t-boned s13 hatch partout

[cycloneskate]

Update! ok guys, new pricing! $40 for any body panels, and $15 for anything else!

here's what I still have;
chuki bumper and signals, epoxy primer white-sale pending
left and right fenders, epoxy primer white-sale pending
2 hoods, one epoxy primer white, one cherry metallic pearl but half sanded w/ some dings
rear hatch bumper, epoxy primer white
chuki passenger seat in gray tweed, small rip in the usual place
hatch tail lights, hairline crack- $15 for the set!
all 4 marker lights
passenger side door panel
driver and passenger power mirrors with a few scrapes
navy blue s13 center console w/ power mirrors
hatchback manual flip up moonroof w/ 5% limo tint
and lots of other stuff, if you want it ask for it! i want these parts gone so i can get this wreck outta my garage!


ok, no pics tonight, but i just went a little nuts pulling stuff out of my wreck- im selling everything but the drivetrain, so if you need something ask about it! no reasonable offers refused, unless im using it for my new coupe :) local pickup preferred, im in temecula. o yeh- the car was hit on the driver side, so it messed up everything on that side, but ive got 2 hoods, 1 primered white no dings, the other cherry pearl metallic half sanded, needs some work. i also have a set of popper headlights/motors, so let me know! lol i need to pay my parents back for helping buy my new coupe :eek3:

alright i took some pictures of stuff for people...here ya go

http://img.photobucket.com/albums/v730/cycloneskate/240sx/hatchpartout016.jpg
http://img.photobucket.com/albums/v730/cycloneskate/240sx/hatchpartout017.jpg
http://img.photobucket.com/albums/v730/cycloneskate/240sx/hatchpartout018.jpg
http://img.photobucket.com/albums/v730/cycloneskate/240sx/hatchpartout012.jpg
http://img.photobucket.com/albums/v730/cycloneskate/240sx/hatchpartout013.jpg
http://img.photobucket.com/albums/v730/cycloneskate/240sx/hatchpartout014.jpg
http://img.photobucket.com/albums/v730/cycloneskate/240sx/hatchpartout015.jpg
http://img.photobucket.com/albums/v730/cycloneskate/240sx/hatchpartout001.jpg
http://img.photobucket.com/albums/v730/cycloneskate/240sx/hatchpartout002.jpg
http://img.photobucket.com/albums/v730/cycloneskate/240sx/hatchpartout003.jpg
http://img.photobucket.com/albums/v730/cycloneskate/240sx/hatchpartout004.jpg
http://img.photobucket.com/albums/v730/cycloneskate/240sx/hatchpartout005.jpg
http://img.photobucket.com/albums/v730/cycloneskate/240sx/hatchpartout006.jpg

[itz_jOw3]

Do you have these parts still in tact and available?

-Drivers side rear side marker
-Front passenger side orange marker

[WhiteTE72GT]

PM'd you bro need some parts

[bejota180sx]

i need the lever metal thingy that opens the fuel door... the one that goes inside the quarter panel...
how much for that thing?

[dorkjoey240]

hey u got power steering lines and resevoir?

[payne219]

Are the fenders still in good shape? Dibs on both front fenders if you have them...

[cycloneskate]

marker lights, headlights and tails all in tact. the fuel door popper still works, it has some overspray on it tho- make an offer. i need the power steering stuff cuz im putting my dohc motor from the wreck in my new sohc coupe, sorry about that. the fenders are unbent and already epoxy primered white. so like i said, no reasonable offers refused, but dont lowball me either guys alright?

[mobilesuit818]

Is your bumper still one piece?

[cycloneskate]

front bumper or back? i have them both

[mobilesuit818]

I need the front bumper complete.

Can you pm your celly..ill call you right now...

[VanduzerLancerES]

front right lower controll arm?

[cycloneskate]

control arm is still there and undamaged, but w/o wheels how am i gonna move the dumb thing around? i may be able to work sumthin out if you wanna come help take it off though

[deadghost]

if its hicas, let me know if I can get the steering lines, and by any chance is it boosted.

[payne219]

Where are u located? will you take $80 for both fenders?

[pink godzila]

Does the hatch trunk has hole, wing, and wipe?

LMK!!

[cycloneskate]

im in temecula, $80 sounds good to me, the fenders are primer white, not in perfect condition, but you couldnt tell they werent straight until i speckle coated them. they should bolt up fine though. the hatch had a spoiler, but i took it off and filled in the holes, and i have the wiper assembly for it too.

[pink godzila]

Where is temecula... anyways do you have picture of the hatch. LMK!!

[cycloneskate]

area code 951, zip code 92591- im an hour south of LA, an hour north of SD, and 45 mins from Oceanside

[emayearecee]

can you check to see if you hatch still opens the way it should... if so I would like to get my hands on the trunk release assembly and if the other person flakes on the fuel release assembly... ill take that too... willing to ship?

please PM

[keistyle]

master+salve cylinder, and clutch pedal+assembly?
price?
thanks

[cycloneskate]

sorry it's an automatic, so i dont have those parts- as for prices on everything, you decide! shoot me something reasonable, nothing too ridiculously low, and ill probably take it!

[keistyle]

god dammit,
glws

[payne219]

pm sent about the fenders

[wh1tecoop]

Is your bumper still one piece?

If he^^^flakes! How much for your front bumper complete? And also white hood

[cycloneskate]

pm's replied to- come on guys anyone need interior stuff?

[k0uki]

driver and pass window switches shipped to 95121

[cycloneskate]

http://img.photobucket.com/albums/v730/cycloneskate/240sx/hatchpartout.jpg
not in the best shape but still functional- $20 shipped

pm's replied to

[cycloneskate]

bumpity bump- ive got tail lights too, and power mirrors, and i have a flip up manual moonroof.

[bornslippy73]

Any additional pictures of the area of impact?

I need the front knuckles and front lower control arms.

Also, both motors for the pop-up lids. Just the motors and all the connections and wires not the lids or lights. They do work right?

I'll pay for shipping. PayPal with 3% fee.

Ship to 94545-1372

PM me. Thanks

[S14Cuhh]

how much for rear bumper and hardware?

[VanduzerLancerES]

Alright what i need is all for the front right
I need both lower control arms, inner and outer tie rod ends and a sway bar end link.
Do you have that stuff? PM me back please.

[krzy]

Do you have a stock exhaust? If so, I am interested. Thanks in advance.

[KPNITRL]

I sent you a pm sent!

Glws

[cycloneskate]

hey guys- all pm's replied to, ive got new pricing, $40 for body panels and $15 for anything else, shipping is extra of course. as for the stock exhaust- I'm using that for my e to de swap, sorry, and as far as the suspension pieces go, i dont have a forklift or anything, so if the car can't roll, it's stuck @ my house!

[luckvx]

how much for the power mirrors, and the radio trim, and the cluster

[BlackOPS]

Would you be willing to cut the roof off?????

[Mr.James]

^^^ i thought my post was gona be an odd one... anyway, any chance you would be willing to pull the whole harness thaat runs in the engine bay with the fuse boxes?

[cycloneskate]

pm's replied to. hey man- the roof got bent in the accident, so that's probably not what you want, and as far as the engine harness goes, it's almost out, so ill let you know after i finish the motor swap if i need it ok?

[cycloneskate]

now BUMP IT! good prices!

[JaySauce]

Down to part out all locks, ignition key assembly, and original key? If so pm me the price shipped to 93041

[wh1tecoop]

So how much for the front bumper and the white hood together?

[afro88]

You willing to part out the engine harness? I need it all intact including the ECU plug. I need it BAD!

[Mr.James]

pm's replied to. hey man- the roof got bent in the accident, so that's probably not what you want, and as far as the engine harness goes, it's almost out, so ill let you know after i finish the motor swap if i need it ok?
sounds good. just got a previously swapped hatch with some wiring issues...the whole chassis harness was relocated....dont ask...thanks BTW its the CHASSIS harness i need, not the engine one...LMK

[jonasblack]

DO you still have the passenger side mirror and the two rear side marker harnesses? If so how much for all three?

[sil80dreamer]

I need the wiring and plugs for the blinkers and the side markers for both sides, as well as the grey trim piece that goes around the headlight for the passenger side shipped to 53051. LMK.

[cycloneskate]

hey sorry guys i havn't been on today- ive spent all day working on the motor swap, and then i went to work, so ill reply to everything tomorrow morning alright?

[mr.lonelys12]

driver side and passenger side steering tie rods, inner and outer please.

shipping to 95828? PM me

[emayearecee]

yo man... we were pm-ing about the trunk release assembly and you stopped pm-ing... i still need it lmk wats up.... PM would be most convenient

[napaKAliboog]

I need the rear control arms and tie rods. I also need the front tension rods. I'll give you 30$ for those. What kinda shocks or springs were on it? and can you take a picture of the hood?

[sp3ckz]

do you still have both turn signals??
PM me please

[sileighty83]

Pm'd u bout the part out

[s09014]

HI, you still have the head light??? thanks

[Ethan Hunt]

I would be interested in the carpet if its in good condition. Please email me at [email protected]

Thanks!

[cycloneskate]

hey everyone, sorry I havn't been on lately, but I've been waaay busy working on the parts swap to my new car. not sure if you guys still want stuff, but if so, I'd prefer local pickup. If I ship anything, shipping will be actual shipping, no handling extra. prices are still the same $40 for exterior body panels like bumpers or hood, and $15 for other stuff. Here is the main stuff I have available- both power rearview mirrors, rear hatch, front and rear chuki hatch bumpers, marker lights, chuki turn signals, blue center console, miscellaneous interior pieces, full sohc exhaust, sohc motor w/ 230xxx miles connected to blown auto tranny, needs a wiring harness, passenger side hatch window glass, hatch tail lights and lots of other stuff. I'll try to be on here more often to check pm's and reply to stuff, so hit me up!

[S13cl9kid]

do u have any suspention parts

[cycloneskate]

what do you need? the car is a semi-rolling chassis now, the driver side rear suspension stuff is all messed up from the accident

[cycloneskate]

bumpity bump- this stuff is cheap guys! come get it out of my garage, i need room to work!

[breaker103]

is the rad core support fine? if it is i would like to hack it off if you will let me i can pick it up maybe this weekend let me know at 7148517935 i am up anytime

[racerx2k1]

pm's replied to- come on guys anyone need interior stuff?

bumpity bump- ive got tail lights too, and power mirrors, and i have a flip up manual moonroof.

hey guys- all pm's replied to, ive got new pricing, $40 for body panels and $15 for anything else, shipping is extra of course. as for the stock exhaust- I'm using that for my e to de swap, sorry, and as far as the suspension pieces go, i dont have a forklift or anything, so if the car can't roll, it's stuck @ my house!

now BUMP IT! good prices!

bumpity bump- this stuff is cheap guys! come get it out of my garage, i need room to work!

2 bump limit. You can start new thread in 3 days.