SAFC-Z32 MAF problems....

[OKR_240SX]

I did a search for my problem.. didn't get anything ( if you find it, link and I'll stop the thread )

With my rb20, when I add in with the Z32 maf (2 in 4 out) with the SAFC the motor runs either like completely crap, is completely hesitate under small boost (like the sparks plugs are done), or it just doesn't idle at all. Right now I'm using 1 in 1 out.. and it runs recent.... I've gone thru the wiring of the maf 3 times and nothing is wrong, same as the SAFC... So I'm lost.. Any ideas??

[cotbu]

I don't know your setup but, check your ecu see if it's been chipped(tuned). Check the wiring for the z32 mafs. Then check the voltage for the z32 mafs.

I'm thinking your ecu may have been tuned. You could try those settings, then verify if it's true later
Did the engine run right, with the stock mafs?