Red Top vs Black top

[Raikoh]

The SR20 there's a red top and a black top. Is there a difference in the two?

Sorry I sound Kinda dumb but I don't know nissan's very well. I jsut picked my 95 240 up and I"m sellin my civic. To afford the engine but I was just wondering what the difference is.

Thanks

[SexPanda]

SEARCH

this has been asked about 1,000,000 times...

[sillydrift]

S13 Red Top SR20DET
Specifications
180SX 91-93 and Silvia 91-93
Displacement: 1998cc (2.0 liter)
Cam type: DOHC 16 valve, chain driven cam sprockets
Bore and stroke: 86mm x 86mm
Compression: 8.5 : 1


S13 Black Top SR20DET
Specifications
180SX 94-98
Displacement: 1998cc (2.0 liter)
Cam type: DOHC 16 valve, chain driven cam sprockets
Bore and stroke: 86mm x 86mm
Compression: 8.5 : 1


I'm in a good mood so I searched for you, the search button can be helpfull, you should try using it.
Find all you need here Heavy Throttle (http://heavythrottle.com/)

[Addicted2Kouki]

Are you sure we can't bring the rep system back?:faint:

[Mikey88]

^^^yah that would be all bad for him.... nothing really except the head on the s13 black top has forgings on the front. and unless you plan on gettin an s14 SR then thats a whole different story

[ALEXTHESUS*PECT]

will a jdm sr fit in where my ka is now?

sorry for the noob question, but i am new here!

[96Turbo]

Are you sure we can't bring the rep system back?:faint:
it did have its benefits..........

will a jdm sr fit in where my ka is now?

sorry for the noob question, but i am new here!

of course it will! it's really easy. you get that shiny red valve cover, it bolts right onto your KA, and gives you 30hp!!! not to mention the jdm tyteness

[SantIR]

will a jdm sr fit in where my ka is now?

sorry for the noob question, but i am new here!

no.. you will have to first remove the wiper fluid to ensure the clearence of the trany bell house.. then you have to remove the passenger fender, cut through the frame and reweld that bitch once you weld the oil pan to the drivers side of the frame..

once you have done that you have to remove the steering wheel and relocate in to the trunk..

then its just a matter of SEARCHING YOU TOOL!!!!!!!!!

[SidewayZ-s14]

no.. you will have to first remove the wiper fluid to ensure the clearence of the trany bell house.. then you have to remove the passenger fender, cut through the frame and reweld that bitch once you weld the oil pan to the drivers side of the frame..

once you have done that you have to remove the steering wheel and relocate in to the trunk..

then its just a matter of SEARCHING YOU TOOL!!!!!!!!!

Not funny. Bring the rep system so we can neg rep this guy as well.

[singlecamslam]

Whats the difference between hotdogs and corndogs? Dont buy either, thats what.

[eek]

Please bring back the rep system.