PDA

View Full Version : CA SoCal*LBC* S13 SR20DET BLACK TOP SWAP*COMPLETE

SUPERSTAR
11-03-2008, 04:19 PM
oK Guys here it is.
I am selling my black top swap.

Got the swap done in my vert by Marco at SR20store Last June. It was driven for less than 100 miles since then, motor had 32,000 miles on it.
I am building the car to different specs than original plan, so I must sell it to purchase new power plant. I am taking a loss on the labor, but oh well.

Here is what swap comes with. (USED)
SR20DET black top complete (STOCK TURBO)
Good hoses, belts, new plugs,new mounts.
Trans with crossmember
Drive Shaft
VLSD with one missing axles
NEW Greddy FMIC
All the Wiring, ECU and ignitor Chip
NEW Walboro 255L

Engine Goodies* before install he cracked open and replaced these:
New Greddy Steel Head Gasket
New BC intake/exhaust cams
New BC valve springs

Motor runs strong and reliable and have reciepts to show for all the parts.I don't buy junk or parts from unreliable shops or people.

I will post more pics of it. Swap is ready for pick up. NEW PRICE *Price $3,500 WILL NOT PART OUT SWAP* PM me or Text me for faster response 714-345-3067 Ernie


http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 1024x768 and weights 157KB.http://i295.photobucket.com/albums/mm159/DTC-SUPERSTAR/pinky9.jpg






http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 1024x768 and weights 187KB.http://i295.photobucket.com/albums/mm159/DTC-SUPERSTAR/pinky8.jpg

http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 1024x768 and weights 146KB.http://i295.photobucket.com/albums/mm159/DTC-SUPERSTAR/pinky4.jpg

http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 1024x768 and weights 115KB.http://i295.photobucket.com/albums/mm159/DTC-SUPERSTAR/pinky5.jpg
240love
11-04-2008, 08:33 AM
bump for the most legit seller i know!!
SUPERSTAR
11-04-2008, 06:40 PM
Thanks, Edgar.

C'mon guys come pick this up. You want a good set up? This is it.
nrmskate
11-04-2008, 06:43 PM
Sorry to bash anything, but, isn't it like 2300$ installed?

and idk, 500-600$ for the Greddy FMIC and another 100$ for the fuel pump.

Im not trying to bash, im just asking you to state whats different than any other sr
gripstr
11-04-2008, 07:07 PM
Sorry to bash anything, but, isn't it like 2300$ installed?

and idk, 500-600$ for the Greddy FMIC and another 100$ for the fuel pump.

Im not trying to bash, im just asking you to state whats different than any other sr

Cost me $3400 for a bone stock blacktop swap,

sr20store is a legit shop known to source only the best motors.

Throw in those goodies, and you are looking well over $4500 with upgrades.
SUPERSTAR
11-04-2008, 07:25 PM
Thank you!

I know a guy who can do a swap installed for 1500.00, but good luck.
SUPERSTAR
11-04-2008, 07:26 PM
:faint::faint::faint::faint::faint::faint::faint:: faint::faint:
karl wasabi
11-05-2008, 03:27 PM
Wow. That's a good deal. Too bad I just did an RB20 swap.

Bump for a VERY legit seller and person. =)
YoungGun
11-05-2008, 03:54 PM
This is legit right here.
boogerlovers
11-05-2008, 10:12 PM
Sorry to bash anything, but, isn't it like 2300$ installed?

and idk, 500-600$ for the Greddy FMIC and another 100$ for the fuel pump.

Im not trying to bash, im just asking you to state whats different than any other sr

your lucky there is no more rep...:mepoke:
krisdeezy
11-05-2008, 10:13 PM
your lucky there is no more rep...:mepoke:


LOL ^^

bump for ay leggit guy !
dtc 360RT
11-05-2008, 10:23 PM
Sorry to bash anything, but, isn't it like 2300$ installed?

and idk, 500-600$ for the Greddy FMIC and another 100$ for the fuel pump.

Im not trying to bash, im just asking you to state whats different than any other sr

wait, what the fuck?!? $2300 installed for an SR?!...i just might have to tow my 40 to whereever the fuck "IL" is for that.

how much more if you install it?











IL= Illinois, i know. i just said it for dramatic effect.
boogerlovers
11-05-2008, 10:28 PM
wait, what the fuck?!? $2300 installed for an SR?!...i just might have to tow my 40 to whereever the fuck "IL" is for that.

how much more if you install it?











IL= Illinois, i know. i just said it for dramatic effect.

lol...why didn't you go to the meet? you missed a really good joke on ernie :keke:
jarredd
11-06-2008, 12:10 AM
so you do a lot of swaps?
xllivillx
11-06-2008, 07:58 AM
will you take $13k worth or matco tools with some cash on your end?
boogerlovers
11-06-2008, 01:48 PM
will you take $13k worth or matco tools with some cash on your end?
doubtful man...he is trying to get some cash together for a different setup
SUPERSTAR
11-06-2008, 05:01 PM
will you take $13k worth or matco tools with some cash on your end?

Sorry man, I am trying to get cash for new power plant.

I will work on price. I need to get this sold. Let me know.
SUPERSTAR
11-07-2008, 12:00 AM
sold******** for 2000.00 and pair of s14 seats.