my ka24de is running rich???please help

[josh_adnoh]

alright changed my injectors cause my code(fuel injection system) was on...well didn't do anything...when you put your hand in front of the exhaust you can feel the unburnt fuel??its not my maf,or the coolant temp sensor...im out of ideas...could it be some short or something in the wiring or my ecu???please help

[SexPanda]

Unplug the battery, let it chill for half an hour, plug it back in.

Resets the ECU, clears everything... Even your clock. Kinda sucks like that.

[mxexux]

alright changed my injectors cause my code(fuel injection system) was on...well didn't do anything...when you put your hand in front of the exhaust you can feel the unburnt fuel??its not my maf,or the coolant temp sensor...im out of ideas...could it be some short or something in the wiring or my ecu???please help

What exactly is the DTC you are getting? There is a very simple way to check your injectors electrically too. Using your DVOM just ohm each injector and they all should be within .1 ohms of each other.

[josh_adnoh]

What exactly is the DTC you are getting? There is a very simple way to check your injectors electrically too. Using your DVOM just ohm each injector and they all should be within .1 ohms of each other.

by DTC you mean my codes right???im getting (crank position sensor) and just sometimes i was getting (fuel injection system) and thats it...oh and il try the dvom and post the results...thx

[whyteboy]

i would check into your crank position sensor since you do have a code for it but check all grounds my ka24de was running rich as hell i changed maf coolant temp sensor. and nothing changed. my boss helped me out and we found a ground wire that was loose. solved my problem. ohm your injectors and check your fpr

[josh_adnoh]

checked the injectors getting 12 ohm on all injectors and how do i check my fpr?

[mxexux]

Well I wouldn't pay too much attention to the crank position sensor because it does nothing for engine control in our cars. Its actually only used to start the engine in less cranks. But help me out and post the exact DTC numbers that you are getting ( Pxxxx ). I have the factory manual and can point you in the right direction. Also, the fuel pressure regulator you can check with a vacuum gauge or check if its getting sufficient vacuum. If its not getting good vacuum it will definitely run richer.

[josh_adnoh]

im geting: Crank Position Sensor(OBD) EC-167 #82
and sometimes was getting: Fuel Injection System EC-157 #76

and if i would put sr injecters would it be richer?or it wouldnt do a difference??

[s13boy89]

it would run rich because the are more cc

[josh_adnoh]

ahh i thought that the ecu was controlling the fuel and it wouldn't do a difference if they where higher cc,s