driftrkp
12-03-2008, 04:42 PM
im rebuilding my sr . i have only put about 2000 miles on this motor but oil pump went bad and spun a bearing. the motor is leaving for the machine shop monday 12-8. i am listing this now because if you would like to add (at your cost) new rod bolts, metal headgasket etc. now would be the time to do so before it is reassembled. if there is anything you want to add i can get you quotes through my work (forcedfab).
its going to be a stock rebuild with new rings, bearings, oil pump, headgasket, head bolts.
new rebuilt motor with 0 miles,
wire harness ( for a s13)
tranny,
maf,
freddy intake manifold,
550cc injectors
exedy stage 2 clutch.
cold side intercooler pipe
im looking to get 2500 out of it.
i can ship at buyers expense
its going to be a stock rebuild with new rings, bearings, oil pump, headgasket, head bolts.
new rebuilt motor with 0 miles,
wire harness ( for a s13)
tranny,
maf,
freddy intake manifold,
550cc injectors
exedy stage 2 clutch.
cold side intercooler pipe
im looking to get 2500 out of it.
i can ship at buyers expense