clever240sx
12-08-2008, 10:18 PM
Alright guys im not 100% sure yet but i really need cash so ill be putting a Ka back in the vert until i have enough funds for a ka-t.
Im selling a S13 Blacktop Sr20. I was having some issues with it a couple weeks ago with it miss firing but i had 770 cc injectors dumping too much fuel because i lost all my settings on my power fc and i thought it was going to need a rebuild but everything is stiill in great condition after pulling the whole motor and tranny out. I did find small ball bearing pieces in the oil pan(blown stock turbo, thats basically the only thing that it could be that uses a ball bearing). But i cleaned everything up and it runs great. I also just replaced the timing chain tensioner because the other was cracked and was leaving slack in the chain. I did a compression test and it was 155 156 156 155. So everything is still good. The motor was rebuilt about 3000 miles ago. The head has a 3 angle valve job. There are Hks 264 cams installed in the head but i will be keeping them. I will install stock cams for you.
Here is what i will have for sale:
Sr20 Block, head, T25 Turbo, stock manifold, 370cc injectors along with rail, alternator,power steering pump, 5 spd transmission, stock clutch, stock flywheel, starter, intake mani. If i missed something on the list let me know and i probably have it.
Make offer on everything, will not ship block!
YOu can pm me on here or drop me an email at [email protected] ([email protected])
Im selling a S13 Blacktop Sr20. I was having some issues with it a couple weeks ago with it miss firing but i had 770 cc injectors dumping too much fuel because i lost all my settings on my power fc and i thought it was going to need a rebuild but everything is stiill in great condition after pulling the whole motor and tranny out. I did find small ball bearing pieces in the oil pan(blown stock turbo, thats basically the only thing that it could be that uses a ball bearing). But i cleaned everything up and it runs great. I also just replaced the timing chain tensioner because the other was cracked and was leaving slack in the chain. I did a compression test and it was 155 156 156 155. So everything is still good. The motor was rebuilt about 3000 miles ago. The head has a 3 angle valve job. There are Hks 264 cams installed in the head but i will be keeping them. I will install stock cams for you.
Here is what i will have for sale:
Sr20 Block, head, T25 Turbo, stock manifold, 370cc injectors along with rail, alternator,power steering pump, 5 spd transmission, stock clutch, stock flywheel, starter, intake mani. If i missed something on the list let me know and i probably have it.
Make offer on everything, will not ship block!
YOu can pm me on here or drop me an email at [email protected] ([email protected])