PDA

View Full Version : Thinking of parting out 240sx, lots of aftermarket stuff!!!


foolishdrift
09-29-2008, 09:01 PM
Well I posted my car for sale a few days ago but due to lots of interest I'm thinking about parting it out, if I get enough people committed to buy stuff then ill begin the part out... heres a list of all the parts available (stock parts not listed but all those would be up for grabs as well) also chassis would be avaliable.

Engine swap:

~240whp Red top SR20DET (stock boost, extremely reliable with built bottom end)
Eagle H-Beam Forged Rods
JE Forged Pistons (8.5:1 compression)
JE rings
Cometic head gasket
Greddy RAS
ARP head studs
ARP rod bolts
ARP crankshaft bolts
Nismo rod bearings and Clevite 77 crankshaft bearings
Balanced, honed, and sleeved at local performance machine shop
Nismo thermostat
exedy stage 1 clutch
Tomei short throw shifter
ALL other parts have been replaced with new OEM products (oil pump, water pump, etc.)
Stock T-25 turbo (7psi)
Around 15,000 miles on the engine since rebuild
(engine will be sold as a complete swap including the ecu, modified wiring harness, trans, etc... not willing to completly disassemble the engine to much interest in the whole thing)
Ill also include a good set of stock pistons/rods, old t-25 turbo, SSA outlet pipe etc... - MAKE OFFER!

Suspension:

KTS coilovers - $650
PeakPerformance PRO inner tie rods and KTS outer tie rods - $200
Front strut tower bar - $25
Suspension techniques sway bars - $225
Rear subframe with SPL aluminum sub frame bushings installed - $150... held for Mark
Autopower 6 point roll cage - $...held for J

Wheels/Tires:

-Konig 15x7 rewinds (+0 offset) - $380... held for J
(Front) 205/50/15 Falken Azenis RT-615 (brand new)
(Rear) 205/50/15 Dunlop DZ101’s (aprox 50% left)
-Tenzo D6's 18x9.5 (+25 offset) - $600... held for Chico
No tires mounted (brand new wheels)
-Set of stock SE wheels two with hankook hrII's and the other with some junkyard tires - $100

Drivetrain:

ATS deftforce 2 way differential (I heard these are now discontinued, one of the best diffs for drifting ever built in my opinion) comes installed in pumpkin- $850

Miscellaneous:

Taylor battery relocation kit with kill switch - $110
Real *rare* Nismo Steering wheel w/ adapter- $175
Autometer oil pressure gauge w/ stainless line - $60
Apexi peak/hold boost gauge - $70
HKS fan controller - $100
Sparco Rev drivers side bucket seat - $350
Crow 5 point racing harness - $50
Nagisa Low Seat rail - $100
Authentic Origin aggressive body kit (damaged but repaired) - $400
Walbro 255 lph fuel pump - $60
Hybrid FMIC kit w/ Turbo XS BOV (small ding but no leaks) - $450
Koyo aluminum radiator w/ greddy cap - $225
JVCR 3" catback exhaust - $250
Downpipe 3" - $50... held for Mark
Resinator 3" - $25
Greddy style oil pan - $50

PM or email me if you want something or want pics of a certian part, serious buyers committed to buying contact me and ill put your name down.. Once I get a certain amount of parts sold/claimed then ill take everything apart and collect payments. Parts do not include shipping, also tack on 3% for paypal fee's if that's your method of payment. Pick up is encouraged, I live in livonia, MI 48152.

general pics of the car can be seen at Project A Spec - Team Driver (http://projectaspec.com/07teamphotos/ryan.html)

email - [email protected]

njd07
09-29-2008, 09:07 PM
240whp @ 7psi on a t25...I call bs lol

monkz2332
09-29-2008, 09:09 PM
pics of coilovers?

Markdawg20
09-29-2008, 09:28 PM
This is an S13? I 100% want that rear subframe w/ bushings. Ill Pm you though.

happy408
09-29-2008, 09:42 PM
pictures of the strut tower bar?

foolishdrift
09-29-2008, 10:27 PM
Ill get pics of the coil's and strut tower bar tomorrow.

ndj07- lol Your right the 240whp number is probably off, hence the ~ (aprox) its never been on a dyno so its anyone's guess maybe closer to 230 or whatever they norm make around those levels, make a judgment call and est. Hell buy it throw on a T67 and go to town :bigok: , or just max out the t25 the engine is more than capable enough to handle it(with some fuel mods that is).

goldee240
09-29-2008, 10:57 PM
pic of koyo & coils pm me back

Teddy
09-30-2008, 12:06 AM
Nagisa rails are driver or passenger?

MrChow
09-30-2008, 01:43 AM
Resinator 3" - $25

Can I get a pic of it plz?

wickedjester
09-30-2008, 02:07 AM
pics of the tie rods and approx mileage

pm me please

jceezzer
09-30-2008, 06:30 AM
S13 coilovers?

murda-c
09-30-2008, 06:33 AM
It's an S13 guys

foolishdrift
09-30-2008, 11:23 AM
I forgot to mention all the parts are for an s13 (1992 240sx hatch, for those looking for specific stock parts not listed).

S13Teddy : The Nagisa rail is for the drivers side

wickedjester: The tie rods have approx 15,000 miles on them, installed right around the same time the engine was built.

Everyone else pics of all the parts are on there way, I'll post them up later today once I get home.

foolishdrift
09-30-2008, 06:07 PM
Heres some pics as promised ... it started to down pour pretty bad so some of the pics aren't that great or detailed (didnt take off the wheels etc...) If you would like pics of other parts or better pics than the ones posted the just post up or PM me.

As you can see there is a bit of surface rust on the inner tie rods and coilovers, its only cosmetic (the coils and tie rods still adjust with no problems at all) but ill clean them up nice and good before I send them out or you pick them up.

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00954.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00956.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00958.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00980.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00949.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00950.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00985.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00987.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00979.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00974.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00981.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00959.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00960.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00961.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00963.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00966.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/240sx%20pics/DSC00968.jpg

brndck
09-30-2008, 07:37 PM
holy crap! i have that same nismo steering wheel! you're the only other person i've seen who has one. free bump i guess.

foolishdrift
09-30-2008, 08:15 PM
Thanks man, yeah they are extremely rare to come by. I've only seen a few others floating around myself.

DrftKingIII
09-30-2008, 09:26 PM
PIcs of the Tenzo D6's? ANd how much will shipping for the seat to 63132 be?

foolishdrift
09-30-2008, 09:36 PM
http://i66.photobucket.com/albums/h262/foolishdrift/tenzo/DSC00944.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/tenzo/DSC00943.jpg

http://i66.photobucket.com/albums/h262/foolishdrift/tenzo/DSC00945.jpg

I'll get you a shipping quote tomorrow on the seat.

jceezzer
10-01-2008, 08:43 AM
Coilovers shipped to 23462

EchoOfSilence
10-01-2008, 11:14 AM
how much for the t25

phishtank
10-01-2008, 11:30 AM
Is the orgin body kit for the coupe or hatch...and also is it for an s13 front end or the usdm front end. If it will fit on my USDM coupe then ill take it. Would also like pics.

Slow Poke
10-01-2008, 02:18 PM
It's for a USDM hatch!
http://projectaspec.com/08team/ryan/DSC05189.JPG

Slow Poke
10-01-2008, 02:20 PM
Great Deals BTW

foolishdrift
10-01-2008, 02:51 PM
Slow Poke - Thanks man.

EchoOfSilence - Sorry all the engine stuff is sticking together for now.

jceezzer - Shipping would be $40 to you.

All PM's have been replied to.

MrChow
10-03-2008, 05:07 PM
are you willing to part out the Tomei short throw shifter??

foolishdrift
10-03-2008, 09:08 PM
Sorry that's sticking with the engine swap for now. If the engine doesn't sell after a while I'll consider parting it out.

To keep you guys updated, I'm starting to tear apart the car this weekend. Ill be contacting those who are having parts held after I remove what your interested in.

ranger2339
10-03-2008, 10:23 PM
I need your ebrake set up, everything from the handle back, bolts and brakets to please?

If so how much.

Josh

240kidd
10-04-2008, 12:06 AM
how much for steering wheel to 55438??

aceof07
10-04-2008, 03:29 AM
sway bars shipped to 28223?

foolishdrift
10-04-2008, 10:27 AM
Everyone has been replied to via PM's.

Mamba
10-05-2008, 09:31 AM
did the subframe ever sell?

foolishdrift
10-07-2008, 07:20 PM
im still holding for the guy in OH, havent had a chance to remove it for him yet...


Whats been sold so far....

HKS fan controller
Freddy oil pan
Sparco seat
Sus. tech sway bars

Everything else is still up for grabs besides whats being held

HS13KLS
10-07-2008, 08:39 PM
bump for a midwest guy!

foolishdrift
10-11-2008, 09:22 PM
The konig wheels and roll cage were picked up today. I'm pulling the engine tomorrow, anyone who is interested let me know.

foolishdrift
10-12-2008, 10:16 PM
Crow 5pt harness is sold!

foolishdrift
10-13-2008, 10:32 PM
Heres a break down of what I'm looking to get for the swap...

Built engine and trans, ecu, modified harness, maf, ignitor chip and other things that norm. come when you buy a swap... $3000 or $3400 installed

Full swap (turn key setup)... comes with everything listed above + battery relocation with battery, walbro fuel pump, FMIC with bov, JVTR catback exhaust, downpipe, resoniator, koyo rad for sr with greddy cap, and altima dual electric fans..... $4000 or $4500 installed

Both these still come with all the other stock parts that I have lying around, good pistons, rods, old t25 turbo etc...

This is a hell of a deal boys so jump on it while you can!

foolishdrift
10-16-2008, 08:30 PM
I MIGHT consider parting out the engine now as well if i can get some buyers for the major parts, ie pistons, rods, etc.... Let me know if theres any interest in me parting out the engine.

King_David
10-16-2008, 10:01 PM
would u be willin 2 trade your engine swap 4 a '92 lude or r u jus lookin 4 $

foolishdrift
10-17-2008, 10:06 AM
Sorry just looking for money, no trades at the moment.

racerx2k1
10-17-2008, 02:38 PM
Thanks man, yeah they are extremely rare to come by. I've only seen a few others floating around myself.

Everyone has been replied to via PM's.

The konig wheels and roll cage were picked up today. I'm pulling the engine tomorrow, anyone who is interested let me know.

Crow 5pt harness is sold!

Heres a break down of what I'm looking to get for the swap...

Built engine and trans, ecu, modified harness, maf, ignitor chip and other things that norm. come when you buy a swap... $3000 or $3400 installed

Full swap (turn key setup)... comes with everything listed above + battery relocation with battery, walbro fuel pump, FMIC with bov, JVTR catback exhaust, downpipe, resoniator, koyo rad for sr with greddy cap, and altima dual electric fans..... $4000 or $4500 installed

Both these still come with all the other stock parts that I have lying around, good pistons, rods, old t25 turbo etc...

This is a hell of a deal boys so jump on it while you can!

I MIGHT consider parting out the engine now as well if i can get some buyers for the major parts, ie pistons, rods, etc.... Let me know if theres any interest in me parting out the engine.

2 bump limit. You can start new thread in 2 days.