PDA

View Full Version : AR FS: 32mm (1.25") Hub-Centric Spacers x 4

DriftHappy
09-20-2008, 08:19 PM
I'm selling my hub-centric spacers. I ran them on my FC for only about 5k miles. Like the title says I have all 4 and they are approx. 32mm, exactly 1.250" thick. Bolt pattern is 5x114.3 (5x4.5"). Thread pitch is 12x1.5mm. I paid about $200 for them new. I'm willing to separate them, I'll take $70 shipped for 2, or $125 shipped for all 4. Shipped prices are for the lower 48 states. Pm me for international quotes.

BTW: I know I dont have many post on here yet. For references, I am also "DriftHappy" on RX7Club and am "Antscollectibles" on eBay. I have over 380 feedback, 100% positive.

Thanks,
Anthony

http://img.photobucket.com/albums/v258/Awfernald/Parts/dscn3522.jpg
chris300zr
09-30-2008, 04:59 PM
pm'd you

msglngth
irritatedmax
10-01-2008, 12:56 PM
are these hub-centric to 240sx hubs? same question different wording, is the hub-centric ring diameter the same on 240's as fc's?
Shaminii
10-01-2008, 11:21 PM
Is the thread pitch the same as the thread pitch on 240 studs?
DriftHappy
10-06-2008, 03:10 PM
They are a large diameter center bore. I will measure it when I get home. Also the studs are 12x1.5 mm so you will have to change the studs or buy new lug nuts to adapt them.

*Update* - the center bore diameter is 82.5mm and accept hub centric spacers even though really not needed. They are very strong as lug-centric.