PDA

View Full Version : Help me identify what the problem is!!!!!


s13 s1Lv1a
12-03-2008, 02:47 PM
When i get in my car and turn on the ignition to start the car it does not want to start. I hear a click, but the engine does not turn over. If i start the wiggle the ignition switch up and down while i try to turn it on it works and my car starts. Now my problem is that this does not work either unless i tilt my wheel all the way down, then it works. If you have any ideas, plz feel free to share.

japslapsilvia
12-03-2008, 02:50 PM
just a guess maybe your ignition switch it taking a crap.....

or your keys are worn down

usajdm
12-03-2008, 03:00 PM
http://www.rockauto.com/catalog/x,ca...6,partGroup,78 (http://www.rockauto.com/catalog/x,carcode,1208966,parttype,4516,partGroup,78)
ACDELCO Part # E1460A {#88922034}

15 minutes to install...........
you'll love that you did it.

RaceBred 17
12-03-2008, 03:07 PM
Check your relay. Nobody ever checks there relays.

240cracker
12-03-2008, 03:33 PM
s14 or 13?

had that same problem in my old 14.. it was the ignition switch. heard it its more common in s14 too