97 Q45 front brakes

[MrMcgarrett]

2 piston calipers.
These are bigger than the 90-96.
These use a 296mmx28mm rotor.
Older model uses a 280mmx28mm.
Rotors could use a resurfacing but I don't think it is needed.
These use bigger mounting bolts so you will need to open up the mounting holes on the spindles to 14mm.
Pads are almost done.
Stock brake lines can be used.

$120

http://i92.photobucket.com/albums/l5/MrMcgarrett/q45brakes.jpg

[MrMcgarrett]

Back up to the top

[MrMcgarrett]

Up to the to again.

[Ali 556]

These use bigger mounting bolts so you will need to open up the mounting holes on the spindles to 14mm.



yea,

and if you anyone don't know whats that mean check the "350Z Track Brembo Into S14" Thread and do the same for the fronts
:hyper:
=

Drill the mounting holes in your spindel from 12mm to 14mm....:duh:

GLWS OP

Ali