My Mass Exodus! Tomei, Greddy, Exedy, Nismo

[scottie]

Holset HX35 Turbo (new) = $600 (T3 Divided, VBand Exhaust, AN fittings) *SOLD*
Greddy Turbo Timer =$70 *EDITED*
Greddy Intake Mani (custom 1/4" NPT fittings) = $500
Greddy Oil Pan = $240 SOLD
Tomei Oil Block Adapter (new) = $150
Nismo 740cc Injectors = $375 (been flow tested) SOLD
Nissan -6AN Fuel Rail = $75 SOLD
Hybrid GT Spec S13 Intercooler Kit = $400 (black 3 ply couplers w/Tbolt Clamps)
TIAL 44mm WG = $300 *SOLD*
TIAL 50mm BOV (new) = $200
EXEDY Twin Disc = $900 (new discs, new TOB, new Nismo pivot ball, new MA Motorsport needle bearing)
Aluminum Drive Shaft = $300
300ZX MAF = $80
Project Nissan Motor Mounts (new) = $100 *SOLD*
ARP Head Studs (never used) = $100
Enjuku Ex Mani Bolts (never used) = $45 *SOLD*
Nissan OEM Clutch Slave Cylinder (new) = $50
AEM Boost Controller (new) = $250 *SOLD*

GREDDY PE GT Spec Exhaust (R-A-R-E) = $550 (ceramic coated, 3.25" full exhaust as in no cat needed)

SR Custom Valve Cover = $150 SOLD
SR Chipped ECU = $150
SR Engine Harness = $200 *SOLD*
SR Starter (reman) = $50 *SOLD*
SR Trans = $200
SR Rad Hose = $25
SR Heater Hoses (new) = $40
SR CAS = $50 *SOLD*
SR TPS = $50
SR Coil Packs = $100
SR Head (no parts) = $100 *SOLD*
SR PS Pump = $75 *SOLD*
SR Ignitor = $100

Silvia Front Fenders = $200

Pictures:
HX35 Turbo (blasted cover, -3AN Pressure Fitting)
http://i102.photobucket.com/albums/m99/scotheocelot/Holset1.jpg
http://i102.photobucket.com/albums/m99/scotheocelot/Holset2.jpg
I'll throw in the Downpipe, Intake:
http://i102.photobucket.com/albums/m99/scotheocelot/DP1.jpg
Motor Mounts
http://i102.photobucket.com/albums/m99/scotheocelot/Cusco2.jpg
Tial 44mm WG
http://i102.photobucket.com/albums/m99/scotheocelot/Tialwg1.jpg
Custom 1-Piece Aluminum Driveshaft
http://i102.photobucket.com/albums/m99/scotheocelot/DriveShaft.jpg
Exedy Twin Disc
http://i102.photobucket.com/albums/m99/scotheocelot/Exedy.jpg
Valve Cover w/-10AN Fittings (added -10AN on side for oem crank evac)
http://i102.photobucket.com/albums/m99/scotheocelot/VC5.jpg
Greddy TR EVO GT Spec (uber rare, especially now)
http://i102.photobucket.com/albums/m99/scotheocelot/TREvo1.jpg
Misc BRMS Lines. Ill throw them in with any item.
http://i102.photobucket.com/albums/m99/scotheocelot/OilLines1.jpg
HDI GT Spec Intercooler Kit for S13 SR20DET w/Extra Couplers.
http://i102.photobucket.com/albums/m99/scotheocelot/HDI1.jpg
http://i102.photobucket.com/albums/m99/scotheocelot/HDI2.jpg
Bings Rear Sway Bar Endlinks = $30
http://i102.photobucket.com/albums/m99/scotheocelot/EndLinks.jpg
Tomei Oil Block Adapter
http://i102.photobucket.com/albums/m99/scotheocelot/OilAdt3.jpg
http://i102.photobucket.com/albums/m99/scotheocelot/OilAdt4.jpg
Modified OEM Fuel Rail w/-6AN Fittings
http://i102.photobucket.com/albums/m99/scotheocelot/FuelRail.jpg
OEM Silvia Fenders
http://i102.photobucket.com/albums/m99/scotheocelot/FF1.jpg


I will get more pictures up in the coming day or so. Let me know if you have any questions. Im located in Oklahoma.


Scott

[khoadogg]

wow, bump for an awesome turbo deal!

[Jaygotboost]

Yeah man someone jump on that Holset turbo I have a hx35w on my Z and that things a beast ....

[radupanait]

True Ive ran those turbos before on my dsm BEYOND best bang for the buck and its BRAND NEW. Looking for any trades pm me, at least to lower the price :)

[JFoxx]

interest in oil pan and sway bar end links.....where are you located?

[scottie]

interest in oil pan and sway bar end links.....where are you located?

Im located in Oklahoma.

[HellaSlowAndOld]

how much for the FMIC set shipped to 95621 (sacramento cali)

thanx

[brndck]

the greddy mani is for redtop or blacktop? price shipped to 92648?
and what fittings are modified and how will that affect installation?

[scottie]

the greddy mani is for redtop or blacktop? price shipped to 92648?
and what fittings are modified and how will that affect installation?

I will snap some photos for you. The manifold is "brushed" but not fully polished. I modded it by drilling and tapping all the vacuum sources for (1/4") NPT. NPT seals FAR GREATER by design than the metric crap that comes with the Greddy. You can either use my AN fittings and plugs I will provide with the manifold, OR you can go to any hardware store and purchase barb NPT fittings for $0.40 if you wish to use a rubber hose.

Items I will include with manifold are:
New IACV Gasket
New TB Gasket
New IACV Hose
New OEM Nissan Fuel Rail Rubber Grommets
New Thermal Intake Gasket
New -3AN Fittings and Plugs

And lets be honest. This is the real deal that now cost $600++ today. I will not take anything less than what I have posted. But with all that you are getting you cant beat it.

[5t341tH]

hey still got those swaybar endlinks?
would u do 30 shipped for em?

[sleepinsilvia23]

When was the starter rebuilt?
Good working condition?

How much shipped to 19064? i need it ASAP

[scottie]

hey still got those swaybar endlinks?
would u do 30 shipped for em?


$35 and they are yours. PM your information if interested.

[scottie]

All PM's sent.


I want to make one thing clear about this turbo. This is not some Ebay crap that may or may not be new or in good condition. This turbo was rebuilt by Turbo Technologies in Oklahoma City with a New Center Section, Seals, Coated Exhaust Housing, New -4AN Oil Inlet w/Rubber Seal, New Oil Return Gasket, Adapter and -10AN fitting. The Compressor Housing is media blasted so you can paint/coat it however you wish. Its been drilled, tapped and comes with -4AN x 1/4" NPT for a pressure source. You can use a barb fitting if you wish. I will include the SR block fittings for the oil inlet and return as well!!!

But please dont ask if I will sell it for $300 like some on Ebay.

Scott

[ross.cottrill]

scott!!wow man ive been following your build for a while wiating to see the results.sucks that you gotta get rid of it man!i hope all is well and glwts!!

[Secretsquirrel]

willing to ship the fenders?



SS

[flawless]

How much HP were you trying to reach with this setup?




quote=scottie;2399444]All PM's sent.


I want to make one thing clear about this turbo. This is not some Ebay crap that may or may not be new or in good condition. This turbo was rebuilt by Turbo Technologies in Oklahoma City with a New Center Section, Seals, Coated Exhaust Housing, New -4AN Oil Inlet w/Rubber Seal, New Oil Return Gasket, Adapter and -10AN fitting. The Compressor Housing is media blasted so you can paint/coat it however you wish. Its been drilled, tapped and comes with -4AN x 1/4" NPT for a pressure source. You can use a barb fitting if you wish. I will include the SR block fittings for the oil inlet and return as well!!!

But please dont ask if I will sell it for $300 like some on Ebay.

Scott[/quote]

[jr_ss]

Interested in the Tomei block adapter... I'll pm you...

[Shawn89]

I was wondering if you still have the silvia fenders, and if so how much shipped to Columbus Ohio 43207?

[mikez97]

how much for the valve cover and the head shipped to 34990
and pics of the head please

[bigtiger1810]

can you sell me 1 coil pack?

[scottie]

scott!!wow man ive been following your build for a while wiating to see the results.sucks that you gotta get rid of it man!i hope all is well and glwts!!

Hey thanks! Don't stop watching! Just a different direction in power :-)

[scottie]

How much HP were you trying to reach with this setup?




Mid to Upper 400rwhp.

[vodka2]

bump for clean parts.

[scottie]

Thanks for the orders guys! I will be shipping out stuff tomorrow. I still have several items.


About the Silvia fenders, I will try to track down a box big enough to ship them in. I tried to fit them in the box my Origin Lab doors came in but were just a little too small. I dont mind shipping, its just going to be another $80 the buyer will have to pay. I will look into it this weekend. Pictures coming soon of the other items.


Scott

[scottie]

Be careful with this guy, Jeff, as he screwed me. PM me for details or you can read the thread I'm starting about the situation.

His Trader rating: http://zilvia.net/f/traderratings.html?u=34313


Oh, ok. At first I thought you were talking about me! I was like "Um, I've never screwed anyone out of any parts!" In fact Im shipping stuff today!!

Here is some shots of the TIAL 50mm BOV and AEM Boost Controller, still in their boxes!!

http://i102.photobucket.com/albums/m99/scotheocelot/parts001.jpg
http://i102.photobucket.com/albums/m99/scotheocelot/parts002.jpg
http://i102.photobucket.com/albums/m99/scotheocelot/parts003.jpg
http://i102.photobucket.com/albums/m99/scotheocelot/parts004.jpg


Scott

[Chrischeezer]

will that drive shaft fit a HICAS (was abs) s13 chassis? SR20 swap with silvia lsd

if it will fit.. i want it.

[scottie]

will that drive shaft fit a HICAS (was abs) s13 chassis? SR20 swap with silvia lsd

if it will fit.. i want it.


Aw man. This drive shaft was made for a Non-ABS Non-Hicas setup.

[scottie]

More Stuff I keep finding:

Custom Center Console Gauge Pod = $150
http://i102.photobucket.com/albums/m99/scotheocelot/IPod2.jpg
http://i102.photobucket.com/albums/m99/scotheocelot/IPod1.jpg
http://i102.photobucket.com/albums/m99/scotheocelot/IPod2-1.jpg
http://i102.photobucket.com/albums/m99/scotheocelot/IPod3.jpg
http://i102.photobucket.com/albums/m99/scotheocelot/IPod4.jpg

The gauge pod has a metal back and cut so well you dont need anything to hold 58mm gauges in place. Painted Black to match interior black pieces. Epoxy resin, plastic, aluminum, fiberglass and a little witchcraft. I have Stewart Warner Electronic Oil Pressure and Fuel Pressure gauges w/ red led's that I will include for another $80.

OEM EuroSpec S13 Silvia Cluster = $145
http://i102.photobucket.com/albums/m99/scotheocelot/DTMCluster-1.jpg


OEM Nissan Clutch Master Cylinder (2000 miles) = $40
SPL SS Clutch Hose = $15


Scott

[scottie]

Pictures of items for sale (for those who want to see it)

OEM Clutch Slave Cylinder = $50
http://i102.photobucket.com/albums/m99/scotheocelot/parts012.jpg

Greddy Turbo Timer = $65
http://i102.photobucket.com/albums/m99/scotheocelot/parts013.jpg

SR Heater Hoses (new) Enjuku Racing set = $40
http://i102.photobucket.com/albums/m99/scotheocelot/parts014.jpg

Nismo Shift Knob = $40
http://i102.photobucket.com/albums/m99/scotheocelot/parts015.jpg

SR Ignitor = $100
http://i102.photobucket.com/albums/m99/scotheocelot/parts017.jpg

SR Coil Packs = $100
http://i102.photobucket.com/albums/m99/scotheocelot/parts018.jpg

SR IACV = $40
http://i102.photobucket.com/albums/m99/scotheocelot/parts021.jpg

S15 Exhaust Manifold Gasket (new) = $35
http://i102.photobucket.com/albums/m99/scotheocelot/parts022.jpg

SR TPS = $50
http://i102.photobucket.com/albums/m99/scotheocelot/parts023.jpg

Nissan OEM Clutch Master Cylinder = $40
http://i102.photobucket.com/albums/m99/scotheocelot/parts019.jpg

[scottie]

Radiator w/Fan and Custom Shroud = $300 *SOLD*
http://i102.photobucket.com/albums/m99/scotheocelot/Shroud4.jpg
http://i102.photobucket.com/albums/m99/scotheocelot/Shroud5.jpg
http://i102.photobucket.com/albums/m99/scotheocelot/FSetup3.jpg

[crazybb]

would you take 220 for the AEM Boost Controller shipped to 72903?

[harangatang]

is the ps pump in proper working order? The last one I bough had a bent shaft..
lmk!

[mikez97]

could you make a deal on the ecu and the tial?
what is some info in the ecu?
i have a 97 sr20det with a good amount of aftermarket stuff.
thank you and lmk

[scottie]

is the ps pump in proper working order? The last one I bough had a bent shaft..
lmk!

PS is just sold! I apologize i didnt update the first post. I will do that now.

[scottie]

could you make a deal on the ecu and the tial?
what is some info in the ecu?
i have a 97 sr20det with a good amount of aftermarket stuff.
thank you and lmk

The ECU = 62. It has a PLMS Daughterboard. PLMS Developments are the guys who created NisTune. These boards and chips are awesome. It can hold 4 maps and you can purchase a MAP switcher from them. Which Tial did you want? The Tial 44mm WG is pending sale. I will know soon if its not sold. The ECU chipped is a steal at that price its listed for. Pretty much all of the stuff is. PM me if you want more info.

Scott

[scottie]

would you take 220 for the AEM Boost Controller shipped to 72903?

I will do $240 shipped. Brand new in box! PM me if you want it!


Scott

[crazybb]

alright whats your paypal addy?? i will get the aem controller off of you

[scottie]

Thanks again for the purchases!! People are getting some nice parts that I fully expect to hear feedback on!


Scott

[scottie]

Everything has been shipped! Still have several parts available. For those big SR20 rwhp guys, I know you need a clutch! Anyways, seems like people are already enjoying the parts. Please dont hesitate to pm me if you see something you need. Thanks again!


Scott

[hottscennessey]

PM Sent

msg2shrt

[SR2Zero]

Will you ship the silvia fenders? If so how much to 29388.

[penco]

Do you have any power steering lines?

[AznDrftr.]

ARP Head Studs (never used) = $100
300ZX MAF = $80

shipped 76549

[scottie]

All PM's sent.


UPDATE:
I only have a few items left so I thought I would clear this up before I get any more PM's.

REMAINING ITEMS:
SR Transmission = $200
Greddy TR EVO Exhaust = $450 (baddest sr exhaust sound period)
HDI Intercooler Kit = $375
Greddy Oil Pan = $200
Greddy Intake Mani = $450 (includes all new gaskets, O-rings, AN Fittings, hoses)
Greddy Turbo Timer w/Harness = $60
S13 Aluminum Non-ABS Driveshaft = $300 (spicer grease replaceable ends)
Coil Packs = $20/unit
SR Ignitor = $80
300Z MAF = $80
S13 Clutch Master Cylinder = $50
Nissan Clutch Slave Cylinder = $50 (new)
Exedy Twin Disc = $850 (new discs, new needle thrust bearing, new nismo pivot ball) If requested I will throw in new slave cylinder for $10.

Thanks again to everyone who has purchased stuff. I've received really good feedback so I hope everyone puts them to good use. Thanks!

Scott