S14 SR20det not starting after BOV install....Help

[p4hang]

I have a S13 coupe with a S14 SR swapped in. upgrades are FMIC, HKS catback exhaust, Q45 ignitor. here is the problem I had the swap done and was running with a Z32 MAF. Car was idling but wasnt drivable because of the Z32 maf. At this time the car didnt have a BOV yet. A week ago I installed an HKS BOV. I started the car and it was running fine (Z32 maf still installed). I then borrowed a friends S14 SR maf to see if it would run better. Installed the S14 SR MAF and got nothing. I switched everything back to the way it was before the s14 SR MAF was installed and the car still wont start. I check voltage to the MAF wires and that was not the problem. Car has fuel, spark, and cranks but wont turn over. Help me please.

[tr0n9h]

did you change the wire when u swap from z32 to s14 maf?

[p4hang]

yes, i found the schematics and transposed pinouts from Z32 maf to S14 maf. Car wont start even with the Z32 maf back in.

[badoon]

Hey,i was wondering how u did your fmic,i had a prob with the piping on mine(passenger side) and now needs to be redone,I have an s13 w a S14 sr swap as well. Any pics would help,or where u got the piping that fit your application

u could PM if u want or whatever
I havnt done the BOV yet,so im no help on that:2f2f:

[fliprayzin240sx]

^^^are you running pipings for an S14 SR? Cold pipe is different between S13 and S14 SRs.

[p4hang]

I actually just used some extra piping and got it to all fit. Right now I got a S14 SR coldpipe on it.