SR20DET Alternator, Power steering pump, A/C F/s

[racer98]

SR20DET Alternator, Power steering pump & A/C compressor


all come with mount and tensioner for $75 shipped each.

[racer98]

http://i43.photobucket.com/albums/e359/racer98/DSCN4009.jpg
http://i43.photobucket.com/albums/e359/racer98/DSCN4010.jpg
http://i43.photobucket.com/albums/e359/racer98/DSCN4011.jpg
http://i43.photobucket.com/albums/e359/racer98/DSCN4013.jpg
http://i43.photobucket.com/albums/e359/racer98/DSCN4014.jpg
http://i43.photobucket.com/albums/e359/racer98/DSCN4021.jpg
http://i43.photobucket.com/albums/e359/racer98/DSCN4020.jpg
http://i43.photobucket.com/albums/e359/racer98/DSCN4021.jpg
http://i43.photobucket.com/albums/e359/racer98/DSCN4022.jpg
http://i43.photobucket.com/albums/e359/racer98/DSCN4023.jpg



$99 shipped
http://i43.photobucket.com/albums/e359/racer98/CopyofDSCN3909.jpg

$1200 shipped long block. Compression is 160psi.
Short block is $700 shipped
parts off motor
Fuel rail 370cc injectors $80
Altinator / starter / HICAS PS Pump with mount / A/C $75 each
Valve cover $100 shipped
Spark plug cover $40
harness $150
Ign chip $75
Coil packs $75 for all 4
Head $375 shipped
Short block $700 shipped
Crank pulley $50
Intake manifold $40 shipped
Throttle body 65mm $35 with TPS
Oil tree $75 shipped
transmission gasket $40 shipped
T25 turbo $200shipped.
Water lines $40
Turbo water and oil lines $40
Water necks x 3 pcs $75
motor mounts $20
maf hose and turbo pipe $35
Fan and clutch $25

http://i43.photobucket.com/albums/e359/racer98/IMG_2001.jpg
http://i43.photobucket.com/albums/e359/racer98/DSCN3876.jpg
http://i43.photobucket.com/albums/e359/racer98/DSCN3878.jpg
http://i43.photobucket.com/albums/e359/racer98/IMG_1999.jpg


$599 shipped Nismo LSD (3.90) NISMO 2-way
http://i43.photobucket.com/albums/e359/racer98/DSCN3891.jpg
http://i43.photobucket.com/albums/e359/racer98/DSCN3892.jpg

[Tbnismo]

where are you located i am interested in the starter the harness and the ecu if you have it

[racer98]

where are you located i am interested in the starter the harness and the ecu if you have it

So.cal 91316


Thanks for the offer for the harness but not parting out the starter harness from the main engine harness. ECU Have the E5 one for sale but its a mines with version.

[chituntang]

So, can you give me some information for the harness?
What it is for?
What ecu does it use?
You are selling too many parts, both S13 and S14.
I am looking for a harness that will let me put a S13 sr into a 95 240sx. I have an E5 ecu if it matters.

Thank you
Jesse

[racer98]

So, can you give me some information for the harness?
Sure.......

What it is for?
what do you need ?
What ecu does it use?
the S14 harness ? or the S13 harness

You are selling too many parts, both S13 and S14.
ok................
I am looking for a harness that will let me put a S13 sr into a 95 240sx. I have an E5 ecu if it matters.
I have a S13 harness for sale with an E5 ECU for $300




.................................................. .:mepoke:

[chituntang]

is the harness converted or just like it is off of the Silvia?
And can you do it without the ecu?

[racer98]

is the harness converted?
No the harness is not converted.

or just like it is off of the Silvia?
Yes, it's uncut and unmodified.

And can you do it without the ecu?
You want the harness I have from the black top motor to sell it to you with out the ECU ? but what are you going to do about the ignitorc chip ?

[chituntang]

My car was swapped about a year ago. I really wanted to redo the harness long time ago, and every since I removed the AFC NEO, my car runs like shit. I attempted to repair the harness but no success. I am going to give one last try and if it does not work, I will just buy another set. It is just too expensive to buy a new sr harness, find another ka harness, and pay some dube to convert the harness.

Thanks
Jesse

[racer98]

My car was swapped about a year ago. I really wanted to redo the harness long time ago, and every since I removed the AFC NEO, my car runs like shit. I attempted to repair the harness but no success. I am going to give one last try and if it does not work, I will just buy another set. It is just too expensive to buy a new sr harness, find another ka harness, and pay some dube to convert the harness.

Thanks
Jesse

I have that S14 SR20DET harness also a SR20DE n/a harness you can probably rewire it but honestly I think its more of a problem you're going to have to rip it all apart and start over with again top to bottom..............


buying another harness from me might be a good idea but why cant you rework the one you have in your car ?

probably a lot of troubble shooting you will have to do to figure it out or pony it up and and go to a shop that knows what they are doing but as of late seems most shops are into turning a profit and not worrying about the customer , god that is so bad , daym can't even find a place/shop to tune my own lawnmower let alone wounld even trust them as well with it. :goyou:

[ross.cottrill]

what kind of condition is the a/c compressor in?if its good ill take it and the bracket.

[racer98]

what kind of condition is the a/c compressor in?if its good ill take it and the bracket.

its in very good condtion. $40 shipped


came off the black top 180sx SR20DET motor.

i can ship out today and you will get it by tuesday.