Safc neo wireing info

[supratt1001]

So looking at the wireing diagrams it came with doesnt show one for the ka so how do i wire it up to the ecu??

[JVD]

Should need +12V ignition, ground, rpm signal, throttle signal(TPS), and MAF signal.

Look up a KA ecu pinout... and splice the wires into the correct spots.

[supratt1001]

wouldnt happen to know if this one is the same as my 96 ecu?? 95 ECU Pinout Guide (http://www.240sx.org/faq/articles/95_ecu_pinout.htm)