PS issues on SR

[the head]

I was working on my car the other day and noticed a PS fluid leak from around the banjo bolt on the PS pump tried tightening the bolt but that didnt work to stop the leak. Does anyone have the thread pitch of that bolt? I will just get a metric AN adapter and run it from there all my PS system is braided hose anyway so it is pretty easy if I can get the pitch on the banjo bolt.

[codyace]

EAR-991955ERL For the one side of the rack and the pump

EAR-9919DFHERL for the other side of the rack


Hopefully that helps you out :D

[the head]

Nope the car is already setup with AN fittings on the rack I need the thread size and pitch of the Banjo bolt on the pump

[FRoSt415]

what you can do that worked for me is to drain the fluids then unbolt the line and put some Teflon tape and liquid thread sealant(for liquids not thread locker but that might work,never did it though).

[n240sxfnatic]

this is the size of the banjo bolt 16MMx1.5 (RUS-670530)

[Teambadrun]

Ive got a tonload of them bolts. IS your pump non hicas????? Try new copper washers, mine was leaking the other day ( as the hose is still CA and it's now SR)

[fliprayzin240sx]

+1 on the copper washers, thats probably why its leaking.

[codyace]

Nope the car is already setup with AN fittings on the rack I need the thread size and pitch of the Banjo bolt on the pump

Haha, that larger one also doubles on the pump! My fault for not typing the entire thing hehe.