90 and 95 KA parts

[Nismo241]

I have a one KA sitting in my garage and one in my car that will be coming out soon. I have the top half of both of these motors.

For the 95 KA I have:
Complete head with cams
Intake manifold plus all EGR
Exhaust manifold
Alternator
starter
Fuel rail with injectors
and flywheel No Sensors harness or ECU.

for the 90 KA all parts won't be able to come out until I get my clip. Bt it has a knocking rod. I just plan on parting out the top half and tranny. The problem is I need a couple of hundred more $$$$ for the clip. If you want parts off of the SOHC you can either wait until it comes out, or you can pay now and recieve later(which I don't expect anyone will do). But in all honesty I guarentee the delivery. You can PM me or AIM me @ NismoButtnutz or E-mail me at [email protected]

[Nismo241]

I forgot, I laso have the starter as well, whatever you need just ask I may have forgot stuff. I'll post pics of everything maybe tomorrow, I need to clean the garage anyway.

[90240ka]

Hello I was wondering if you still had the 90 ka motor, and if you do, do you have the fuel injectors, mine are squirting everywhere,if you do have them still, what kind of shape are the in and how much do you want for them, I will pay for all shipping.

[Nismo241]

the injectors are just fine, I'm asking 100 shipped for them, from nissan last I checked they are 128 a peice, let me know.

[90240ka]

and the injectors are for the 90' ka motor, correct???

[Nismo241]

that is correct. I ordered my RB20 clip and it's "supposed to be here next monday or tuesday". So I will take them out then, I don't want to tear my car down before I get it, I want as little downtime as possible.

[Nismo241]

here are some pics of the stuff for sale

[Nismo241]

another group

[Nismo241]

and the biggest group

[DarkRaptor42]

do you have the power steering pump for the 95?

[Nismo241]

yes I do.

[90240ka]

hey whats up, I am ready to purchase those injectors, if you are ready, I will need you address and stuff like that.

Can I have your e-mail address so we can exchange info, mine is
[email protected]

[DarkRaptor42]

how much for the PS pump, catch tank and lines from the 95?

[Nismo241]

I only have the pump and mounting brackett. How about 75+shipping for the pump and brackett and pulley.

[Nismo241]

I also have a 5 speed tranny for the SOHC with clutch flywheel and ECU if you need that. The factory nissan clutch has about 20,000 miles on it with no slippage at all, the flywheel was resurfaced when I put th emotor in my car, and the tranny was fed redline tranny fluid for those 20,000 miles. I'm asking 200+shipping for all of these parts.

[DarkRaptor42]

I have a bracket, need the whole system or none at all.

[Nismo241]

well sorry, I don't have it, good luck finding one.

[RedlineRacer]

do you have a cold air? i might be interested in buying it if you do.

[Nismo241]

bump

[Domexicano]

How much for clutch, pressure plate, throwout bearing and slave cylinder? (For the SOHC tranny)

[Nismo241]

Originally posted by Domexicano
How much for clutch, pressure plate, throwout bearing and slave cylinder? (For the SOHC tranny)


Ummmmm......How does 125+shipping sound.

[Nismo241]

The clip is supposed to be here sometime in the middle of the week, so anything needed from the KA24E motor is now available to ship out by the end of the week, anything needed I have everything.

[Nismo241]

OK, everything off of the KA24E is available now. I have absolutley everything under the hood. Just let me know what you want.

[Domexicano]

Does the alternator still work? How much for it?

[Nismo241]

Need to sell this stuff, I need parts for my RB swap

[Nismo241]

The alternator still works and I'm asking 50+ shipping for it, in case you didn't recieve my PM. If you still are interested I can sell you the clutch parts and the alternator for 125+shipping.

Also, Redline Racer, I still have the cold air. I'm thinking the buyer before doesn't want it anymore. If you want it I'll sell it for 125+shipping. I paid 252 for it new and this is the last one made and sold.

[hurleyboi514]

do you have the crank out of the 95 KA still??

[Nismo241]

yeah but it needs some work. The motor threw a rod and it scratched it up pretty good. I think you can have it redone by a machine shop. If you are interested in it tell me and I"ll take pics of it and send them to you.

[Nismo241]

bump

[TimeLapseRacing]

How about the oil pan? Do you still have it for the ka24e, and how much?

[Nismo241]

Originally posted by TimeLapseRacing
How about the oil pan? Do you still have it for the ka24e, and how much?

Wel, I'm not sure how much an oil pan goes for. What do you think is reasonable.

[hurleyboi514]

oh wel, the one im rebuilding did the same thing, so ill just look into machining mine. thanks though!

(oh, what about the SOHC pistons, what would u want for them??)

[Nismo241]

Not sure how much they are new, I'll let them go for 100 for all four, + shipping, does that sound reasonable?

[Nismo241]

bump

[hurleyboi514]

what year KA24E where they out off?? and how many miles on the engine? im intrested, but im not positive yet...

[Nismo241]

The motor is an 89, and I have no idea how many miles. When I bought the motor it had 185psi compression across the board. It's the second motor in my car and supposedly has under 90K but I'm not sure how correct that is.