Parting out S13

[clippard]

90 black 240sx SE

parting it out completely, will seperate parts. no passenger side fender, no front bumper cover, or hood. Located in north west indiana near Chicago. Joe

email me if interested [email protected]

[91CRXsiR]

does your S13 have cruise control?

[the head]

is it a SOHC or DOHC and what kind of condition are the struts in?

[DuffMan]

What kind of condition is the hatch in, did it have a spoiler?

[clippard]

has cruise control, rear hatch is in okay shape with spoiler, and struts are in excellent condition.

[91CRXsiR]

i need a bracket and a nut that pulls the cruise cable w/ the gas cable lettme know if you know what im talking about ..

[powerbraker13]

How much for just the engine? And would you ship?

[s13driver]

do you happen to have the washer nozzle for the rear window ? if you do how much does it cost to have it shipped to nyc ?

[clippard]

Sorry, the motor pulled from the car was a SR20DET, and thats not for sale (special plans in the making). The rear washer fluid shooter is yours free, if shipping is cheaper than 4 bucks. send me your address via e-mail [email protected]


Have a Auto trans for sale, 140 bucks OBO

[clippard]

I know what your talking about 91CRXsiR, but I'll have to check to see if I have that, my existing SR might be using it, if i do have it i'll send it to you for free if shipping is cheap enough. I'll get back to you soon.


Have a S14 T28 for sale, give me a offer.

[Sil1580]

do you still have the dash and what color is your interior? and what is its condition?

[DoriftoSlut]

I need rear ball joints! If you don't want to hassle with taking them off the arm (not hard) I will take the rear lower control arm with it, as long as the ball joint is there. Also, the plastic wiper "transmission" it is called that is for the front center wiper blade (unde the cowl). Hint: Welding a patch onto the firewall will most likely melt the plastic when a spark of burning metal lands in there and ignites it! Eeeek!. Oh, also the little clips off of the firewall that hold on the harlines... AAaaaannnd... if was DOHC i will take the cluster from you. Hehe thanks!.

[the head]

i need PS lines shoot me an E-mail with a price

[91CRXsiR]

cool let me know.. my lazy right foot needs it badly..

[DuffMan]

I'm interested in a passanger side door. I'm local, so I could pick it up. Let me know.

[Rick-95ZE]

Originally posted by clippard
90 black 240sx SE

parting it out completely, will seperate parts. no passenger side fender, no front bumper cover, or hood. Located in north west indiana near Chicago. Joe

email me if interested [email protected]
I'll give you $75 shipped for your driver side fender, as long as its in good shape;) I live in cincinnati OH so it wont be that costly to ship.. I can pay pal , so let me know

[Rick-95ZE]

I'm also interested in the driverside DOOR let me know, PM me:D

[nissanspeed002]

If it wasnt wrecked or hit in the front hard i'd need the front end(not the fenders bumper etc.) with the upper and lower rad/core support and any metal brackets welded to it. mine was hit pretty hard. Basically need the front sawzalled off. If you need pics i can show you what i mean and where it'd need to need to be cut. Thanks.

[spec-d]

Do you have the driver side headlight
assembly?

[pr240sx]

whatever the year, passenger side support bracket

[THX1138]

If it had power accessories, I need the driver's window relay/amplifier/black box thingy, and the antenna (I only need the mast, but I'll take the whole assembly if it's easier for you).

Shipped to Seneca, SC 29678.

[monkiboy]

i need the gauge cluster with the two foot harness if it's hud. doing a swap from the analog. how much if you got it.

[legendarysnail]

Is the Catalytic converter in good shaoe? How many miles are on it? Email me with price and info at [email protected]