MrMcgarrett
10-14-2008, 08:51 PM
Bought this a while ago for a budget KA-T setup but I figure a T2 setup would be easier for me.
Turbo has shaft play and will most likely need a rebuild. Rebuild kits are cheap on ebay.
It will need new gaskets for the intake pipe and oil drain(needs a mounting bolt too).
Here are some specs I found on the turbo:
* Garrett model number: TB0322 (T3 series turbo)
* Compressor Trim: 60
* Compressor housing A/R: .60
* Turbine housing A/R: .63
* Horsepower Capabilities: ~325hp
* Internal Wastegate: Yes
* Wastegate setting: 7 psi
The wastegate is built into the outlet which I do not have so an external setup would be needed and I'm guessing that's what most people would use anyway.
$80
http://i92.photobucket.com/albums/l5/MrMcgarrett/fordt3002.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fordt3003.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fordt3004.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fordt3005.jpg
Turbo has shaft play and will most likely need a rebuild. Rebuild kits are cheap on ebay.
It will need new gaskets for the intake pipe and oil drain(needs a mounting bolt too).
Here are some specs I found on the turbo:
* Garrett model number: TB0322 (T3 series turbo)
* Compressor Trim: 60
* Compressor housing A/R: .60
* Turbine housing A/R: .63
* Horsepower Capabilities: ~325hp
* Internal Wastegate: Yes
* Wastegate setting: 7 psi
The wastegate is built into the outlet which I do not have so an external setup would be needed and I'm guessing that's what most people would use anyway.
$80
http://i92.photobucket.com/albums/l5/MrMcgarrett/fordt3002.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fordt3003.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fordt3004.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fordt3005.jpg