seanc
09-14-2008, 05:08 PM
ok swapping in a s13 sr in a s13 calum ecu 650cc injectors and z32 maf only things that arent stock. ok the car would start then die. so i decided to pull off the fuel rail which has pressure, then i pulled off the coil packs and then the CAS now when i first start to rotate the CAS the 4 injectors will fire a short small squirt of fuel then after that if you continue to rotate the CAS, like the engine was running, no fuel squirts again, although all the coil packs fire at the appopriate time. then if you stop rotating and start again the injectors will give a small squirt. all injectors have 12v and they get the ground signal at first then nothing. all injector signal wires are ok, checked with a ohm meter. any ideas? thanks!