KInd of Retarded but necessary (Sway Bar End Link trouble)

[CursedGTR]

I have some of the JIC Stabilizer Adjuster End Links as picture below. My trouble is the fact that I got them really really cheap because there were no instructions. Figuring it would be pretty straight forward, I went for it.

These things are a pain in the ass and there are no instructions anywhere to be found. Has anyone installed these before? All of the combinations I have tried result in binding or improper angles.

If you have experience with theser links plese post up.

http://i35.photobucket.com/albums/d199/CursedGTR/DSCF5826.jpg

[street_white180sx]

Which chassis is this goin on. And are these front sway bar links. And also take a pic of the old link setup. Never installed these before but i am an auto tech i am quite sure we cud figure it out together. But i will need a pic.

[Ali 556]

one side bolts to the SB
Other Side Bolt To The Control Arm...

Easy...no? :eek3d:

[racepar1]

Those look like they are for the rear. The side with three adjustment holes bolts to the swaybar. The swaybar is sandwiched between the two pieces of metal I think. The other end without the adjustment holes bolts to the control arm.

[CursedGTR]

Those look like they are for the rear. The side with three adjustment holes bolts to the swaybar. The swaybar is sandwiched between the two pieces of metal I think. The other end without the adjustment holes bolts to the control arm.

YOu got that right. We got that done, but the problem comes in when everything gets mounted up the links are twisted. I am beginning to believe that they are not compatible with the NAMS Lower Control Arms.

TO Answer other questions.

They are rear

They are going on an S15

I will post up some more pictures later on as I have to go to the shop and take some.

Thanks
Brian