txrxs
10-17-2008, 02:13 PM
Problem:
Car leans out(16ish afr) in transition from vac to boost. This is only for a split second then goes to 11ish afr (still not dialed in) to redline.
Basic info:
KA24E
T3 turbo @10psi
550 injectors
Walbro 255
Aeromotive FPR
SAFCII tuned to read MAP for throttle input. High Map kicks in at 0psi. Yes, I could set the low map at zero and high map for 10psi, but first I want to remedy this issue. I've tried to have the high map start before boost to fix this, but to no positive results.
Any advise would be great.
Car leans out(16ish afr) in transition from vac to boost. This is only for a split second then goes to 11ish afr (still not dialed in) to redline.
Basic info:
KA24E
T3 turbo @10psi
550 injectors
Walbro 255
Aeromotive FPR
SAFCII tuned to read MAP for throttle input. High Map kicks in at 0psi. Yes, I could set the low map at zero and high map for 10psi, but first I want to remedy this issue. I've tried to have the high map start before boost to fix this, but to no positive results.
Any advise would be great.