clutch kit for frontier? (with ka24de)

[brndck]

this might sound noob-ish, but i just need confirmation.
is there any difference between clutch kits for s-chassis kade and frontier kade?
my brothers tob is making noises so its time for an upgrade.
(2000 frontier with ka24de, fyi)
and if any of you tell me to search, i will mail you a bag of feces.

[derek_s13]

i'd say checking to see if the part numbers match at autozone/advance would be the quickest and most accurate way to check.


the alternator died in my 98 frontier, and i wanted to just use one off one my old KA's, but the part numbers for all 240 alts. and the frontier alt were not the same. i just went to autozone daterbasssee

[Massimo Power]

Clutches are Different due to the difference in Tranny and flywheel setup.

In stock if needed.. :)

$99 for Exedy OE


:)

[lazysk8er2]

i thought the trannys were the same isnt it a 71c? the bellhousing def has to be the same atleast

[Ali 556]

www.ka-t.org (http://www.ka-t.org)

[EchaKqulo]

The clutches/flywheel are different. The frontier ka24de flywheel is bigger than the S-chassis kA, the clutch is 240 mm and the S-chassis is 225 mm. The pressure plate bolt pattern is different too. The Frontier pick-up is the same as the non-US D21 pick-up so the Frontier flywheel is the famous D21 pick-up flywheel for the White Bunny Special. I once had to replace my S-chassis OEM cluth and in the autopart store they gave me a Frontier KA clutch, that is how I found out.

[Ali 556]

The clutches/flywheel are different. The frontier ka24de flywheel is bigger than the S-chassis kA, the clutch is 240 mm and the S-chassis is 225 mm. The pressure plate bolt pattern is different too. The Frontier pick-up is the same as the non-US D21 pick-up so the Frontier flywheel is the famous D21 pick-up flywheel for the White Bunny Special. I once had to replace my S-chassis OEM cluth and in the autopart store they gave me a Frontier KA clutch, that is how I found out.

100% true

OP You can install NON TURBO 300Zx Clutch....Direct bolt on...and will grip better,

search some dude already done it...

Ali

[bardabe]

100% true

OP You can install NON TURBO 300Zx Clutch....Direct bolt on...and will grip better,

search some dude already done it...

Ali

thats what i had in my old 02 frontier. Exedy OEM Z32 N/A Clutch