ae86 2jz

[shytdoode]

what kind of custom work would need to be done or is it a stright drop in swap? nub question but yeah...

[lflkajfj12123]

in over your head

if you don't know then it'll never happen for you

[azndoc]

do it

shit will be sick

have fun

and good luck.

[cc4usmc]

That makes 4 and a half out of 5 dumb threads for this guy. It's a half because it's a classified ad, but it's also for a Honda.

[ayuaddict]

drops right in.

[Sileighty_85]

Nah man RB26
http://i73.photobucket.com/albums/i235/Neil_85/Nago/RB26DETPoweredAE86.jpg

http://i73.photobucket.com/albums/i235/Neil_85/Nago/RB26AE86.jpg

Or an SR
http://i73.photobucket.com/albums/i235/Neil_85/Nago/SR20DETAE86.jpg
http://i73.photobucket.com/albums/i235/Neil_85/Nago/SR20DETHachi.jpg

[qwikspool]

you should do it and its a custom work. you be one of the coolest guy on the block:rolleyes::rimshot:

[Sileighty_85]

Also this has nothing to do with a Nissan

Chat General Discussion About The Nissan 240SX and Nissan Z Cars
2J in an AE86... ? not the same

[NervGS]

He got lost on his way to Club4AG.

-glenn

[twotoes]

gorilla glue, zipties, duck tape, blowtorch, 1 bullet, gun

if you have those tools everything should work out great for you...

[irax]

7mgte has been done before

[ZenkiGTS]

way in over your head....

[worr20]

I heard an LSx motor will drop straight in to my hyundai. Does anyone know if I can still use the hyundai trans?

But seriously dude, Its alot of work

[spikNspan]

Everyone has to start somewhere, people telling him he's in over his head (no matter how true that might be) isn't helping answer this guys question at all. It's going to be a lot of custom fab work. Cross member, mounts, drive shaft, rear end, firewall perhaps, etc. lots of work, but anything is possible. Just keep researching and figuring out exactly what it would take to do it.

[finesses240]

I have done many sr swaps into the corolla and that is more than enough for that chassis. You could even do a f20 if you want, that's a pretty intense ride as well. If you want I will put an sr or f20 into your ride. pm me if you are down.

[SexPanda]

sr would be your best bet. Cheaper, good aftermarket, its been done before, less fab work, etc.

And 200hp in a car that weighs in at 1 ton... Thats plenty to get yourself killed. GL.

[bunnathp]

i think hes talking about this...

http://img.villagephotos.com/p/2005-9/1080088/2jayZ.jpg

[2wo4orty]

lol Nas on the side

[VQMaxFan]

i think hes talking about this...

http://img.villagephotos.com/p/2005-9/1080088/2jayZ.jpg

wrong swap, he didnt say he wanted nos

[darkevildrifter]

if you want it done right call toysport and have about 10-13 grand to blow..... but you always go to www.club4ag.com (http://www.club4ag.com) and get more info

[bunnathp]

LOL. i didnt notice that was Nas/Nos. hahahha

[soreballz]

if you want it done right call toysport and have about 10-13 grand to blow...
Since when can Toysport do anything right?

[SlideWell]

Since when can Toysport do anything right?

no shit, youll be waiting 2 years for all the parts.

[xplicit240]

hey man anything can be done. even though this is a nissan forum, plenty of our members have other rides that are not nissan.

you would probably need to consult a race shop who can fabricate.

2jz, rb26, sr20, f20, 20b everything and anything has been put into every car nowadays.

if you can fab then you can save shitloads of money. if you cant then off to the shops you go.

if you ever decide to do this, please take some pictures and post them up, i would love to see it done step by step.

dont let anyone tell you that you cant do it. they just haters! =P

i think you should go with a 20b! its freakin fast.

[ThatGuy]

Chat General Discussion About The Nissan 240SX and Nissan Z Cars

Does this Thread fit into that category?

No, it does not.

:lockd: