Sneak Peek - Mishimoto Jspec S13

[mishimoto]

Hello,

We wanted to give you a sneak peek at the Mishimoto S13.

Car is a Jspec S13. We heard someone posted the 'Highest Horsepower SR' on this forum. Look out - Dyno charts coming soon to top that.

Mod list is as follows:

Engine:

SR20DET Engine
BC Stroker Kit
BC Springs
BC Retainers
JE Pistons
Cometic Head Gaskets
ARP Head Studs
Total Seal Rings
Clevitte Bearings
Turbonetics GTK-650 Turbo
Artisan Tubular Manifold
Artisan Polished Intake Manifold
Deatchwerks 810cc Injectors
Mishimoto Intercooler
Mishimoto Intercooler Piping
Mishimoto Radiator
Mishimoto Transmission Cooler
Mishiomto Oil Cooler
Mishimoto Fan Shroud and Fans
Mishimoto Oil Catch Can
Mishimoto Radiator Cooling Plate
Artisan VBan Clamps
Artisan Cat Back Race Exhaust
AMSOIL 0w-30 Synthetic Oil
AMSOIL Oil Filter
AMSOIL Antifreeze
NOS Nitrous Kit with Intercooler Sprayer
HKS Cam Gears
HKS Fuel Rail
AEM EMS
AEM Digital Ignition System
Tomei Throttle Body
Tial Wastegate
Tial Blow Off Valve

Suspension and Brakes:

Tein Coilovers
Z32 Brakes w/ Upgraded Rotors and Pads
Reinforced Lower and Upper Suspension
5 Lug Conversion

Wheels and tires:

Konig Wheels
Toyo Tires T1R 235/35ZR19 Front
Toyo Tires T1R 265/30ZR19 Rear

Interior:

AutoPower 6 point Roll Cage
Removed back seat
Aluminum Door Panels
Carbon Dash
AEM Gauges
K-Sport Hydraulic E-Brake
Sparco Circuit Pro Seats
Sparco Harnesses
Sparco Steering Wheel

Exterior:

BASF R-M Mishimoto Orange Paint
BASF R-M Black Paint
ITZ-USA Body Kit
Origin 50mm Rear Fenders
Origin 40mm Front Fenders
APR Carbon Wing
Seibon Carbon Hood
TCS Carbon Mirrors

Transmission:

Competition Clutch Twin Disk Clutch
Competition Clutch Aluminum Flywheel
Kaaz 2 Way Limited Slip Differential
Reinforced Drive Shafts


Car will be in Chandler, AZ for HIN this weekend for a drift demo and at SEMA in the Mishimoto booth. Enjoy :D

http://yhst-62631657248580.us-dc1-edit.store.yahoo.net/I/yhst-62631657248580_2024_107879489

http://turbochargers.com/gallery/d/32581-1/IMG_5368.JPG

http://yhst-62631657248580.us-dc1-edit.store.yahoo.net/I/yhst-62631657248580_2024_107678175

[smelly240]

artisan = FReddy? im confused.

[mishimoto]

artisan = FReddy? im confused.

No. Artisan Performance. Made in USA.

Artisan Performance - "The Performance You Crave" - Quality Turbochargers, Turbo Kits, Turbo Upgrades, Performance Exhausts, Pulleys, Performance Packages and more... (http://www.artisanperformance.com/)

[orangejdmsilvia]

i like the halloween color combo =)

[mishimoto]

i like the halloween color combo =)

It's one nasty pumpkin.

[smelly240]

No. Artisan Performance. Made in USA.

Artisan Performance - "The Performance You Crave" - Quality Turbochargers, Turbo Kits, Turbo Upgrades, Performance Exhausts, Pulleys, Performance Packages and more... (http://www.artisanperformance.com/)

Looks like a GReddy knockoff to me - even has the rectangle where the GReddy Badge goes.

I dont think it being made one place over another makes it not a knock off.

the car looks good tho

[blueshark123]

i dont think this will be the highest hp sr at all

[mishimoto]

i dont think this will be the highest hp sr at all

I'm not sure what the other post claimed...but if I remember correctly it was in the 670 range. We're expecting well over that.

[240trainee]

I'm not thinking so.

What fuel you running?

[Om1kron]

I'm not sure what the other post claimed...but if I remember correctly it was in the 670 range. We're expecting well over that.

Nah it was like 800 horsepower, the dipshit sent me some ethug threat on myspace correcting his numbers. Pacman is the name :-/

[mishimoto]

Nah it was like 800 horsepower, the dipshit sent me some ethug threat on myspace correcting his numbers. Pacman is the name :-/

Good. An even better challenge!

[smelly240]

You might want bigger injectors to go over 676 that rhombus made (im guessing thats what you're thinking about being the "record"...) and i hate to tell ya - mazworx broke 1000 on the s14 and the s15 is crazier. you're gonna need more than that gtk650

[mishimoto]

You might want bigger injectors to go over 676 that rhombus made (im guessing thats what you're thinking about being the "record"...) and i hate to tell ya - mazworx broke 1000 on the s14 and the s15 is crazier. you're gonna need more than that gtk650


GTK is for pre-sema drift demo.. Turbo and fuel system will be upgraded before dyno runs.

[smelly240]

im curious to see what you put on it - and why...

should be neat to see how far the "artisan" parts can get you

[projectRDM]

Please get wider wheels. Or at least lower offsets, that looks horrid.

[mishimoto]

Please get wider wheels. Or at least lower offsets, that look horrid.

25mm spacers on them put on after the photos

[SoSideways]

25mm spacers on them put on after the photos

Why not take the photos AFTER you put them on?

Seriously, why do people rush to take a bunch of half assed stage of their cars, post them on the interwebz, get shot down, and then proceed to correct everyone by saying "oh the situation has been remedied by _________ action".

Well, why not just fix it, THEN take the pictures?

[mixedwell]

hahah i love the haters in zilvia.. you guys make my day.

man fuck what what all these guys say..

you gonna break that 1000hp mark? do it.
but on this forum, we aren't nice. we're like a bunch of pirates and ninjas and cowboys in a bar. you gotta put up or shuttup around here.


the car is nice tho. i just wish it would have been a usdm s13.. im not at all for RHD. but this is a jspec car.. so i can live with it.

[Oo_Skyline_oO]

what's your dyno run setup?? fuel type?? injectors?? turbo?? how much are you sqweezing??

[ROIDMONKEY]

Cometic headgasket?? come on bro's ,no hating just dont understand why going for the cheapest headgasket while u have a BC stroker kit that cost like 3000 bucks...
and yes on the wheels .. no no.. get better wheels .. to much bling stuff on the engine to use KONIG... get some WORK/VOLK/SSR/etc etc oh and low offset please NO SPACERSSSSSS

[mishimoto]

Why not take the photos AFTER you put them on?

Seriously, why do people rush to take a bunch of half assed stage of their cars, post them on the interwebz, get shot down, and then proceed to correct everyone by saying "oh the situation has been remedied by _________ action".

Well, why not just fix it, THEN take the pictures?


Ok, my mistake. I'll wait and you can see it on the cover of an upcoming magazine. How's that work for you?

[mishimoto]

Cometic headgasket?? come on bro's ,no hating just dont understand why going for the cheapest headgasket while u have a BC stroker kit that cost like 3000 bucks...
and yes on the wheels .. no no.. get better wheels .. to much bling stuff on the engine to use KONIG... get some WORK/VOLK/SSR/etc etc oh and low offset please NO SPACERSSSSSS

FYI, Cometic was a Typo:

http://www.turbochargers.com/gallery/d/32234-2/IMG_3781.JPG

[silviaguy240]

wait, where in delaware are you at?

[Brian]

Gee whiz.... and I haven't even come in to "hate".

...and I don't think I will either.

:)

[ROIDMONKEY]

FYI, Cometic was a Typo:

http://www.turbochargers.com/gallery/d/32234-2/IMG_3781.JPG
ok .. cool now... :) wheels were provided by KONIG?

[mishimoto]

Wilmington.

[silviaguy240]

no shit, maybe i could come check it out sometime?

[mishimoto]

It's in Houston right now unfortunately.. Car will be back here for winter hibernation after SEMA.

[mishimoto]

ok .. cool now... :) wheels were provided by KONIG?

Yes. . .If you want to see Volk's on a car, google "mishimoto evo x sneak peek" :-P

[mishimoto]

what's your dyno run setup?? fuel type?? injectors?? turbo?? how much are you sqweezing??


Still haven't decided yet, but honestly it will be whatever is needed to make the numbers we want to make, since we have all of the resources in front of us.

[ROIDMONKEY]

Yes. . .If you want to see Volk's on a car, google "mishimoto evo x sneak peek" :-P
thats cool . I just went to my garage and saw my TE's . :) ..
keep it up bro .. konig's are wayyy to weak for that overfender setup.

[SoSideways]

keep it up bro .. konig's are wayyy to weak for any setup.

There, I fixed it for you :bigok:

[ROIDMONKEY]

LOL ... u the man

[projectRDM]

Ok, my mistake. I'll wait and you can see it on the cover of an upcoming magazine. How's that work for you?

I wasn't going to be a dick, but you opened the door. Being featured on the cover of a magazine = the ghey. Complete and total ghey in my book. What that means to me is you're building a car simply to fill a niche in the 'scene' and to impress all the fanboys who are currently jerking off to last month's issue. If you're looking for recognition, you won't get it from me. If you're trying to impress someone, you won't do that either. While I appreciate anyone's efforts, you're coming from a point of having money thrown at you that you can throw right back at the car, anyone can do that if the finances allowed for it. What's more is you have the funds to do better and you're wasting it on a nearly 20yr old car. Nothing is more lame than having shit handed to you so you can show off in front of people. There are a lot nicer cars in the World simply because the owner didn't care about fame and fortune, they built the car as they would want it, they drive it every day, and *gasp* chip the paint on it every once in a while. Winning a few awards and taking home prizes in the local car show mean absolute shit.

The minute some magazine calls me and wants to do an article is the minute I throw a can of gas and a lit match at my car. The real enthusiasts never cared for popularity, and they still don't. You clearly care about nothing but that.

[SoSideways]

^ http://www.brevardmotorsports.org/forum/images/smilies/clap.gif

Russ for President!!

[azndoc]

Everyone has their different taste and what not.

I don't have a fully built 10,000 hp car, but I drive the fuck out of mine.

I think this car looks like MTV did it.

I don't know

Whatever.

Good luck with it.

The wheels are horrible. Seriously take a fucking sledge hammer to it.

[Dousan_PG]

yikes

i'm with russ and jack

nuff said.

[lolwut]

No comment on what has been said so far in this thread...

But... Those wheels look like they are from 1998. Barf.

[TheArkitekt]

it'll be a good dyno queen....maybe lol

[Om1kron]

I wasn't going to be a dick, but you opened the door. Being featured on the cover of a magazine = the ghey. Complete and total ghey in my book. What that means to me is you're building a car simply to fill a niche in the 'scene' and to impress all the fanboys who are currently jerking off to last month's issue. If you're looking for recognition, you won't get it from me. If you're trying to impress someone, you won't do that either. While I appreciate anyone's efforts, you're coming from a point of having money thrown at you that you can throw right back at the car, anyone can do that if the finances allowed for it. What's more is you have the funds to do better and you're wasting it on a nearly 20yr old car. Nothing is more lame than having shit handed to you so you can show off in front of people. There are a lot nicer cars in the World simply because the owner didn't care about fame and fortune, they built the car as they would want it, they drive it every day, and *gasp* chip the paint on it every once in a while. Winning a few awards and taking home prizes in the local car show mean absolute shit.

The minute some magazine calls me and wants to do an article is the minute I throw a can of gas and a lit match at my car. The real enthusiasts never cared for popularity, and they still don't. You clearly care about nothing but that.

You should put that in your application to ziptied if you ever try to register, and ask someone if they can embed a violin mp3 player to accompany such a heartwarming rant. :cry:

Orange cars are irritating, I don't like the wheels, the headlights are ugly and the motor is too shiny. Other than that it sounds like it will be a real beast either way. Most shops build a car to demonstrate their skills to put a car together.

If you gave half of the idiots here the money you have available to build your car they would be building the same cars going to drift events and hard parking hoping someone showed them respect for such a rad car.

In the end who cares, magazines for a shop car = free press and those 100's of fanbois will be ordering parts from him way faster than they will from any other shop that isn't getting magazine covers for their subpar builds.

And that's the truth.

[projectRDM]

You should put that in your application to ziptied if you ever try to register, and ask someone if they can embed a violin mp3 player to accompany such a heartwarming rant. :cry:

Orange cars are irritating, I don't like the wheels, the headlights are ugly and the motor is too shiny. Other than that it sounds like it will be a real beast either way. Most shops build a car to demonstrate their skills to put a car together.

If you gave half of the idiots here the money you have available to build your car they would be building the same cars going to drift events and hard parking hoping someone showed them respect for such a rad car.

In the end who cares, magazines for a shop car = free press and those 100's of fanbois will be ordering parts from him way faster than they will from any other shop that isn't getting magazine covers for their subpar builds.

And that's the truth.



I am a member, by invitation, they never even asked for an application. I logged on once like four years ago.
Still, the fact remains that the car seems to be built for the kids, nothing more, and that the kids who may feel the desire to buy products based on this car can't afford said parts anyway. It's filling a niche for all those involved, which is fine, but I don't see the need to drop to my knees and be flooded with envy. It's a flashy, shiny, aero'ed out car. Complete carbon copy of virtually every other 'drifter' or even ricer on the internet. There's nothing impressive about buying parts and installing them, any fool can do it. I don't know if you're just blatantly assuming we'd all go out and build the same thing, but you're wrong. I'd go buy a new car with a warranty and just leave it alone. You will also never find me, 240SX or not, anywhere near a car show, drift event, or anything else scene related.

[Om1kron]

I am a member, by invitation, they never even asked for an application. I logged on once like four years ago.
Still, the fact remains that the car seems to be built for the kids, nothing more, and that the kids who may feel the desire to buy products based on this car can't afford said parts anyway. It's filling a niche for all those involved, which is fine, but I don't see the need to drop to my knees and be flooded with envy. It's a flashy, shiny, aero'ed out car. Complete carbon copy of virtually every other 'drifter' or even ricer on the internet. There's nothing impressive about buying parts and installing them, any fool can do it. I don't know if you're just blatantly assuming we'd all go out and build the same thing, but you're wrong. I'd go buy a new car with a warranty and just leave it alone. You will also never find me, 240SX or not, anywhere near a car show, drift event, or anything else scene related.

lol fair enough :keke:

[Matej]

Car shows are cool.

[ayuaddict]

show cars are cool.

but arn't they supposed to look good?

[Matej]

The minute some magazine calls me and wants to do an article is the minute I throw a can of gas and a lit match at my car. The real enthusiasts never cared for popularity, and they still don't. You clearly care about nothing but that.
We're starting a new magazine called Xtreme Car 'n Race Driver and I've been meaning to ask you if you'd be interested in doing a full spread feature on your car.

[ROIDMONKEY]

this is turning into a big DRAMA

[kouki_pants]

maybe if you mount those wheels inside out they'll look better!!!!.

sweet offset brosef.

[projectRDM]

We're starting a new magazine called Xtreme Car 'n Race Driver and I've been meaning to ask you if you'd be interested in doing a full spread feature on your car.

Only if the full spread involves nothing more than me getting drunk and peeing on other people's cars. There's an orange one I'd like to take a stab at.

[OBEEWON]

Wow. Sippin...

Some of you guys need female companionship.

Orange is my favorite color.

[johngriff]

I agree with russ. This is just a bolt on nightmare.

Not a touch of fab work worth anything.

Mix of knock offs and parts popular in 1998.

Would make a good stunt car for a F&F movie to get destroyed.

And I thought the GTK had a black compressor housing with compressor surge vents on the inlet? Am I missing something?

http://www.turbochargers.com/store/images/gtk650.JPG

like so.

As far as "highest horsepower"

I would be surprised to see over 500 at the wheels on a dynojet.

[blu808]

Auto Power cage? WTF thats made for a lhd car.


Cool car though.

[SilviaDoctrine]

Don't mind the rude people in here. It's your car do what you want and let them hate as long as when you open the garage you appreciate whats sitting there. They are not the ones that are going to be looking at it, so your opinion matters most. GLW the build and if I may, I would say that the wheels should probably be replaced, but to each his own.

[clark]

well fuck, i think the car is cool.

good job and beat the piss out of it!

[silnismo]

Oh man, and i thought zilvia got soft when the rep system was gone.

i thought wrong.

[JVDSKYRINE]

Best thread EVAARRRRRRR! I love when guys dump all this money into engines and then throw civic rims on a wide bodied car...KONIGS rock my world:cj:

[ross.cottrill]

those wheels are DOPE cuz they have "prisma"lips.seriously if you ever get rid of them i call dibs!!!!

[Modrified]

there goes the sneek peek.

[ROIDMONKEY]

there goes the sneek peek.

lol yessssssssssss

[socal_kouki]

there goes the sneek peek.
/thread
/msg

[mishimoto]

Auto Power cage? WTF thats made for a lhd car.


Cool car though.


They have a RHD version available.

[niSm095]

Car looks good guys. keep it up and post up the numbers when you get em. Some people on here are way too bitter for their own good. I don't think the point's been made yet...but this car is being built to showcase your company's parts and ability with them...forget all the self-righteous bull on here...but don't forget to keep this updated.

[blu808]

It would be cool if they had a version that actually fits with some decency. You should bring the car to my shop after sema to get a legit cage installed.
Dimple died holes, full gusseting, etc.

They have a RHD version available.

[firelizard]

lol, I just had to laugh at how mishi gets jumped on mercilessly

It's a company car, obviously it's just going to jump on the current trends, and it's not gonna appeal to grassroots people. Although... the Konigs.... that's just er... considering the budget... not that great of a choice, sponsored or not.

The part I'm looking forward to is seeing what a (i hope will be) no-quarter-given powertrain buildup.

Then again, I'm sure with that budget, I could build a car that doesn't look like every other big budget show touring S-chassis.

[allntrlundrgrnd]

are we at the beach?

alot of sand in this thread











:hide:

[mishimoto]

It would be cool if they had a version that actually fits with some decency. You should bring the car to my shop after sema to get a legit cage installed.
Dimple died holes, full gusseting, etc.


Are your cages SCCA approved?

[mishimoto]

Everyone has their own opinion. We appreciate the criticism and the compliments either way. It's forums like this that keep the industry alive. Cheers.

[SoSideways]

are we at the beach?

alot of sand in this thread











:hide:

If we're at the beach, then I LOVE TURTLES.

[chuy]

Hey Im heading to HIN this weekend

[blueshark123]

Are your cages SCCA approved?


Im sure they are.

[BustedS13]

why would you use Toyos over your own in-house ZX tires? i hear they're used by people in the street racing world

[SILVIA_KIDs14.5]

You might want bigger injectors to go over 676 that rhombus made (im guessing thats what you're thinking about being the "record"...) and i hate to tell ya - mazworx broke 1000 on the s14 and the s15 is crazier. you're gonna need more than that gtk650
yeah and gonna need more then those wimpy 800cc injectors gonna need some 1600cc injectors if your gonna compete with mazworx 1000rwhp s14 or thery 1500wrhp s15 but good luck with the build

[SILVIA_KIDs14.5]

Cometic headgasket?? come on bro's ,no hating just dont understand why going for the cheapest headgasket while u have a BC stroker kit that cost like 3000 bucks...
and yes on the wheels .. no no.. get better wheels .. to much bling stuff on the engine to use KONIG... get some WORK/VOLK/SSR/etc etc oh and low offset please NO SPACERSSSSSS
hey don't knock the cometic head gasket cuz that will hold just about anything you can throw at it i mean if mazworx can run it on the 1000hp s14 i'm sure it can handle the 600+ they plan on running with it

[smelly240]

i agree - i use cometics on everything. never blown one yet... maybe this week?

[drftwerks]

orange cars look like big bags of gay dicks

[s13dan]

Speaking of high horse power SR's... What the hell happened to Rhombus??? I figured his car was ganna set some records..(668whp519ft/lbs)last i heard

[firelizard]

why would you use Toyos over your own in-house ZX tires? i hear they're used by people in the street racing world

Mishimoto, not Mashimoto.


Edit: Oh, never mind, I see you were actually using the F&F reference. I see what you did there ^_^

[cc4usmc]

Are your cages SCCA approved?

Yes.

Manji Parts : S13 SCCA roll cage. (http://www.manjiparts.com/product.sc?categoryId=3&productId=2)

[Saskacer]

why would you use Toyos over your own in-house ZX tires? i hear they're used by people in the street racing world
Hahaha, people still quote the fast and the furious?:cj:

[mishimoto]

Top Tuner Cars Pictures - 2008 SEMA Show - MSN Autos (http://autoshow.autos.msn.com/autoshow/SEMA2008/photogallery.aspx?cp-documentid=12464989)

[mishimoto]

updated pics

Check out the SEMA 2008 Photo Gallery of Mishimoto highlights (http://www.mishimoto.com/mishimoto-sema-2008-photo-gallery.html)

including our new fan shroud!

Nissan 240SX S13 Fan Shroud Kit 1989-1994 SR20 Engine, by Mishimoto (http://www.mishimoto.com/mishimoto-aluminum-fan-shroud-kits-nissan-240sx-s13.html)

[!Zar!]

Nnnnnnnnnoooooooooooossssssssssssssss!!!!!

[derek_s13]

no wonder the booth had so much traffic, mercedes terrell was there.

[Brian]

SO what exactly is "mishimoto"?

Why don't you buy some PG stickers from me so you can turn that turd into a gem?

[MissShiftS13]

I guess the car is nice..... for a car that looks like something straight out of a need for speed game. Anyways every1 has their own taste. And why is it that all these american car shows always have these type of fast and furious cars.... still waiting for tuners that will look for clean sleek performance and not bright flashy over horrendous aero crap, that is more than likely not aero at all.

[ROUGE180]

I <3 ZILVIA ... Makes you feel all warm inside lol Not my personal style but cool car.

[fastfuriousnissan]

http://www.tunerzine.com/view_coverage/show_coverage/sema-2008-day-1

[BillWatcher]

I guess the car is nice..... for a car that looks like something straight out of a need for speed game. Anyways every1 has their own taste. And why is it that all these american car shows always have these type of fast and furious cars.... still waiting for tuners that will look for clean sleek performance and not bright flashy over horrendous aero crap, that is more than likely not aero at all.


You really think Americans are the only ones with that? :newbie:

[GabeS14]

I guess Mines, and Jun are also very gay tuner companies because they build their cars for sema and other car shows and all the racer kids love them..

good work on the car, i hate bright orange and dont like the wheels but would love to see the car in action!

[cfrost]

dang you guys are critical

saw the sema pics on your site, I think it looks great. sweet motor setup too

[Ceepo]

Its okay, not my color choice, but i would drive it :) ha ha ha...

[drftwerks]

i want to see the models naked.
.
.
.
.
.
.
.
no wait
i want to see rj naked
.
.
.
.
.
.
.
wait
wat?!?!

[ixfxi]

my car rocks this thing, and it doesnt even run........... yet

[J ROK]

thats a nice kit

[Om1kron]

my car rocks this thing, and it doesnt even run........... yet

If you were an organism, penis would be your first name, vagina your last and your function on this planet would be a creature that randomly reproduces offspring asexually and then hibernates said offspring within itself, then kills it only to attempt re-production again, and again, and again...

That's a short description to describe how full of yourself you are.

[ixfxi]

If you were an organism, penis would be your first name, vagina your last and your function on this planet would be a creature that randomly reproduces offspring asexually and then hibernates said offspring within itself, then kills it only to attempt re-production again, and again, and again...

That's a short description to describe how full of yourself you are.

this may be true

but my car still rocks this thing, and it rocks yours too :)

[Om1kron]

this may be true

but my car still rocks this thing, and it rocks yours too :)

only because yours is painted will I give you a pass.

[ixfxi]

only because yours is painted will I give you a pass.

your car is turning out pretty good though. i dont like viewing your build thread because i hate looking at your face. it makes me think that vin diesel bought a 240. your car though is OK.. i cant badmouth it. at least you're doing your share of wiring work, which most people neglect.

this pumpkin colored thing is ok. it lacks personality and doesnt have any unique parts on it. i cant understand how the builder bought high-end parts with cheap parts. the wheels are the worst part of the car, 19's just have no business on a 240. and what are they, 19x7,8,9??? you dont go widebody to run wheels that can fit on a fwd car.

even me, who is a complete fuck face, is running a 17x10 f/r.

if the owner plans on really putting down some serious power, he's going to need something much stickier than those toyo t1r's. the owner should know better than that, if he has any sense in that head of his. unless its a female, then everything makes sense.

[Om1kron]

haha! gosh even if I put on weight the vin diesel references will never die... at least I don't get "aj from the backstreet boys" or "mike bibby" anymore.

[unlegendary]

show cars are cool.

but arn't they supposed to look good?

LOL. msg length

[nightshiftgarage]

Speaking of high horse power SR's... What the hell happened to Rhombus??? I figured his car was ganna set some records..(668whp519ft/lbs)last i heard

rhombus, eric, is a good friend of mine. hes out of s chassis now. hes driving a mk3 supra, with built 2j running the new 3bt67 from comp turbo. super fun car. ive rode in it many times.haha i ve have some of his old stuff that was on that t66 setup back in the day. lol he helped me assemble some of my sr too.

this car reminds me of other doo doo lookin cars like the turd wax car

[420sx]

it just looks like you guys threw a bunch of stuff together not giving it much thought.

the wheels make the car. get rid of those and get something nice.

and nothing is cool about j-spec nowadays. now if you were running a bunch of moroso parts, SLP loudmouth with straight pipe, i would applaud you for being right on the next fad. but unfortunately, you have failed at that. maybe it is something you should do with your next car.

now my next question. did you build this car for yourself or to take it to shows. are you really planning on tuning it for power and then drifting it? makes little sense

800 hp on that setup? GET REAL

[Brian]

The car looked good out there on the track last weekend.

sick.

[ESmorz]

My car looks better than that and, it's basically stock...

At least I have a reason for sunken wheels.

[ThunderbaySr20]

the ironic thing is, since this was posted (the pics) you realise that moshimoto hasnt posted?

anyone else notice the massive amount of wiring that still needs to be tucked and hidden, or the bright silver washer holding the grill on?

[cc4usmc]

the ironic thing is, since this was posted (the pics) you realise that moshimoto hasnt posted?

Yeah they have....

Unless you're referring to the pics on the previous page. In that case you need to be more specific.

[ayuaddict]

My car looks better than that and, it's basically stock...

At least I have a reason for sunken wheels.

i personally enjoyed viewing your "Violent Jogging crew" sig more than your current "violent rabid tacos".

i would appreciate it if you changed it back.

thank you.

[blownmotor]

If their product is garbage then what kind of car do you think they will build?

[ESmorz]

i personally enjoyed viewing your "Violent Jogging crew" sig more than your current "violent rabid tacos".

i would appreciate it if you changed it back.

thank you.

Ah shutcha mouf

:hide:

[chris300zr]

Hello,

We wanted to give you a sneak peek at the Mishimoto S13.

Car is a Jspec S13. We heard someone posted the 'Highest Horsepower SR' on this forum. Look out - Dyno charts coming soon to top that.

Mod list is as follows:

Engine:

SR20DET Engine
BC Stroker Kit
BC Springs
BC Retainers
JE Pistons
Cometic Head Gaskets
ARP Head Studs
Total Seal Rings
Clevitte Bearings
Turbonetics GTK-650 Turbo
Artisan Tubular Manifold
Artisan Polished Intake Manifold
Deatchwerks 810cc Injectors
Mishimoto Intercooler
Mishimoto Intercooler Piping
Mishimoto Radiator
Mishimoto Transmission Cooler
Mishiomto Oil Cooler
Mishimoto Fan Shroud and Fans
Mishimoto Oil Catch Can
Mishimoto Radiator Cooling Plate
Artisan VBan Clamps
Artisan Cat Back Race Exhaust
AMSOIL 0w-30 Synthetic Oil
AMSOIL Oil Filter
AMSOIL Antifreeze
NOS Nitrous Kit with Intercooler Sprayer
HKS Cam Gears
HKS Fuel Rail
AEM EMS
AEM Digital Ignition System
Tomei Throttle Body
Tial Wastegate
Tial Blow Off Valve

Suspension and Brakes:

Tein Coilovers
Z32 Brakes w/ Upgraded Rotors and Pads
Reinforced Lower and Upper Suspension
5 Lug Conversion

Wheels and tires:

Konig Wheels
Toyo Tires T1R 235/35ZR19 Front
Toyo Tires T1R 265/30ZR19 Rear

Interior:

AutoPower 6 point Roll Cage
Removed back seat
Aluminum Door Panels
Carbon Dash
AEM Gauges
K-Sport Hydraulic E-Brake
Sparco Circuit Pro Seats
Sparco Harnesses
Sparco Steering Wheel

Exterior:

BASF R-M Mishimoto Orange Paint
BASF R-M Black Paint
ITZ-USA Body Kit
Origin 50mm Rear Fenders
Origin 40mm Front Fenders
APR Carbon Wing
Seibon Carbon Hood
TCS Carbon Mirrors

Transmission:

Competition Clutch Twin Disk Clutch
Competition Clutch Aluminum Flywheel
Kaaz 2 Way Limited Slip Differential
Reinforced Drive Shafts


Car will be in Chandler, AZ for HIN this weekend for a drift demo and at SEMA in the Mishimoto booth. Enjoy :D

http://yhst-62631657248580.us-dc1-edit.store.yahoo.net/I/yhst-62631657248580_2024_107879489

http://turbochargers.com/gallery/d/32581-1/IMG_5368.JPG

http://yhst-62631657248580.us-dc1-edit.store.yahoo.net/I/yhst-62631657248580_2024_107678175



ironically, this car's body work was done at the same shop around the same time as mine.


some pics for proof:
http://i430.photobucket.com/albums/qq26/mr_stabby/s13-4/DSC00010.jpg
http://i430.photobucket.com/albums/qq26/mr_stabby/s13-4/DSC00011.jpg


my car is the green s13 in the background.

[J ROK]

just from the last pic, your car is way better then OP's.

[Blacksilvy]

F&F Tokyo Drift Paint scheme?

In any case nice car, id wait for the numbers before after test n tune before claiming highest HP SR20det though.

[ByeByeSti]

we may have some competitors for this in new england within the next year or sooo ;)

[ixfxi]

ironically, this car's body work was done at the same shop around the same time as mine. my car is the green s13 in the background.

how is the shops paint & body work? from some of the close up pics i saw of the yellow car, i noticed that the rear fenders were painted over and partially molded. looks like a shitty job that wont last long.

[BustedS13]

ironically, this car's body work was done at the same shop around the same time as mine.

it's like raaaaaaiiiinnnnnn

[mishimoto]

I had a chance to see your car when I came down for a weekend. Nice ride!


ironically, this car's body work was done at the same shop around the same time as mine.


some pics for proof:
http://i430.photobucket.com/albums/qq26/mr_stabby/s13-4/DSC00010.jpg
http://i430.photobucket.com/albums/qq26/mr_stabby/s13-4/DSC00011.jpg


my car is the green s13 in the background.

[landins13]

I'm not sure what the other post claimed...but if I remember correctly it was in the 670 range. We're expecting well over that.

mazworx drag racing s15 makes 1500whp with an sr.

still love mishimoto im rocking radiator on my s13 and mishimoto intercoolers on my mk4 jetta and i got my friends to run them on an audi a4 and a boosted h22 accord.

so much hate..... tisk tisk tisk, if every person in here who is talking shit had the money to put into a car that you guys have in this, it would have some 18x12 volks +0 offset, a body kit, megan coilovers all the way down a 20k paint job and a ka with 300,000 miles.

and they would bitch about scraping when they pull in their driveway.

i wish i had the engine he put in that car with or without the chrome shiny pieces. nice build.

[mishimoto]

Thanks. Everyone is entitled to their opinion. We try to focus on the positives :) If you are interested in seeing this car in person, it will be at the HIN LA show on March 14th, along with our Evo X.

Also, if anyone was wondering about HP, we made 560+ on pump gas.

[projectRDM]

I love that last pic. Where the washer bottle which is clearly not needed anymore is still there, covered in orange paint. And the sidemarker socket and bulb dangling down, also covered in orange paint.

Did Maaco paint it?

[zugoi]

haha russ is hilarious. The sneak peak of the green s13 in the back looks better.

[ixfxi]

I love that last pic. Where the washer bottle which is clearly not needed anymore is still there, covered in orange paint. And the sidemarker socket and bulb dangling down, also covered in orange paint.

Did Maaco paint it?

nah russ, thats called attention to detail......... D0000000000D.

I guess in the grand-scheme of things it doesnt matter. The car is going to HIN.

I fucking hate HIN. I've done a SHITLOAD of HIN cars this year, which is good for me, but man.. these guys bring their cars to my shop and I see SO many mistakes: molded body panels, electrical components dangling and connected with butt-connectors, loom everywhere. Fucking mess...

Personally, I dont care how much HP this car makes.. its the overall execution that matters.

[projectRDM]

nah russ, thats called attention to detail......... D0000000000D.

I guess in the grand-scheme of things it doesnt matter. The car is going to HIN.

I fucking hate HIN. I've done a SHITLOAD of HIN cars this year, which is good for me, but man.. these guys bring their cars to my shop and I see SO many mistakes: molded body panels, electrical components dangling and connected with butt-connectors, loom everywhere. Fucking mess...

Personally, I dont care how much HP this car makes.. its the overall execution that matters.

Shit, I forgot. Painting the bulbs orange makes them shine correctly in clear housings. Of course a thick coat of paint doesn't allow any light output at all, but shit it looks good.

As far as HIN, shame the places don't burn to the ground. With everyone and everything still inside.

[JonGu]

nah russ, thats called attention to detail......... D0000000000D.

I guess in the grand-scheme of things it doesnt matter. The car is going to HIN.

I fucking hate HIN. I've done a SHITLOAD of HIN cars this year, which is good for me, but man.. these guys bring their cars to my shop and I see SO many mistakes: molded body panels, electrical components dangling and connected with butt-connectors, loom everywhere. Fucking mess...

Personally, I dont care how much HP this car makes.. its the overall execution that matters.

The orange car has been to your shop?

[mishimoto]

Dyno video:

YouTube - Mishimoto Silvia (http://www.youtube.com/watch?v=18TzSJ5DcA0)

[wgJoY]

ooooo la la

[Om1kron]

Dyno video: 18TzSJ5DcA0

OK your use of parts is quite silly, but I cannot deny the motor is solid.

[ixfxi]

Dyno video:

YouTube - Mishimoto Silvia (http://www.youtube.com/watch?v=18TzSJ5DcA0)

awww yeah, i feel like nostradamus - the bragging rights video has beeneth posted!

BOOYOW! behold & witness the awesome power of the 566HP fiberglass pumpkin, bitches!



haha i love show cars. seriously................ nice work mishimoto guys.

[mishimoto]

If their product is garbage then what kind of car do you think they will build?

Tell that to all of the Formula D, time attack and rally drivers running Mishimoto. As stated earlier, everyone is entitled to their opinion, but when you sound like an idiot, I can't help but interject. :-)

[projectRDM]

Tell that to all of the Formula D, time attack and rally drivers running Mishimoto. As stated earlier, everyone is entitled to their opinion, but when you sound like an idiot, I can't help but interject. :-)

Time attack and rally are one thing, but Formula D is just plain ghey. Sorry to all the drift morons but any company who advocates and supports drifting gets a thumbs down in my book. It is by far the stupidest sport ever created.

[ixfxi]

Time attack and rally are one thing, but Formula D is just plain ghey. Sorry to all the drift morons but any company who advocates and supports drifting gets a thumbs down in my book. It is by far the stupidest sport ever created.

I support....... Formula D, Russ.

:-(


I also support........(gasp)................H
.............I
.............N

haha

[projectRDM]

I support....... Formula D, Russ.

:-(


I also support........(gasp)................H
.............I
.............N

haha

It's cool. I can't afford your shit anyway. Especially when some kid would steal it the day after I put it on.

[ixfxi]

It's cool. I can't afford your shit anyway. Especially when some kid would steal it the day after I put it on.

when did you move to compton, son?

i thought GA was a nice place to live, whats all that i hear about country hospitality? everyone was so nice at the kansas city meet back in what, 2001? (notice how everyone from LA thinks that everything OUT of LA is considered "country"). :-)

[Yuda]

i thought LA was just a big fuckin suburb. are there any tall buildings? i run mishi rad on my sr. some people cant stop sweetin over established companies. nice build. im seriously sick of the orange and black though.

[karl wasabi]

The car looks pretty good. Orange is kinda silly. The wheels are a definite no, but the motor does look solid. I like how the car looks at the end of the dyno video. You guys should do that... =)