Supercharged KA24E

[satty07]

ITEM: Supercharged KA24ER.
PRICE: Price Drop!!! 2500 SHIPPED OBO w/ 5speed swap, 2000 SHIPPED OBO for engine all accessories and wiring harness/chipped ecu.
SHIPPING: Not really preferred, but I suppose If you pony up the cash.
DESCRIPTION: My custom supercharged KA24. Rebuilt 2k ago, using full felpro gasket set, topline rings, clevite bearings. Based around an Eaton M62 supercharger. Chipped ecu, 315cc Injectors, stock maf. Should be around 200 to the wheels. Runs like a champ, feel free to compression test it. Ran it against a stock sr with sidemount and stock boost, and it was dead even, I just had a hair off the line (gotta love the no lag). Currently running 4-5 lbs (hard to tell, the gauge is hard to decipher), controlled by the stock BPV, but can run 10psi with no pulley change. SR power for less than half the price.
*PIC: Here it is, on the old motor. The fresh motor looks the same, just ALOT cleaner. http://i51.photobucket.com/albums/f371/satty_07/0616082056.jpgLocated in Carol Stream, IL or Omro, WI. Will deliver if its not absurdly far away if you pay for the gas. Will ship if the buyer pays. This is currently running in my daily driver, and will be pulled when someone purchases it.

[scoobyjoe]

oh shit........wow!!!!!!

[satty07]

Forgot to add that I am open to trades for suspension, wheels, aero, vh45 swap stuff, etc. lmk

[LongGrain]

does this sale include my boost gauge?

i'll trade you your engine for a 100 pack of zip ties and a number 12 from mc'D's

[OperationSr20]

^^ I see your bid, and make it a LARGE #12!!!!

[brewster240]

you should mention that it doesnt work with p/s.

[mrpeepers]

y do poeple only seem to supercharge the single cam?

[projectb13]

that is fucking sweet .

[92nx2k2]

Bravo!!! Bravo!!!

[satty07]

Yea, you wont have powersteering unless you relocate it, i was going to do that but then I realized that it wasnt worth it. Ive been dailying it with out ps for along time now, its really not that bad, Ive even driven at a couple events. It would be an easy job to add it tho using a custom bracket to mount the ps pump where the de's have it.

Oh and people only supercharge the single cam? right....do some research buddy. this is a trillion times rarer than a turboed single cam. In fact, my setup is the only one setup this way that I know of, but If theres so many others, id love to see em.

[asiandude15]

Thats the first SOHC supecharged I've ever seen... Nice GL with sale

[cronux]

i think he was implying that no one supercharges the DE,

although this is the first time i've seen a supercharged E.

in wisconsin, no less.

sexy as hell.

[wangan_cruiser]

ive seen ka24et


but glws

[MrChow]

That's really cool. Did you ever dyno it?? Also just out of curiosity how was your MPG??

GLWS

[WISH ONE]

im feelin it! i wonder how this would do at the track!.... ever track it?

[HS13KLS]

ill bump for this guy, it ran well when i drove it a few weeks back. the motor is pretty nice.

[satty07]

Never dynoed, but im still getting about 27-28mpg with regular driving. Id guess around 200-210hp. I just got ahold of some 460cc injectors so I will be cranking up the boost this weekend before the event on sunday, so we will see how that goes.So yea I have tracked it, ive taken it to a few events, its got plenty of power, the torque down low is really nice. Ive bounced this thing off the revlimiter all day long with not one single problem, shell take whatever you can dish out.

[mrpeepers]

i think he was implying that no one supercharges the DE,

although this is the first time i've seen a supercharged E.

in wisconsin, no less.

sexy as hell.

haha yea thats what i meant. No offense OP. I think i have seen a superharged E b4

[satty07]

Alright gotcha. Its hard to sense what people mean online sometimes you know. And actually, there is a kit out for the de's, its made by thomas knight, look it up. Its expensive tho, the kit alone costs more then my whole setup.

[mrpeepers]

oo really thanks! but i also know what u mean about e-sarcasm. Unfortunately zilvia is abound with negativity

[nrmskate]

YouTube - 1990 240SX SUPERCHARGED KA24E (http://www.youtube.com/watch?v=3rik0ywv1UM)

[satty07]

Yea ive seen that before, but thats nothing like my setup. That guy has his remote mounted, which kinda negates the whole purpose of a roots blower, the immediate throttle response of having it directly located on/part of the intake manifold. He has it before the throttle plate, which is not how they are designed to work, and that blower iirc is a m45 which is waayyy too small for a ka.

[Oo_Skyline_oO]

oooooooooooo ooooooooooooo ooooooooo TWIN CHARGE THAT BITCH!!!!!!!!

[satty07]

Actually, I have a turbo manifold for it, I was planning on doing that, I am willing to sell that as well, but im really lookin just to sell the whole setup to do a vh45 swap this winter.

[fromxtor]

http://zilvia.net/f/sale-items/179309-supercharged-ka24de-dynod-track-proven.html
New supercharger kit for KA24DE w/ install writeup - NissanForums.com :: Nissan Forum (http://www.nissanforums.com/general-240sx-silvia-s12-200sx/124787-new-supercharger-kit-ka24de-w-install.html)

Plenty of supercharged DEs

[nrmskate]

This aint a DE bub.

If you read, its a E.

[SAKURA]

satty, where did you get the intake mani made?
i still want to s/c my SOHC, but i am finding it difficult to get much useful information from ka-t.
pm me so you dont get locked for bumping

[fromxtor]

This aint a DE bub.

If you read, its a E.


I know it's a KAE Nick, remember I had the fully built single cam that you were going to buy the manifold off me?
http://i3.photobucket.com/albums/y81/fromxtor/100_0404.jpg

Anyway I was replying to the individual who said he had never seen a SCd DE.

BUMP for FI on a single slammer!

[nrmskate]

Oh, my bad dude.

Haha, hows the KAE-T goin bro?

"Free bump"

[LongGrain]

i'm going to bump this

[satty07]

satty, where did you get the intake mani made?
i still want to s/c my SOHC, but i am finding it difficult to get much useful information from ka-t.
pm me so you dont get locked for bumping

The intake manifold is stock, with a 1/2 in aluminum adapter to bolt the supercharger too? Locked for bumping? providing useful information to buyers is something I cant imagine it get locked for.

[LongGrain]

yea you havent bumped at all yet, you are good...

[fromxtor]

Seriously ppl don't sleep on the single cam, the guy who bought my single cam just dyno'd right under 300whp w/ a rough tune. This would be perfect for both grip and drift for instant power.

These are the spec of my old motor:
'90 KA24E
bored .040 over
Ross racing pistons (30 psi rated, 8:5:1)
polished rods w/ ARP bolts
ARP HS
3 angle valve job
rebuilt oem valvetrain
mild port and polish
clevite bearings
polished crank
Oem rebuild kit
new oil pump
timing setup
water pump
freeze plugs
Z32 fuel filter
oem oil filter

YouTube - SOHC Turbo S13 (http://www.youtube.com/watch?v=MfBpo_iG13k)

[SAKURA]

satty, thanks. where do you get that adapter made? also, it looks like you took off the ECCS housing thing, correct? i dont see where the supercharger blows into the intake manifold. i understand that the m62 blows out through the bottom though.

how much would you take just for the engine and s/c? no tranny, harnesses or ecu.
as for shipping, i live in vegas.

[satty07]

With shipping, looks like about 2500. Yes, I removed the upper intake manifold, and I custom made the adapter plate. It blows through the plate and into the lower intake manifold. LMK

[fromxtor]

Sakura I would buy the ECU also, as it's got a good tune in it already.

[satty07]

Yea, the engine runs great with the tune, just a lil rich at idle but I havent gotten around to retuning again yet. Ill also include some 440cc injectors in the deal that I just picked up.

[satty07]

Anyone? im a little flexible on the pricing so lmk.

[satty07]

Alright, i need some money and in a hurry so im dropping the price to 2k shipped engine and wiring/acc, and 2500 shipped with the trans and everything. Buy it!

[satty07]

bump...nobody?

[racerx2k1]

Forgot to add that I am open to trades for suspension, wheels, aero, vh45 swap stuff, etc. lmk

Anyone? im a little flexible on the pricing so lmk.

Alright, i need some money and in a hurry so im dropping the price to 2k shipped engine and wiring/acc, and 2500 shipped with the trans and everything. Buy it!

bump...nobody?

2 bump limit. You can start new thread in 2 days.