PDA

View Full Version : CA 240sx Parts (NEW and USED, some stock some not!)


silsx13
11-12-2008, 03:41 PM
(Listed on craigs as well...)

Have a bunch of 240sx/S13 parts up for sale, here's the list:

- Used Exedy Stage 1 Clutch w/pressure plate for KA (has about 35-40% material left) $130
- Used Rear Hawk HPS Street Brake Pads for S13 (have a LOT of material left on them)$65
- Used Rear Centric brake rotors for S13 (these too have a LOT of material left on them) $45
- NEW Blitz SBC Boost Controller (been trying to sell but no takers so far) $525
- NEW Dixcel Rear brake pads for S13 $85
- NEW nissan OEM Z32 Fuel Filter (will fit KA24E/DE)$15
- Stock KA24DE Top part of header for S13 $15
- Stock KA24DE Cams (Intake & Exhaust) $30 each/$55 set
- Stock KA24DE Cam Gears $20
- KA24DE Automatic Transmission (90k, low miles)$100
- KA24E Power Steering pump w/resevoir, resevoir hoses, brackets, pulleys $80
- 1 used stock motor mount for KA $30
- 1 used stock tranny mount for KA $20
- Stock KA24DE Intake piping $15

- Used no-name brand Voltage Stabilizer (China made most probably but still works)$Pending Sale

- Used Whiteline Front & Rear Swaybar Endlinks (polyurethane type, better than stock, comes with all mounting hardware) $20 for front or rear/$40 both

- Used stock Clear Corner markers w/bulbs (the lights that go on the sides of the front bumper BUT they're not colored orange) SOLD!

- S13 black dash (has a few cracks on it but otherwise in decent shape)$20

- 1 Driver's side front fender (Black color, has some dings/scratches but otherwise in ok shape) $20

I have lots of other parts to list but don't have time- will try to list them as I find em'. Pics available upon request.

All prices listed above are a lil negotiable and if you'd like to buy any of the parts above or are looking for a part not listed, PM or email me at "[email protected]" and I'll get back to ya. Located around the SoCal area, can do pickup or shipping thanks.

silsx13
11-12-2008, 10:12 PM
Night Bump.

Anyone want any of these parts???

xKennie
11-12-2008, 10:26 PM
where are you located and can i see pics of the clear lights?

Ratchet
11-12-2008, 10:34 PM
do you have a TPS for a KA dual cam?

iMAGE976
11-13-2008, 01:15 AM
where in socal is this stuff located?

silsx13
11-13-2008, 10:18 AM
Thanks for the interest guys.

Sorry, don't have a TPS sensor for a KA dual BUT, have one for KA single...

I'm located around the West Covina area and can meet up anywhere around the SoCal area.

silsx13
11-13-2008, 10:58 AM
Pics of the clear corner lights:
14781

silsx13
11-14-2008, 10:17 AM
Last Bump. Anyone else interested?

No offer will be turned down unless it's unreasonable....

swayray
11-15-2008, 10:56 AM
i would like to see some pics of those endlinks...

Kougeki
11-15-2008, 12:30 PM
Pics of the stock headers?

silsx13
11-15-2008, 01:05 PM
Pic of the swaybar endlinks for swayray:
14779


The endlinks use the stock nuts and bolts and are easy to install, can be used with stock swaybars and will improve handling and feel.

Dman II-40
11-16-2008, 05:15 AM
bump, good stuff here

tre4s13
11-16-2008, 05:21 AM
pics of voltage stbilizer and shipping to 27103 quote?

silsx13
11-17-2008, 11:02 AM
Pics of Stock Headers as requested (sorry I lagged):
14780

jspeedm
11-17-2008, 11:22 AM
if you come to the 562 meet http://zilvia.net/f/south-western-states/221350-lb-town-center-thursday.html, i'll take the voltage stabilizer and i'll buy you a double double.

brokeAs240sx
11-17-2008, 12:39 PM
John, I can't see your attachments (says "Invalid bla bla bla").

silsx13
11-17-2008, 12:56 PM
Pics put back up- accidentally deleted them.

Thanks for letting me know QV!

Double-Double for the VS? I dunno........

jspeedm
11-17-2008, 12:59 PM
i said AND a dd

silsx13
11-17-2008, 07:18 PM
Sorry about that jspeedm! Was kinda in a rush to reply to everyone's interest while at work....

Will try to show up then, thanks for the invite.

kouki crisp
11-20-2008, 12:39 PM
pm'd you about the power steering. no response.

silsx13
11-20-2008, 07:09 PM
All PMs replied to.

Sorry for the late response guys, been busy at work.

silsx13
11-21-2008, 03:59 PM
Clear corner lights, header downpipe, and Intake box sold.

Anyone I havent replied to yet?

wickedjester
11-21-2008, 05:52 PM
do u have this piece?

http://i59.photobucket.com/albums/g301/jeste12/exhaust.png

silsx13
11-24-2008, 05:33 PM
do u have this piece?

http://i59.photobucket.com/albums/g301/jeste12/exhaust.png

Sorry for the late reply- I already sold that piece along with the stock 240sx exhaust, sorry.

Thanks for your interest- need any other parts?

vincent_18
11-24-2008, 07:51 PM
do you have any bell housing bolts that go to the manual transmission, an egr, spark plug wires, and an alternator??? PM me. Thanks.

jspeedm
11-25-2008, 12:21 AM
do you still have the vs?

BoostGetsULaid
11-25-2008, 12:44 AM
willing to do $45 shipped to 98682 for the whiteline sway end links?

silsx13
11-25-2008, 01:49 PM
All questions and PMs replied to.

Some good stuff still up for sale.

heavenboundkevin
11-25-2008, 03:09 PM
ever drive down to san diego? If so ill meet you up and take the drivers side fender if you got it.

racerx2k1
11-25-2008, 03:39 PM
Night Bump.

Anyone want any of these parts???

Last Bump. Anyone else interested?

No offer will be turned down unless it's unreasonable....

All PMs replied to.

Sorry for the late response guys, been busy at work.

Clear corner lights, header downpipe, and Intake box sold.

Anyone I havent replied to yet?

All questions and PMs replied to.

Some good stuff still up for sale.

2 bump limit. You can start new thread in 2 days.