PDA

View Full Version : 1994 Mazda Rx7 single Turbo Low mileage!


otterball21
11-12-2008, 03:16 PM
This is a Low mileage RX-7.
I love this car and I want this to go to a nice home.
I'm slightly flexible with price.($25,000) I'm really looking for cash.
I'm selling due to financial crunch so throw me an offer, I'm open to offers. Close is good, no low ballers. I'm open to trades also.

ok, Mileage on the vehicle is 50100 right now.
This is switched to a single turbo using the Apexi Isamu Rx6 Turbo Kit. Anyone that knows this turbo kit knows the value of this turbo. It is simply amazing. It also has a full Standalone Engine management system from Apexi, the Power FC. This is fully tuned and it makes the car run amazing!


Exterior:
Sarona Front Bumper(rare)
Rolled fenders all around
Flush mount Headlights, no flipups
8000k HIDs
Rolled Rear Fenders/Flared
Molded Rear Bumper
Paint is a Cobra SVT blue 2002
House of Kolor Intercoat carrying a blue Flake
Mirrors are Black with a gold/green flake

Interior:
Bride Suede Red seats
4 point harnesses with Camlock
NRG Quick release 2.0
NRG Short hub
NRG Steering wheel
Black Carpet
Greddy Shift Knob
Boost Gauge
AEM Wideband Gauge
Water Temp Gauge
Oil Pressure Gauge
Fuel Pressure Gauge

Engine:
Apexi Isamu Rx6 Kit ($5000.00)
17psi Capable
Apexi 44mm Race Wastegate
Apexi Downpipe/manifold
Apexi Noir Exhaust (Quiet at idle and the wastegate is an open dump)
Apexi Power FC (standalone engine management system)
Apexi Power FC Commander
Apexi AVC-R (Boost controller)
3 inch Intercooler piping/ 4 inch thick intercooler
CryO2 system for Drag and hot summer days
Battery relocation/Optima Yellow top
FF Dynamics Aluminum Racing Radiator 2 new Slimline fans
Metal AST Tank
3 bar Map sensor
850cc injectors in primaries and secondaries
Modified primary rail
Rats nest Deleted
Silicone vac hoses all around
RFL BOV knock off
Reinforced Silicone couplers all around
Greddy Turbo Timer
Air Smog Pump delete
Over drive Water pump pulley
Alternator underdrive pulley
ACT Street Strip Clutch/Heavy Duty pressure plate

Wheels:
ASA Staggered 19 inch wheels
19x8.5 front wheels
19x9.5 rear wheels
Nitto 555 245/35/19's all around

Suspension:
Tein S Tech springs ( not installed in pictures)

Braking:
Slotted and drilled rotors all around

Audio Equipment:
Memphis Audio sponsored vehicle for awhile
Memphis Reference 5.25 components in the front
Memphis Reference 5x7 coaxials in the rear
Memphis M3 12 inch subwoofer
Memphis Mini-belle 5 channel amplifier
Memphis Amp wiring/RCA's
Pioneer Flipout screen/ plays DVD's and ipod capable connection http://www.mautofied.com/AdPhotos/10085611_200811623456.JPG
http://www.mautofied.com/AdPhotos/10085611_200811623559.JPG
http://www.mautofied.com/AdPhotos/10085611_200811623657.JPG
http://www.mautofied.com/AdPhotos/10085611_2008116232223.JPG
http://www.mautofied.com/AdPhotos/10085611_20081162382.JPG

http://www.mautofied.com/AdPhotos/10085611_2008116231345.JPG

http://www.mautofied.com/AdPhotos/10085611_2008116231613.JPG

MikeisNissan
11-12-2008, 08:04 PM
damn 25 gs!??

jskateborders
11-12-2008, 11:51 PM
Sexy car, maybe lower a little, but sexy nonetheless

otterball21
11-12-2008, 11:59 PM
Yeah it's OBO,

I am lowering it tomorrow.

It's been tuned on a dyno. It puts down 350 at the rear wheels on 19's at 13 psi.

You can easily put the car over 400hp rear wheels with 1300 cc secondaries, and an Twin Power ignition system.

Except I have run out of money! lol.

The total cost to put it over 400 hp would be a extra $560 in parts and a new tune. Which I don't have. The closest tuner I have is 6 hours away and I have to tow out and tow back the same day. So It's time for me to give it to a person that is going to treat it even better!

qt_240
11-13-2008, 01:39 AM
where are you located at?

otterball21
11-13-2008, 11:03 AM
I'm located in Central PA.

jskateborders
11-13-2008, 11:21 AM
Yeah it's OBO,

I am lowering it tomorrow.

It's been tuned on a dyno. It puts down 350 at the rear wheels on 19's at 13 psi.

You can easily put the car over 400hp rear wheels with 1300 cc secondaries, and an Twin Power ignition system.

Except I have run out of money! lol.

The total cost to put it over 400 hp would be a extra $560 in parts and a new tune. Which I don't have. The closest tuner I have is 6 hours away and I have to tow out and tow back the same day. So It's time for me to give it to a person that is going to treat it even better!
Haha, I meant lower the car, not the price

otterball21
11-13-2008, 11:45 AM
lol that's what I meant. I'm lowering the car today... I'm still waiting for the UPS man..

Bad40r7
11-13-2008, 01:13 PM
Ha you will never get 25k for the car. The engine bay looks hilarious to say the least...i dont see a single part that doesnt look black and i count 5 couplers in the pictures already, not to mention the 2 down by the intercooler, and probably one more in the passenger route. Shotty work. Also, the rx6 is very hard to make 400hp on, as it was designed to be a drift turbo giving power right when hitting the gas. Its not meant for top end power, same reason it will start to die at high RPMs when you raise the boost. Got a dyno sheet to prove 350hp at 13psi? Post it up.

Im sorry man, but in this day, especially with an FD, you need something top notch and close to perfect in very aspect to fetch 25k. And yes, before you tell me i dont know what im talking about and probably never owned an FD, i did own one.

Good luck.

otterball21
11-13-2008, 08:42 PM
Ok, First off. Thanks for your input?

If you were here to poke at it, why?

The intercooler piping has 7 couplers total. Just like the greddy system.

The rx6 is capable of making 400wrhp. Now to say that it is designed to make more than that? No, definitely not. The turbo is max to design to push 17 psi.

Secondly, the car was tuned by Jason by RX7Store.net. If you owned a FD you should know who they are.
They rushed to leave and I don't have the dyno sheet with me, but I'm sure sometime they will post it up on their website.

The Rx6 turbo gives a good medium power band. If your looking for high horse power? That would not be the turbo to have. It has almost a similar response like the stock twins, if you don't like the single you can switch to BNR Turbos.

I never bashed on you, and I never called you out on you not owning a rx7 or could never afford one. You just felt the need to write negative remarks on it?
I kept the engine bay black due to the fact that it's probably the only area that will get dirtiest the most. I drive my cars, not park it in a garage 24/7. I also said the price is abo. I'm looking for someone in a range, and work with them.

Thanks
Jack

Bad40r7
11-14-2008, 11:32 AM
i was by no means saying that your car wasnt nice...its not near 25k nice though.

Your intercooler has 8 couplers, and my greddy system had 6. The hotside piping just looks shotty, thats the point i was making.

Of course i know who rx7store is. So your saying that jason tuned your car...and then rushed out of there with no time to give you a dyno sheet? Ahh sounds like the excellent customer service you can expect from rx7store.

I wasnt bashing in your car, i was simply pulling info out that is extremely far fetched. What happens these days, as im sure you know, is FD fan boys get ahold of these cars, then sell them and blow up there listing with "OMG MY STOCK TWINS MADE 400 hp AND I RAN 10's all day long!!!!" then the buyer sees that, buys the car, and i, an FD enthusiest, hear about it from people who say "aww rx7s are shit, my buddy bought a 10 second one and could only runs 12s!" thus they get a bad name.

For a realistic price go off this...95 SSM r2(yes, 1 of 22 i think) pfsupercars motor, aspec gt35r, top notch stuff. BBS wheels, 99 spec front, 27k ORIGINAL miles...asking 24k. Now take an honest look and tell me how your car is worth anywhere close to that. If you get an offer for anywhere around 17k id JUMP on it fast.

otterball21
11-15-2008, 01:05 AM
I definitely am not saying this thing is going to run 10's. It definitely puts down the HP though. To be honest? 350hp at the rear wheels is like nothing on a rx7. Every Rx-7 enthusiast goes all out and build like 400+ hp cars. I didn't go that route. I've talked more than enough times with Keith Imoto at Apexi USA about this turbo kit. At 13 psi, it's definitely doable. I am for 1 not to run the car at 17 psi. But it's definitely doable. I daily drive it. I'm not looking to race this thing down the track.

I had an offer of 26k(no lie.. I'm kinda a fool for not going for it, but I'm too good hearted), but the kid knew nothing about cars. I turned it down. I'm not going to sell it to a kid that has not a clue about anything mechanical. Mommy and daddy bought him a SRT-8 jeep and he watches all of us drifting, so he was all excited blah blah.

Someone is trying to trade me a MKIV supra, however it's an auto, so I denied that.

I'm posting the value high and letting people work their way down. It's an abo price. I know I'm not going to get that price


I got up 4 am in the morning, Towed my car out to Columbus, OH to meet Jason and Xavier at 10 am. They were really nice. I brought a haltech system, and it wasn't just like the power FC, so I bought a power FC from them. They tuned the car till 6 pm when they closed up shop and they wanted to leave, and my car was still on their dyno. So Jason left and Xavier was the one to close up shop. I really like them. I never got a printed out dyno sheet. They have good customer service, they hooked me up like non other and also my two friends I brought along got two amazing full sparco seats for 1/10th of the price they retail.


I've seen rx-7's like that. But there are prices left and right. I'm just finding a middle range. My buddy and I just got rid of his LS2 Rx7. That sold for 46k. Stock interior, stock wheels, Reinforced rear subframe.
Full Swap, only thing not functional was the ABS system.
I went to the DMV in Central PA, their value for my car was 22,000 in their little book when I titled it.

ship2236
11-15-2008, 03:48 AM
fuck it man its wasted energy on the thread...glws...i doubt ull hit that price but im sure u will come close...its a clean fd and im sure someone will love to buy it..other than that lets not bang on peoples threads man... just appreciate the car beinf sold...if u dont think its worth his asking price than go to another page..everyones diff....its all buyer preference...again glws bro

otterball21
11-15-2008, 08:50 AM
thanks ship Greatly appreciated!
:)

S13shaka
11-15-2008, 12:55 PM
all that money dropped and your rolling on ASA's, haha