PDA

View Full Version : Lots of stuff for sale. 240sx/RB parts, gauges clutch etc..


Xracer
09-20-2008, 10:54 AM
Shit in my garage that i don't need.

1995 S14 KA24DE Engine harness Excellent condition $155shipped
***SOLD***

Hatch tail lights, good condtion, no cracks or anything. Lower trim piece included. $100 shipped
http://img301.imageshack.us/img301/838/p1010017rf7.jpg

Front and rear 4 lug hubs. All good, no noises, good studs. $20 a piece (80 for all 4)
http://img175.imageshack.us/img175/5798/p1010019jq2.jpg

OEM SR20DET cams, decent condition. $55 shipped for both

http://img222.imageshack.us/img222/7926/p1010022fd9.jpg

3inch stainless down pipe for SR20, new: $70shipped
http://img110.imageshack.us/img110/2528/p1010030yf9.jpg

Stock S13 steering wheel: $20shipped

http://img363.imageshack.us/img363/7472/p1010031yb8.jpg

New RB25DET/ Z32 ACT 6 puck disk
***SOLD***

1 boost gauges and 2 temp gauges. Both temp gauges come with all the nessesary fittings/sensors. They are slightly used but are in excellent condition. The color is the carbon face/white illumination/red needle. If you looked at these things before you know they are some pricey bitches.

http://img211.imageshack.us/img211/8255/072808225112pz7.jpg

Boost: $150shipped
Temp: $175 each shipped

Front EVO calipers. Sandblasted, ready for new paint.

http://img211.imageshack.us/img211/6684/080508004304gq8.jpg
$365 shipped

I also have 3" custom intercooler tubing made for an RB25DET equipped 240sx with stock intake manifold.
http://a826.ac-images.myspacecdn.com/images01/66/l_a72db5ae841bb1a1260d70b7509f8b11.jpg
$60, Add $200 if you want a brand new core with it.

And, well this thing. But most likely you cant afford it. If you think your ballin it me up.

http://img98.imageshack.us/img98/9430/p1010038fv5.jpg

gtprince
09-20-2008, 04:41 PM
by core do u mean intercooler as well?? and i'm assuming it will work on a rb20det. if so is that 200 shipped?

cc4usmc
09-20-2008, 05:02 PM
by core do u mean intercooler as well?? and i'm assuming it will work on a rb20det. if so is that 200 shipped?

DUDE. $60 for the piping, $200 for the core = $260. And I highly doubt he wont charge extra for shipping.

ch1873857
09-20-2008, 05:34 PM
pmed about intercooler setup. can anyone tell if the stock bov is on that pipe? forgot to ask

Xracer
09-20-2008, 05:46 PM
The inter cooler piping = 60. new core = $200
shipping on all that isn't going to be cheap since the parts are pretty big. MY guess would be about $50 to ship a core and the piping. and it SHOULD fit on an RB20. I dot see why it wouldn't, but im not 100% sure.

ch1873857
09-20-2008, 07:06 PM
hey man ill take the piping. pm me a price shipped and paypalled. and ill work on transferring funds.

Xracer
09-23-2008, 01:47 PM
Pm sent.

Everything still available.

spartanic
09-23-2008, 03:56 PM
Very nice car. Too bad its going out the door.

rivaracingrb25
09-25-2008, 03:27 AM
hey, will the hood still shut with the piping running over the top of the engine like that? im runin a seibon hood, but i might still be interested.kno where i can get an tps or idle control valve for my rb?

sittinsideways76
09-25-2008, 08:00 AM
how did you mount the evo calipers?

Xracer
09-25-2008, 10:15 AM
You will have to trim the hood in order to clear the crossover pipe. it sits slightly higher than the hood line. It looks cool when trimmed properly though. Everybody thinks you have some crazy motor since you have a 3" charge pipe peaking out.

There are adapter brackets that you need for the evo calipers. I can include them for an additional $150 so they will be a bolt on affair.

Syncade
09-25-2008, 10:23 AM
No way that would fit without trimming. Nice pipes though. Bump for a fellow neo

rivaracingrb25
09-25-2008, 12:14 PM
how easy is it to trim carbon? bump 4 sho, it would look sick to have the charge pipe peekin across the center of the hood.

Oo_Skyline_oO
09-25-2008, 12:44 PM
I'll take the piping....

Xracer
09-25-2008, 08:25 PM
Well i haven't had anybody pay up yet.

To trim carbon you need to tape up the area that you are going to trim. If you dont, the end of the fibers will fray out when you cut.

ch1873857
09-29-2008, 01:42 AM
that piping will not bolt up on an rb20 (why I didn't buy it) the tb on the 20 is right before the intake side valve cover. the neo pictured come all the out in between the two valve covers.

Xracer
09-30-2008, 07:35 PM
Thanks for clearing that up. I didn't notice that.

Bump. Items still for sale, shoot me offers.