PDA

View Full Version : German zenki headlights

jspeedm
12-05-2008, 01:50 PM
i am trying to find a wiring diagram for the low beam electronic leveling control. if anyone can give me a link to that or knows where i can find the control. or even how to wire up a rig for it please let me know.
jspeedm
12-06-2008, 11:48 AM
anybody know anything on this?
jspeedm
12-08-2008, 01:35 PM
anybody?..................
projectRDM
12-08-2008, 01:57 PM
UK FSM, can be found on sxoc.com I think. I wired mine up two years go so I don't remember.
jspeedm
12-09-2008, 11:19 AM
couldn't find it. someone please send me link.
EDacIouSX
12-09-2008, 11:28 AM
interesting, if you find the wiring diagram please post it up. i'd like to check this out as well.
projectRDM
12-09-2008, 12:09 PM
IIRC, the switch has the typical illumination input to light up at night, red/blue. There's also power and ground in, then trigger out, four wires which match to the motors. The motors also have power and ground. Black being ground of course, orange/green for power.
jspeedm
12-09-2008, 01:46 PM
the motor has a 6pin connector i just need to know which wires are up/down. also, is the hight a variabl adjustmente or just high and low angles
projectRDM
12-10-2008, 09:51 AM
the motor has a 6pin connector i just need to know which wires are up/down. also, is the hight a variabl adjustmente or just high and low angles

The wires which aren't power and ground are the adjustments, there's only four left over once the motor is powered, they match the same colors as the switch. They're all blue with stripes, like blue/white, blue/black, etc. but I don't recall the 'order' of them. If you have the plugs and switch, which you should otherwise you can't do anything, you're not far off with that information.
jspeedm
12-10-2008, 10:18 AM
i was going to wire up my own switch thats why i need a diagram. unless you know where i can get the factory switch
projectRDM
12-10-2008, 10:44 AM
i was going to wire up my own switch thats why i need a diagram. unless you know where i can get the factory switch

Anywhere in the UK. Just ask. The Euro guys are usually really cool with shipping small shit. I got all the parts needed as well as a pair of heated mirrors and five Apillar grab handles with brackets for $50.
jspeedm
12-10-2008, 11:01 AM
do you have a contact?
projectRDM
12-10-2008, 12:20 PM
do you have a contact?

Nissan SX Owners Club (http://www.sxoc.com), I'm sure I posted that before. Go on, register, and make friends.