View Full Version : i cant find the firewall hole
gh6o6
11-18-2001, 11:04 AM
well i found it but i cant get through the rubber seal. how has everyone done this any info will be good
thanks
transient
11-18-2001, 11:50 AM
Personally, i ended up having to drill through the firewall. It's a bit of a pain, but it works. Make sure you have the right size drillbit and a grommet to put in there though... that's where I ran into a problem. I didn't have the right size bit, so the grommet didn't fit. I've still got to fix it somehow.
gh6o6
11-18-2001, 01:19 PM
whered you drill the hole?
transient
11-18-2001, 11:36 PM
Well, on the S13, there's what looks like some sort of drainage thing on the passenger side. I went a little below that and drilled the hole. I doubt your car will be the same though... Basically just try to find a place that's out of the way and away from engine heat.
IceTekGuy
11-19-2001, 09:20 AM
You found the hole, but didnt know what to do with it, tsk tsk tsk...
personal problems should stay personal...
<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>
drifterx
11-19-2001, 10:49 AM
try to find the holes from your engine bay
it is easier
Its ez to see in the engine bay, just look where your passenger side is and you should see a black rubber peice that will allow for wires to be droped through. I ran my fogs through there a long time ago. You can get to it also by the passenger seat where your feet go you should be able to see if you pull back the carpet. Stick a screw driver threw and you will be able to see where it is in the engine bay.
gh6o6
11-19-2001, 04:23 PM
i tried the dam things sealed tighter than a ... well nevermind
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.