RMJmotor
12-17-2008, 11:48 AM
Kenwood Amp, JL W1 Sub in custom box, was in my 07 Tundra under the rear drivers side.
- Kenwood: KAC 8103D mono
- JL Sub in custom box: W1 10"
Both are about 6 months old and were installed in my tundra, box is custom made to fit under rear seat of the 2007 double cab Tundra.
$200.00 for both
I will ship at buyers expense - Prices do not include shipping.
http://c4.ac-images.myspacecdn.com/images02/46/l_e1b124f557fa475f9aefa6af5ed5a077.jpg
http://c4.ac-images.myspacecdn.com/images02/63/l_07c96942b8074c2cb0e45ff07d877903.jpg
http://c3.ac-images.myspacecdn.com/images02/13/l_4f78039538f347e293dc72c591fa3422.jpg
Contact me with any questions.
From JL Info:
AMP
Rated Power Output [14.4V] - 300W x 1 at 4ohms [20-200kHz 0.5% THD]- 500W x 1 at 2ohms [100Hz 0.8% THD]General Features - Class D Amplifier Circuit- Aluminum Die Cast Heat Sink- Power MOS-FET Switching Power Supply- Built-in Variable Low-pass Filter 50-200Hz [24dB/oct]- Built-in Infrasonic Filter 15/25Hz [18dB/oct]- Bass Boost- Gold Plated Power & Speaker Terminal- Line Output Terminals [RCA] for Extension- Size [mm] : 318[W] x 64[H] x 286[D]
SUB
10" Single 4 Ohms W1v2 Series Subwoofer
Power Handling:
Peak: 600 watts
RMS: 300 watts
Injection-molded, metallic-finish polypropylene cone woofer
Rubber surround with stress-relief
Customizable trim ring
Vented reinforcement collar
Elevated frame cooling technology enhances power handling and sound quality
DMA-Optimized motor system improves dynamic motor behavior
Insert molded suspension/coil/terminal sub-assembly
Floating cone attach method
Interlocking cone and dust cap enhances mechanical integrity and cone rigidity
- Kenwood: KAC 8103D mono
- JL Sub in custom box: W1 10"
Both are about 6 months old and were installed in my tundra, box is custom made to fit under rear seat of the 2007 double cab Tundra.
$200.00 for both
I will ship at buyers expense - Prices do not include shipping.
http://c4.ac-images.myspacecdn.com/images02/46/l_e1b124f557fa475f9aefa6af5ed5a077.jpg
http://c4.ac-images.myspacecdn.com/images02/63/l_07c96942b8074c2cb0e45ff07d877903.jpg
http://c3.ac-images.myspacecdn.com/images02/13/l_4f78039538f347e293dc72c591fa3422.jpg
Contact me with any questions.
From JL Info:
AMP
Rated Power Output [14.4V] - 300W x 1 at 4ohms [20-200kHz 0.5% THD]- 500W x 1 at 2ohms [100Hz 0.8% THD]General Features - Class D Amplifier Circuit- Aluminum Die Cast Heat Sink- Power MOS-FET Switching Power Supply- Built-in Variable Low-pass Filter 50-200Hz [24dB/oct]- Built-in Infrasonic Filter 15/25Hz [18dB/oct]- Bass Boost- Gold Plated Power & Speaker Terminal- Line Output Terminals [RCA] for Extension- Size [mm] : 318[W] x 64[H] x 286[D]
SUB
10" Single 4 Ohms W1v2 Series Subwoofer
Power Handling:
Peak: 600 watts
RMS: 300 watts
Injection-molded, metallic-finish polypropylene cone woofer
Rubber surround with stress-relief
Customizable trim ring
Vented reinforcement collar
Elevated frame cooling technology enhances power handling and sound quality
DMA-Optimized motor system improves dynamic motor behavior
Insert molded suspension/coil/terminal sub-assembly
Floating cone attach method
Interlocking cone and dust cap enhances mechanical integrity and cone rigidity