s13 sr20 JUN powdercoated intake mani

[starkos14]

I have a JUN sr s13 intake mani, looking to trade for an authentic greddy. I didn't realize the JUN was for top feed injectors only and i want to run a side feed. it was 1100 shipped from japan and has the stock throttlebody plate to use the stock TB that was powdercoated too. trades or offers welcome... also, like a lot of parts from japan, this has no brand marking but i assure you that this isnt ebay crap! i might be nice enough to throw in the TB too for the right offer.


http://i125.photobucket.com/albums/p69/starko240/Photo0044-1.jpg
http://i125.photobucket.com/albums/p69/starko240/Photo0054-1.jpg
http://i125.photobucket.com/albums/p69/starko240/Photo0055-1.jpg

[vvtisupra]

any better pictures inside the manifold. I'd like to see if there are the velocity stacks

[starkos14]

it has them, i'll try and get a pic later tonight... lots to do today

[tony240]

i call bs first off jun intake manifold are $2400 and second why would you powdercoat the runners on such a nice piece if it is in fact a jun

[starkos14]

it was bought second hand and i didnt decide about the powdercoating. it was for a show car

[brndck]

so can you provide proof that this is in fact a jun manifold? or is it just jun "style"?

[starkos14]

no, I didnt get a receipt but i know my buddy's work and he def doesnt touch ebay crap. everything else i got from him was legit, brand name badged, and very expensive, but well dealed for me. he build's really ridiculous, high end show cars and i have never been let down in the past. feel free to email me to get my phone number to discuss details further. still workin on gettin the pics. my roomate borrowed my memory card and i havent gotten it back yet.

[wheruatsuk]

sorry but that doesnt look like a JUN Intake i got some pictures of mine ill post them. looks like one of those KU Intakes

[JTunedMotorsports]

sorry but that doesnt look like a JUN Intake i got some pictures of mine ill post them. looks like one of those KU Intakes
let me see pics of ures...i might be getting one for my set up..also i can get them but my cost is still prob 3k.

send pics

[wheruatsuk]

heres a pix of mine. its a real JUN Intake

http://i100.photobucket.com/albums/m25/wheruat/th_IMGP4405.jpg (http://s100.photobucket.com/albums/m25/wheruat/?action=view&current=IMGP4405.jpg)
http://i100.photobucket.com/albums/m25/wheruat/th_IMGP4406.jpg (http://s100.photobucket.com/albums/m25/wheruat/?action=view&current=IMGP4406.jpg)
http://i100.photobucket.com/albums/m25/wheruat/th_IMGP4409.jpg (http://s100.photobucket.com/albums/m25/wheruat/?action=view&current=IMGP4409.jpg)
http://i100.photobucket.com/albums/m25/wheruat/th_IMGP4407.jpg (http://s100.photobucket.com/albums/m25/wheruat/?action=view&current=IMGP4407.jpg)
http://i100.photobucket.com/albums/m25/wheruat/th_IMGP4404.jpg (http://s100.photobucket.com/albums/m25/wheruat/?action=view&current=IMGP4404.jpg)

[projectdrifter]

not to call bs but the ku have a non sr iac block on the bottom along with the 3 hold on the top.. my ku was the same exact way.
i had 2 send mine to mazworx 4 some majoy overhauling. iac block. injector bungs, q45 tb, tb brackets.

[ross.cottrill]

thre is definately a difference that you can see where the throttlebody neck is much longer on the real intake,i thinK you have a ku mani which is still nice but not the same quality.

[starkos14]

agreed, wasnt tryin to bs anyone, jun was just the brand i was told. i clearly see the differences, but the mani I have is still really immaculate and really nicely made and is guaranteed not from ebay. my roommate ran off with my memory card, ill see what i can do to get better pics and of the velocity stacks.

[starkos14]

and what fuel rail is on that jun? looks like you can run side feeds with that mani and maybe ill just keep this if i can run my blitz sidefeed 550s. also guys, 1100 shipped is not what im asking, im open to any offer or trade for another mani i can run my side feeds on.

[Brian W.]

This is what my JUN intake manifold looks like. it is in fact a real JUN plenum. You can see that the flange area is one machined piece, not a cast piece like those pictured above. ...this is part of what makes JUN intake plenums retail for $3400!!!!!!

you can see the serial # on the bottom of the flange of the #4 runner. I verified this # with JUN Japan via Email some time ago to get some history on this particular item.

http://i79.photobucket.com/albums/j123/JDMFresh/DSC_0202.jpg
http://i79.photobucket.com/albums/j123/JDMFresh/DSC_0207.jpg
http://i79.photobucket.com/albums/j123/JDMFresh/DSC_0206.jpg

[starkos14]

thats also not a s13 sr mani, so it should look different anyway.

i got in touch with my friend finally and he said it was in fact a KU mani that he had special ordered with custom vacuum ports and a stock TB plate since it was to go in a bmw, and it was a similar "jun copy," he was sorry for the confusion too. im lucky i didnt sell it and piss someone off. regardless, could a mod change my title to KU(jun style) or however they advertise it. thanks

oh ziliva how you are always a learning experience. thanks everyone to help with this diagnosis.

[nrmskate]

Thats an SR ^

That's also the S13.4 Valve cover. Expensive!

[projectdrifter]

hope this helps .

http://i91.photobucket.com/albums/k285/s145gonewide/mysr20det/000_0083.jpg
http://i91.photobucket.com/albums/k285/s145gonewide/mysr20det/000_0081.jpg
http://i91.photobucket.com/albums/k285/s145gonewide/mysr20det/000_0080.jpg
http://i91.photobucket.com/albums/k285/s145gonewide/mysr20det/000_0079.jpg

hope this helps.. this was my manifold (ka)

[Z33dori]

JUN sells for 3k

[Brian W.]

thats also not a s13 sr mani, so it should look different anyway
i got in touch with my friend finally and he said it was in fact a KU mani that he had special ordered with custom vacuum ports and a stock TB plate since it was to go in a bmw, and it was a similar "jun copy," he was sorry for the confusion too. im lucky i didnt sell it and piss someone off. regardless, could a mod change my title to KU(jun style) or however they advertise it. thanks

oh ziliva how you are always a learning experience. thanks everyone to help with this diagnosis.

i just want to let people know what they are buying.



JUN sells for 3k

also correct...

$3800 + to be exact....

JUN GT Surge Tank for Nissan SR20DET (S13) (http://www.more-japan.com/product.php?productid=17483&cat=460&page=1)

[starkos14]

thanks projectdrifter... thats pretty much looks like mine... minus the powder coating, KU or was that for a KA? just to clarify

[projectdrifter]

mine was for a sr... as well. fitment was good but they messed up my order and had to have mazworx do some work to it.

[starkos14]

more pics for everyone, glad i know what im dealing with at least

http://i125.photobucket.com/albums/p69/starko240/001-1.jpg

http://i125.photobucket.com/albums/p69/starko240/003.jpg

http://i125.photobucket.com/albums/p69/starko240/005.jpg

http://i125.photobucket.com/albums/p69/starko240/006.jpg

[starkos14]

i guess i never posted a price... how about 850 shipped for a brand new KU mani powdercoated to match the red valve covers... i really want to use this, but i could use the money for a cage

[ross.cottrill]

i think you can get a brand new one for like $500 or $600.

[starkos14]

cheapest i found online, 799 plus 90 shipping and msrp over 1000. this is still brand new and with some extra nice powdercoating. 750 shipped is more appropriate if you ask me

[starkos14]

down to 550 shipped

[starkos14]

found it for 680 shipped brand new ebay, i'm even beating ebay by $130! would like to get this sold soon. cage > intake mani