Brian
09-16-2008, 11:34 AM
BLITZ 03. 17x9+19 5x114.3 (pair)
http://media.ziptied.com/members/files/2/Blitz%2003%20pair.jpg
So, these came off a R32 GTR apparently.
I had them refinished as you can see. Never used them since then.
They are pretty damn hot. full polished and gold bolts.
This is only for a pair only.
Blitz type 03 is a discontinued wheel now, but was HEAVILY popular on drift cars around 2000. I called Blitz USA today and they happen to have a pair of 18x10+22 left in stock if you want to complete a 17/18 set.
I hate to sell these, but I am going to go a different route with wheels.
Retail is $858 per wheel brand new.
I want $700 for this pair of wheels, or best offer
Located in Long Beach area.
Work Meister S2R 17x9 +16 5x114.3 (FULL SET)
I am thinking about selling my nice set of wheels.
Work Mesiter S2R.
Pretty sure the size is 17x9 +16.
I bought these from a forum member a while ago and got them in SHITTY condition.
Because of this, I had them all completly refinished and polished out.
They all have tires on them
Front - Federal 595ss 215/40-17 heavily used, but still work fine.
Rear - Federal 595ss 215/45-17 Brand new.
They are still in pretty good condition, but could use a nice cleaning to look spic and span.
There is some curb rash on one of them because I was an idiot.
Also, the holes for the lug nuts have some wear because they take really small lug nuts and the key rubs the actual wheel, so I had to "clearance" it myself.
One of the rears needs a new valve stem. I mounted new tires and realized one wont hold air because the rubber piece on the valve stem has a small cut somewhere.
I will order a new one from WORK today, so no worries for you.
Located in Socal - Paramount/Long Beach/Lakewood
Asking for $1500 with tires and wheels
http://media.ziptied.com/members/files/2/WORKS.jpg
S13 hatch rear seats
They are stock rear seats and gray. Probably have stains and whatnot.
$10
<<<FOR SALE>>> S13 Rear Tower Bar
For sale is a S13 rear Tower bar.
I got this used and then painted the ends Yellow.
So this is now actually a BH SPL Tower bar.
Please buy it for the low price of $50
http://media.ziptied.com/members/files/2/Bh%20Tower%20Bar.jpg
You take off the 2 12mm nuts on each side.
Place this bar on there
Put 12mm nuts back on.
BAM! so stiff.
Ohhh it is so stiff now.
<<^<FS>^>> Battle Version S14 Tension rods
I have a used set of Battle Version tension rods for sale.
One of them is good.
One of them is bent.
Maybe just buy them to have a spare tension rod at the track eh?
This is an OLD model of them too. I think maybe the original batch that Alex made.
http://media.ziptied.com/members/files/2/tension%20rods%20BV.jpg
I would like $35 for the pair of these.
http://media.ziptied.com/members/files/2/Blitz%2003%20pair.jpg
So, these came off a R32 GTR apparently.
I had them refinished as you can see. Never used them since then.
They are pretty damn hot. full polished and gold bolts.
This is only for a pair only.
Blitz type 03 is a discontinued wheel now, but was HEAVILY popular on drift cars around 2000. I called Blitz USA today and they happen to have a pair of 18x10+22 left in stock if you want to complete a 17/18 set.
I hate to sell these, but I am going to go a different route with wheels.
Retail is $858 per wheel brand new.
I want $700 for this pair of wheels, or best offer
Located in Long Beach area.
Work Meister S2R 17x9 +16 5x114.3 (FULL SET)
I am thinking about selling my nice set of wheels.
Work Mesiter S2R.
Pretty sure the size is 17x9 +16.
I bought these from a forum member a while ago and got them in SHITTY condition.
Because of this, I had them all completly refinished and polished out.
They all have tires on them
Front - Federal 595ss 215/40-17 heavily used, but still work fine.
Rear - Federal 595ss 215/45-17 Brand new.
They are still in pretty good condition, but could use a nice cleaning to look spic and span.
There is some curb rash on one of them because I was an idiot.
Also, the holes for the lug nuts have some wear because they take really small lug nuts and the key rubs the actual wheel, so I had to "clearance" it myself.
One of the rears needs a new valve stem. I mounted new tires and realized one wont hold air because the rubber piece on the valve stem has a small cut somewhere.
I will order a new one from WORK today, so no worries for you.
Located in Socal - Paramount/Long Beach/Lakewood
Asking for $1500 with tires and wheels
http://media.ziptied.com/members/files/2/WORKS.jpg
S13 hatch rear seats
They are stock rear seats and gray. Probably have stains and whatnot.
$10
<<<FOR SALE>>> S13 Rear Tower Bar
For sale is a S13 rear Tower bar.
I got this used and then painted the ends Yellow.
So this is now actually a BH SPL Tower bar.
Please buy it for the low price of $50
http://media.ziptied.com/members/files/2/Bh%20Tower%20Bar.jpg
You take off the 2 12mm nuts on each side.
Place this bar on there
Put 12mm nuts back on.
BAM! so stiff.
Ohhh it is so stiff now.
<<^<FS>^>> Battle Version S14 Tension rods
I have a used set of Battle Version tension rods for sale.
One of them is good.
One of them is bent.
Maybe just buy them to have a spare tension rod at the track eh?
This is an OLD model of them too. I think maybe the original batch that Alex made.
http://media.ziptied.com/members/files/2/tension%20rods%20BV.jpg
I would like $35 for the pair of these.