BinaryVertigo
01-18-2003, 08:51 PM
new RevHard cast iron manifold for KA24DE motors - $350 shipped.
for the sake of the board's bandwidth, please contact me via email at [email protected] for any questions
The manifold is brand new, never used. I originally bought it for the turbo kit I am piecing together, but it looks like I'm going to have a friend fab me an equal length manifold, so i won't be needing this piece. Take this off my hand for cheap! Sorry I don't have any pictures, you can go to the RH website to check it out if you aren't familiar with it. The manifold is cast iron with a flange for both T3 or T4 flanged turbos. An on center T4 turbo would fit great on this manifold with no clearance issues in the KA engine bay. As far as the rumored cracking issues, you can avoid that by separating the one piece flange between the runners and boreout the holes from the center out-wards starting from the 2 center bolts.
for the sake of the board's bandwidth, please contact me via email at [email protected] for any questions
The manifold is brand new, never used. I originally bought it for the turbo kit I am piecing together, but it looks like I'm going to have a friend fab me an equal length manifold, so i won't be needing this piece. Take this off my hand for cheap! Sorry I don't have any pictures, you can go to the RH website to check it out if you aren't familiar with it. The manifold is cast iron with a flange for both T3 or T4 flanged turbos. An on center T4 turbo would fit great on this manifold with no clearance issues in the KA engine bay. As far as the rumored cracking issues, you can avoid that by separating the one piece flange between the runners and boreout the holes from the center out-wards starting from the 2 center bolts.