FS: Parting Out Ka24DE!!

[Neemo6]

Im parting out my ka24de, everything came out of the car in great working order, i just installed a sr20det and now need to make room im my garage so i need to get rid of this stuff. Everything came off working great and 92,868 miles on it. I got everything you need for your ka24de, from injectors, to crankshaft, fuel pump, 5speed tranny, flywheel, ecu, basically everything that i took out when i did my sr swap is for sale, so let me know what you need and make an offer, no reasonable offer will be refused.

[Kreator]

What year is it? I might need an fpr if it's an s14 or cams if it's 91-92... Also, how much for the tranny and where are you located?

[Neemo6]

The vehicle is a 92 s13 and im located in South Bend, In and im asking for $60 plus shipping on the cams, tranny im asking for $250 plus shipping. let me know...

[LanceS13]

how much for the flywheel?

[Neemo6]

$30 + shipping for the flywheel..

[Ae86inspired]

how much for the harness?

[Neemo6]

The wire harness was the first thing that got sold, but i might be coming accros one pretty soon ill let you know or ill post it up.

[mixedwell]

hey how much is the knock sensor and the speedsensor? while ur at it how much for the EGR valve? heheh lots of stuff.

holla at me


mixedwell ;)

[midnights14]

Tranny still for sale? I want to do a 5 spd swap soon...let me know if you can include all the stuff needed for the swap...thanks!

[email protected]

[Joe_M]

I need the IAA assembly with the fast idle valve and also the air regulator. Let me know what you want for it.

Joe

[Neemo6]

(hey how much is the knock sensor and the speedsensor? while ur at it how much for the EGR valve? heheh lots of stuff.)

The speed sensor was used for my swap but if you still want the knock sensor and egr valve give me $30 plus shipping for the two.

[Neemo6]

I still do have the tranny but the only thing i can supply for the 5speed conversion is the flywheel the rest i still in used for my car sorry. $250 plus shipping on the tranny

[JRTurbo909]

how much for the Throttle body? email me .... [email protected]

[konseiEva]

selling the ignition coil? how much?

[Nerfdude]

how much for the distributor? whole thing, with the module and cap etc..?

[Neemo6]

Sorry for not answering your questions i was in vacation in Mex,Just came back a couple of days ago but if you guys still need anything i still got everything.

[Neemo6]

Items that are still for sale;

5sp tranny $200+shipping
complete Distributor assembly $40+shipping
igniton coil with igniton module $20+shipping
ecu $60+shipping
Uncut clean wire harness $100+ship
injectors individually sold for $10 +shipping
camshafts $45 for both +ship
complete lower block with pistons crank etc. 300+shipping
tps sensor $15 free shipping

just let me know what you need;

[d240t2]

For whoever asked about the EGR...I have an S13 and S14 complete EGR setup for sale if someone wants it...$25+shipping sound good?

Also, the S13 and S14 FPRs are interchangeable (but slightly different)...but I have an S14 FPR sitting around I can let go for $25+shipping. It is off the 20K mile motor I bought over a year ago...just had it sitting around. email if interested, [email protected]

Dennis

[95Blue240sx]

how much for the little air temp sensor that goes on the air box?

[Neemo6]

Im not quite sure were the air temp sensor goes on my 92 model the only thing i see by the intake system is my maf if you can direct me to the exact location where it goes i would be glad to give you a price on it im not quite familiar with the Ka's

[Neemo6]

for whoever wants the EGR $20+shipping

[BadMoJo]

where you at man?


I want those cams.

[Neemo6]

Sorry but the cams have been sold.

[BadMoJo]

:mad: