PDA

View Full Version : CA <FS> bolt-in roll cage S13 fastback $300


mav1178
09-17-2008, 01:15 PM
http://www.alexchang.net/Ebay/IMG_0386.JPG

http://www.alexchang.net/Ebay/IMG_0387.JPG

http://www.alexchang.net/Ebay/IMG_0388.JPG

http://www.alexchang.net/Ebay/IMG_0389.JPG


I was going to run this in my S13 once I turn it into a track-only car, but since I am unsure of when I will build my car, the cage is taking up space and not really needed.

I bought this used. Selling it for same price I bought it for.

The cage came out of a S13 hatchback. The cage is a pretty unique design; the front half is "bolted" to the rear half.

It is made out of mild steel; pretty heavy and I am not really concerned about wall thickness of the cage.

As-is you can run it with harness (the middle bar can be used as a harness bar) and it will be perfectly fine for track use. If you want to have a cross bar welded on the main hoop you can have it done. It is bolt-in but you can also have it welded to the car at your discretion.

The front half of the cage has one of the legs cut, but you can have it redone. The cage originally had provisions for the door beam, but you can have it made later or leave it out.

If you have someone bend a cage like this, it will cost you usually at least ~$600-800.

Obviously I cannot ship this, and forget about picking this up in the back of your S13 fastback.

PM me for more information. $300 is a steal.

-alex