake master cylinder? I use a 300z mc

[Xclusive_racer]

I have a stacked Intercooler (spearco)/Radiator(hpi 12x24x3) combo comes with hot and cold pipes (set op for greddy intake manifold for s13), mounts rad hoses, couplers t bolt clamps, blow off valvehttp://images.intellitxt.com/ast/adTypes/mag-glass_10x10.gif (http://zilvia.net/f/sale-items/230648-big-brakes-five-lug-clutch-flywheel-intercooler-radiator-misc.html#) (blitz super sound) electric fans. I have $1300 invested in to this set up $400 shipped

Ill take this off your hands can you hold it for me until the 5th so i can see if it will fit my set up??? Im flying outtah florida today and going back to cali...please hold it for me....all that stuff is only 400$ shipped??

[Ceepo]

Would that intercooler setup fit a s14 with a s13 sr20det???

[airforceone451]

part out the front rotors only?

[Racer X]

id does not come with the 2 piece rotors. im keeping those. it comes with new one piece rotors

[singlecamslam]

dibs on the oil pan, waiting for pics. And i was talking about the greddy or the freddy one.

[prokronic36]

lmk know if you want the just sell the rear calipers to 96817 thx

[tramp_drift240]

i believe i pm'd you about the whole five lug setup with knuckles, as a set.

[Racer X]

that price includes knuckles i know its cheap cant believe it hasn't sold every thing is going on ebay very soon

[blink182house]

amazing prices, wish i wouldnt have already bought a lot of that stuff!!! best of luckt o you!!!

are you willing to sell throttle cable bracket (that is on intake mani)? I'ma assuming you're using freddy intake mani and s13 dohc throttle cable, i need bracket! paypal ready, shipped to 38632, PM me back!

are you trying to sell engine damper, oil filter relocation, brake master heat shield?

[ANVIL]

interested in the lsd+axles if you decide you want to ship. pm me if you change your mind

[Racer X]

amazing prices, wish i wouldnt have already bought a lot of that stuff!!! best of luckt o you!!!

are you willing to sell throttle cable bracket (that is on intake mani)? I'ma assuming you're using freddy intake mani and s13 dohc throttle cable, i need bracket! paypal ready, shipped to 38632, PM me back!

are you trying to sell engine damper, oil filter relocation, brake master heat shield?

the bracket is just a modified stock one. cable is stock ka24e. make offers on the rest of the stuff if its good ill sell,

I cant believe this stuff has not sold at these prices, I taking huge losses

interested in the lsd+axles if you decide you want to ship. pm me if you change your mind

I'll ship it but I don't even want to think of what its going to cost

[blink182house]

im not sure of brand or really a price for the items i requested man, if you want, just give me a price on them and shoot me a pm. thanks and glws!

[Racer X]

im not sure of brand or really a price for the items i requested man, if you want, just give me a price on them and shoot me a pm. thanks and glws!
Yesterday 11:59 PM
pm sent, so let me know

[jmauld]

Big brake kit for the front comes with willwood calipers, pads clips brackets s lines etc, brembo 13" single piece rotors,(five lug)
$500 (1k miles maybe) shipped


Do you have any pictures of this setup?

Can you provide details on which calipers you're using (including the piston diameter), what mounting bracket, and is the rotor an off the shelf unit from another car? If not, where can replacements be purchased.

If I were to get the front kit, would you supply details on the two piece rotor that you're using so I could duplicate that?

[CamryOnBronze]

^ I sent payment for the brakes yesterday, I think he just forgot to post in the thread. Just so you know.

[305_hustler]

sent you a pm

[305_hustler]

pm sent on the fron mount

[jmauld]

^ I sent payment for the brakes yesterday, I think he just forgot to post in the thread. Just so you know.

Well that sucks for me. Looks like you got a good deal.

[Racer X]

more price drops buy buy buy

[spicywhitemustard38]

pm u about the rear brakes

[tramp_drift240]

pm in progress for complete five lug setup.

[Racer X]

five lug is sold

[305_hustler]

called about the front mount LMK somthing

[305_hustler]

money sent for the FMIC

[Racer X]

to all who have paid for parts if it hasn't shipped yet it should go out Monday thanks

[CamryOnBronze]

Have the brakes shipped yet? Haven't heard one way or the other, thanks!

[dangarnett]

I'm still waiting on those rear Z brakes, you ship them on monday or what?

[305_hustler]

whats the deal on the front mount? still havent recieved it????

[dangarnett]

I still haven't received the rear z brakes or heard from you about them so I'll be filling a paypal dispute.

[handinpants]

pm sent on oil pan

[Z33dori]

do you still have the S13 SR valve cover