S13 redtop SR20det motor only

[design240sx]

Price: SOLD


#GREAT FOR BUILT*

S13 Redtop SR20 motor RWD

*complete head and block only with bad piston and rings on the cylinder #4

Everything is taking out for a rebuild but decide to go a different set up. I blew my piston and piston ring. Cyl 4. the rest is good. but would recommend to replace piston and rings. still have all the bolts and cap bearings like the main and rods. i check the cylinder wall 1 through 4. 1-3 is good. i check cylinder #4 has a little nick on it. good for bore piston whoever wants to built a SR20 motor. not really that bad of a damage. come check it out. this motor was well taken care and motor is clean until piston ring went on me.


it comes with:
-Complete Head with: cams, lifters, shims, rocker arms, springs, valve stem, and valvecover
-Bare Block. comes with all the bolts that belongs to the bottom end
-stock rods, bad piston and rings needs to be replace.
-ARP head studs
-Cosworth Metal Headgasket and comes with copper spray
-stock Intake manifold with no fuelrail and IVAC.
-New valvecover gasket and new veal seal stem gasket.
-Greddy style oil pan. you well need to buy your screws for it.
-All the bolts and nuts from the block i have. are in zip lock bags and mark them where they belong.
-Water pump
-Front oil pump cover
-lots more


-No turbo or turbo manifold.
-No power steering pump
-No alt
-No Crank pulley
-No Tranny and flywheel+clutch
-No hardness and ECU
-No coilpack
-No CAS


http://i121.photobucket.com/albums/o...T/pict0178.jpg (http://i121.photobucket.com/albums/o234/richardkue/SR20DET/pict0178.jpg)

http://i121.photobucket.com/albums/o...0DET/block.jpg (http://i121.photobucket.com/albums/o234/richardkue/SR20DET/block.jpg)

http://i121.photobucket.com/albums/o...DET/crank4.jpg (http://i121.photobucket.com/albums/o234/richardkue/SR20DET/crank4.jpg)
full view of the crank
http://i121.photobucket.com/albums/o...DET/crank1.jpg (http://i121.photobucket.com/albums/o234/richardkue/SR20DET/crank1.jpg)

http://i121.photobucket.com/albums/o...DET/crank2.jpg (http://i121.photobucket.com/albums/o234/richardkue/SR20DET/crank2.jpg)

http://i121.photobucket.com/albums/o...DET/crank3.jpg (http://i121.photobucket.com/albums/o234/richardkue/SR20DET/crank3.jpg)

http://i121.photobucket.com/albums/o...20DET/cyl1.jpg (http://i121.photobucket.com/albums/o234/richardkue/SR20DET/cyl1.jpg)
Cylinder #1
http://i121.photobucket.com/albums/o...20DET/cyl2.jpg (http://i121.photobucket.com/albums/o234/richardkue/SR20DET/cyl2.jpg)
Cylinder #2
http://i121.photobucket.com/albums/o...20DET/cyl3.jpg (http://i121.photobucket.com/albums/o234/richardkue/SR20DET/cyl3.jpg)
Cylinder #3
http://i121.photobucket.com/albums/o...20DET/cyl4.jpg (http://i121.photobucket.com/albums/o234/richardkue/SR20DET/cyl4.jpg)
Cylinder #4
http://i121.photobucket.com/albums/o...T/PICT0176.jpg (http://i121.photobucket.com/albums/o234/richardkue/SR20DET/PICT0176.jpg)

http://i121.photobucket.com/albums/o...T/PICT0179.jpg (http://i121.photobucket.com/albums/o234/richardkue/SR20DET/PICT0179.jpg)

http://i121.photobucket.com/albums/o...T/PICT0180.jpg (http://i121.photobucket.com/albums/o234/richardkue/SR20DET/PICT0180.jpg)

http://i121.photobucket.com/albums/o...T/PICT0181.jpg (http://i121.photobucket.com/albums/o234/richardkue/SR20DET/PICT0181.jpg)

[boosted101]

hey man can i get the oil squirters out of it ? i broke 2 of mine

[design240sx]

hey man can i get the oil squirters out of it ? i broke 2 of mine

sorry dont really want to part out. i want to sell the whole because i need to get rid of this whole motor set. its really for a built! any offer is welcome.

[Sr40Man]

i can give u 400 for everything is there anything wrong with the crank like spun bearins or anything? let me know somethin

[design240sx]

pm you. no spun bearing.


i can give u 400 for everything is there anything wrong with the crank like spun bearins or anything? let me know somethin

[sentrarider13]

do you still have the head for sale????

[design240sx]

nope sorry. but i do have a friend with a s15 head. sold my motor!!!

[sentrarider13]

do you still have the head???? i am very interested in buying it asap

[sentrarider13]

how much is he lookin to get for it and is it in the same condition yours is in??? and is it complete like yours also????

[n240sxfnatic]

How much would you want for the crankshaft only?

[design240sx]

sorry motor is sold. but i do have a friend that has a s15 head.

[n240sxfnatic]

sorry motor is sold. but i do have a friend that has a s15 head.

And that would help me how?

[design240sx]

And that would help me how?

i said motor is sold. and listed that i have a friend with a s15 head for the other guys that were looking for a complete head.