Quick Aeromotive FPR question

[rocksteady_racer]

When you install the gauge and the lines what do you use on the threads so they don't leak? Do you use blue thread locker or something? Thanks in advance.

[garagelu]

If you are using AN fittings, you shouldnt need anything. The fitting seals itself.

[imotion s14]

I used an port fitting with the O-rings and used liquid teflon on the gauge port. I don't see how the fittings would seal itself because the ports on the FPR isn't flared. I might be wrong on that.

[bejota180sx]

use teflon on the gauge, its dumb idea but is stops the leaks, put it on the threads dont let any get on the top... ive had it on my fuel gauge for years no problems... if its AN fitting dont use ANYTHING... theyre supposed to seal themselves